Items where School / Department / Research Groups is "School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis"

University Structure (5805)
- School of Computing & Mathematical Sciences (993)
  - Centre for Numerical Modelling & Process Analysis (412)
    - Computational Mechanics & Reliability Group (153)
    - Computational Science & Engineering Group (165)
    - Fire Safety Engineering Group (137)

Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping

(CFD) 3-D computational model 3D-miniaturised systems 500 kA reduction cell 63Sn37Pb solder joints 9/11 AASK AASK (Aircraft Accident Statistics and Knowledge) AASK database AC and DC fields AC electrodynamics AC electromagnetic field accelerated temperature cycle accelerated testing accident scenarios ACF acoustic correction methods acoustic emission acoustic pertubation acoustic wave equation acousticcorrection active matrix liquid crystal display adaptive decision-making adaptive partition adhesive adhesive materials adhesives advanced solidification processes aeroacoustics aerospace applications ageing aging air pollution aircraft aircraft accident aircraft emergency evacuation aircraft evacuation airEXODUS airEXODUS evacuation simulation airEXODUS evacuation software algorithm algorithms aluminium aluminium electrolysis aluminium electrolysis cells aluminium production aluminium wirebonds AMLCD analysis tools analytical models and alloys and failure anisotropic conductive film anisotropic conductive film (ACF) applied mathematics articulated trains Asian American Options assembly analysis assembly process technology assembly trials atmospheric pollution ATTMA "Aerosol Transport Au/Ni metallization aviation accident reports aviation accidents aviation safety ball grid array (BGA) ball shear test Bayesian Networks (BN) binary alloy biofluid behaviour biomedical engineering block-structured mesh blood plasma separation blood preparation bond strength boundary element method Brazil breakage matrix brittleness bubbles buildingEXODUS buildingEXODUS escalator model buildingEXODUS evacuation model buildingEXODUS software bumps business data processing C++ calculation methods car carbon monoxide case based reasoning case study casting cell-centred Centre for Numerical Modelling certification requirements CFD CFD analysis CFD fire simulation cfd modelling CFD simulation chemical engineering chemistry chip mountdown solder chip-on-board (COB) assembly chip-on-flex (COF) circuits circulation model Civil Aviation Authority coded evacuation experiences cognition cognitive mapping cold crucible cold crucible furnaces cold crucible melting collection collocated variables comparative narratives compartment fires compiler directives composite composite materials computational computational fluid dynamics computational fluid dynamics (CFD) computational mechanics computational modeling computational modelling computational solid mechanics computational speed computer egress simulation computer model computer modelling computer simulation computer software computer-aided design conductive particle constituitive modeling constitutive law contact angle contact resistance contactless contamination continuous casting Continuous Wavelet Transform (CWT) continuum model convection oven conveyor systems cooling efficiency coordinate transformation copper copper track designs corrosion fatigue coupled electromagnetic and heat transfer computations coupled mass/spring system coupled mechanical-acoustic system coupled simulation coupled solution coupling crack propagation cracking crash dynamics crash simulation crashworthiness creep curves crowd formations crucibles crystal growth CSM Cu trace cure cure data cure kinetics cure process curing curing encapsulant materials curing process curing processes current crowding current stressing Cutty Sark cyclic thermal-mechanical loading damage mechanisms data analysis database DC-DC DC-DC power converter decision making decision support system defect correction deference behavior deformation degradation tester dendritic growth dendritic-growth denoise density dental composites dental materials dental wear deposition design design for manufacture Design for Reliability modelling design methodology Design of Experiment (DoE) method design of experiments Design of Experiments (DoE) design optimistation design-for-reliability die attach dielectric material differential scanning calorimetry (DSC) differential equations differential scanning calorimetry diffusion diffusion problem digital simulation dilute phase pneumatic conveying distributed manipulation distributed processing droplet generation droplet oscillations drug delivery dynamic load balancing dynamic multiphysics modelling dynamics eddy dissipation model (EDM) effluent toxicity egress egress strategy egress times elasto-visco plasticity electric aircraft electric car electrical configurations electrical connections electro-metallurgy electrodeposition electromagnetic electromagnetic field electromagnetic force electromagnetic forces electromagnetic levitation electromagnetic processing electromagnetic processing of materials (EPM) electromechanical devices electromigration electron bombardment electronic applications electronic components electronic engineering electronic packaging electronic product design electronic products electronics electronics design electronics industry electronics packaging electroplating embedded die embrittlement emergency evacuation emergency signage EML emotional arousal encapsulant encapsulant curing enclosure fire enclosure fires end-fed probes energy energy efficiency enthalpy equations equiaxed crystal morphology escalator estimate of cure Eulerian Finite Volume type models evacuation evacuation analysis evacuation dynamics evacuation experience evacuation experiences evacuation model evacuation modelling evacuation models evacuation procedure evacuation simulation evacuation simulations evacuation time evacuation times evacuation trials evaluation evaluation methodologies evolutionary search existence uniqueness theorem exit availability exit awareness exit configuration exit configurations experimental study explosions external fuel fire fabrication face-to-face interviews failure failure analysis failure based reliability failure mechanisms failure modes failure modes and mechanisms fatigue fatigue life-time FEA ferrous operations fibre bond failure fibre failure fibre/fibre bond failure financial modelling finite difference finite difference method finite element finite element (FE) method finite element analysis finite element analysis (FEA) Finite Element Analysis(FEA) finite element modelling finite volume finite volume method finite volume methods finite-element model fire fire design fire field fire field model fire field modelling fire investigation fire modelling fire modelling expertise fire safety fire safety codes fire simulation first-hand accounts flashover flashover time Flex-No-Lead project flexible substrates flexible-substrates flip-chip assembly flip-chip packaging flip-chip underfills flow flow induced cavity noise flow solution fluid fluid dynamics fluid flow fluid flow problems fluid mechanics flux focused ion beam Focused Ion Beam (FIB) method foil Fourier transform infra-red spectroscopy (FTIR) fourth-order partial diffusion equation fractal fractal image compression Fractal video compression fractals Fractional Effective Dose (FDE) fracture fracture mechanics fracture propogation path freckle formation free surface free surface dynamics free surface instability freeze layer modelling frequency agile microwave oven bonding system (FAMOBS) gas atomization gas flow genetic algorithms glass transition temperature glob top globtop globtop design granular flow granular material granular mixtures graph partitioning graph-partitioning gravity hazard evaluation heaping heat heat conduction heat engineering heat exchangers heat sensitive film heat sinks heat transfer heating HEED database Helmholtz high current density induced damage high density interconnection technology high density packaging high rise building high rise buildings high-rise building high-rise building evacuation high-rise buildings High-rise Evacuation Evaluation Database (HEED) High-rise Evaculation Evaluation Database (HEED) historic human behaviour human experience in evacuation human experience of evacuation human factors Human Performance Metric hybrid method hybrid vibro-acoustic model hydrodynamics hydrogen chloride hydrological modelling hydrological transport model IGBT module image processing IMO impact IMPRESS individual surface mount components induction induction heating induction melting induction skull melting (ISM) industrial processes information theory information visualisation inpainting integrated software module integration interaction design interactions interface problems interface wave interface waves interfacial reaction interfacial reaction phenomena intermetallic compound intermetallic compound (IMC) intermetallic compound layer internal combustion engines interviews inverse problem investment casting iochemical engineering isolation substrate isotropic conductive adhesives (ICAs) iterative parallelization jet impingement cooling system joints K-Omega turbulence model kinematic-hardening knowledge database lab-on-a-chip laboratories Lagrangian Particle Dispersion (LPD) models Lagrangian particle tracking laminar fluid flow Laplace transform laplacian large-scale engineering processes Laser Doppler Anemometry laser spot weld formation LCD backlighting LDA lead free applications lead free solder lead free solder interconnects lead-free soldering lead-free solders level set method levitation library facilities life prediction life-time LIGA light emitting diode (LED) liquid metal liquid metal induction heating liquid metals live incidents local equivalence ratio log-normal distribution logistic squashing function loss modulus low power tests low temperature (T<100 C) low-loss dielectric lumped systems magnetic field magnetic fields magnetic levitation magnetic levitation of liquid droplets magnetohydrodynamic Magnetohydrodynamics manufactures manufacturing process manufacturing processes manufacturing systems maritimeEXODUS mass transfer material physical properties material properties materials processing mathematical modelling mathematical models mathematical statistics mathematics Maxwell's equations MCWASP MDH measured temperatures mechanics megasonic agitation melting melting furnaces melting/solidification memory mesh generation message passing metal metal casting metal melting metals metals casting metals reduction process methodological tools methodologies metrics MHD MHD flow MHD instabilities MHD instability MHD stability Micro-electronic displays micro-electronics manufacture micro-machining process micro-manufactured micro-probe microassembly microchannel biochip separator microchannel systems microchannels microelectronics microelectronics manufacturing microelectronics packaging microfabricated solenoid inductor microfeeder microfluidics microgravity materials research microinductor microinductors microsystem design microsystems microvias microwave microwave curing microwave curing system microwave energy microwave heating microwave oven microwave processing microwave radiation microwave system microwave systems microwave thawing of frozen food microwaves Miner's linear damage accumulation modeling modeling iron modelling modelling analysis modelling biofluids modelling methodology modelling technologies modified EDM moisture momentum mould mould design mould filling moving interfaces moving meshes MPI multi-grid multi-phase flow multi-physics multi-physics modelling multi-scale multilevel optimisation multilevel refinement multiphase flow multiphyics problems multiphysics multiphysics analysis multiphysics modelling multiscale modeling Nano-Imprint Forming (NIF) nano-techology nanotechnology narrow body aircraft naval architecture Navier-Stokes neural networks non-articulated trains non-linear Black-Scholes equation non-linear transient finite element simulations nonlinear waves numerical analysis numerical analysis of ODE numerical diffusion numerical model numerical modelling numerical modelling tools numerical models numerical optimisation numerical optimisation techniques numerical PDE numerical schemes numerical simulation numerical simulations numerical solution Nusselt number NXP observation occlusion off-chip interconnection off-gas ducting system Oldroyd-B on-chip interconnection one turn inductor open area open-ended microwave curing system open-ended microwave oven open-ended waveguide cavity oven open-oven openMP operations research OPISA optical interconnects optical performance optimal location optimisation optimization optimization of solder optimization tools option pricing opto-electronic assembly optoelectronic packaging ordinary differential equations organic light emitting diodes (OLED) oscillating droplet technique package design parameters packaged modules packaging packaging design packaging technology paper paper fibre matrix parallel parallel algorithm parallel computing parallel genetic algorithm parallel processing PARAMARINE partial differential equation (PDE) partial differential equations particle interaction particle swarm optimisation algorithm particle swarm optimization particle-laden flows particulate transport passenger exit selection passenger response time distributions passenger response times Pb-free solder PC pedestrian behaviour pedestrian dynamics pedestrian escalator behaviour performance measures personnel movement photonics PHYSICA physical and theoretical fluid mechanics physics physics of failure techniques Physics-of-failure (PoF) model pipe pipe flow pipe fluid mechanics pneumatic conveying pneumatic conveyors polymer polymer cure kinetics models polymer cure models polymer curing polymer encapsulant polymer materials curing polymers post-crash cabin fire post-crash fire potting cure Power Electronic Module (PEM) power electronic modules power electronic modules (PEMs) power electronics power electronics module power electronics modules power electronics modules (PEMs) power module components power supply circuits pre-evacuation time data prediction models predictive reliability pressure wave contours probability based analytical tools process efficiency process engineering industry process simulation prognostic and health management (PHM)systems prognostics prediction methodology programming property measurements prototyping pseudo-spectral technique pumping machinery pure mathematics quasi-Newton methods radiative fluxes radio frequency (RF) curing rail cab collapse rail safety rail vehicle collision rail vehicle design Rayleigh number reciprocating engines recognition phase rectangular microchannel rectangular pipe reduced order modelling (ROM) reduced order models reduced order models (ROM) relative permittivity reliability reliability management reliability prediction reliability prediction techniques remelting renewable energy research profile residual resonant cavity response phase response surface models Response Surface Models (RSM) response time distributions Reynolds number Reynolds-averaged Navier-Stokes (RANS) equations RF-ID tag bonding Rhie-chow interpolation Richard's equation risk assessment risk mitigation risk perception rotation run time Runge-Kutta methods Saharan dust storms sampling scaling effect scaling laws Schraudolph sedimentation segregation semi-Lagrange time integration semimetals September 11 terrorist attacks sewage shallow layer shape casting ship ship design ship evacuation side-by-side dies signage signage systems signal processing SIMD extensions 2 simulation simulation software simulations SiP SiP structure SiP technology slag-refractory interactions slurry SMARTFIRE smelting processes software technology software tools and environment solder solder interface strength solder joint solder joint failure solder joints solder-mask defined joints solid state physics solidification solids solute diffusion sound source extraction spatial representation species calculation species concentrations spectral code spectral methods square room stacked die staggered mesh staggered mess staggered methods stair merging behavior stcked die steelmaking steelmaking processes storage storage modulus strain gauge stress stress analysis stress and strain distribution structural bonding structural dynamic systems structure substrate delamination sun-roof surface tension SURFCON survivability survivable aviation accidents survivor experiences survivors sustainable architectural design sustainable architecture sustainable design Swissair Swissair flight 111 System-in-Package (SiP) structures systematic partitioning T-microchannel device technology terrorism testing thawing thermal cycling thermal cycling reliability thermal fluids thermal modeling thermal resistance thermal stresses thermal-mechanical loading thermo-mechanical thermo-mechanical behaviour thermo-mechanical reliability thermo-mechanical reliability analysis thermo-mechanics thermo-physical properties thermodynamics thermoelectric MHD thermoelectricity thermomechanical stress development thermomigration thermosetting polymer thermosetting polymer materials thickener thickening tilt-casting time dependent modelling time to flashover titanium alloys titanium alumindes titanium aluminide titanium casting titanium castings titanium powder production tooth wear total variation toxic combustion products toxicity Trans-Manche Atmosphere" project travel time turbulence models turbulence predictions turbulent flow turbulent thermal losses uncertainty analysis uncertainty analysisfatigue life-time undercooling underground station uniform random distribution unsaturated porous media unstructured unstructured mesh vacuum arc remelting (VAR) Vacuum Arch Remelting (VAR) validation valves (mechanical) VAR VAR process variable frequency microwave (VFM) variable frequency microwave (VFM) heating Variable Frequency Microwave (VFM) system variable frequency microwave technology various exiting combinations VCA vectors velocity video compression viscoelastic viscoplastic model viscosity visibility visibility catchment area visual impairment vitiated fires Wafer Level Packaging (WLP) wafer processing wafer scale level packaging warpage water water curtain barrier water model water movement water pollution waveguide cavity resonator waveguide resonator wavelet compression wayfinding welding wetting wetting behaviours wetting force wind wire bond fatigue wire bonds wirebond World Trade Center World Trade Center (WTC) World Trade Center (WTC) Twin Towers World Trade Centre WTC

Number of items at this level: 301.

(CFD)

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur, Cross, Mark, Bridle, Ian, Abou-Chakra, Hadi and Baxter, John (2002) Utilising computational fluid dynamics (CFD) for the modelling of granular material in large-scale engineering processes. In: Computational Science — ICCS 2002: International Conference Amsterdam, The Netherlands, April 21–24, 2002 Proceedings. Lecture Notes in Computer Science, Part 1 (2329). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 743-752. ISBN 978-3-540-43591-4 (Print), 978-3-540-46043-5 (Online) ISSN 0302-9743 (Print), 1611-3349 (Online) (doi:10.1007/3-540-46043-8_75)

3-D computational model

Wang, H., Djambazov, G., Pericleous, K.A., Harding, R.A. and Wickins, M. (2011) Modelling the dynamics of the tilt-casting process and the effect of the mould design on the casting quality. Computer & Fluids, 42 (1). pp. 92-101. ISSN 0045-7930 (doi:10.1016/j.compfluid.2010.11.010)

3D-miniaturised systems

Stoyanov, Stoyan, Amalou, Farid, Sinclair, Keith I., Bailey, Christopher and Desmulliez, Marc P.Y. (2008) Modelling of nano-imprint forming process for the production of miniaturised 3D structures. In: International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2008. EuroSimE 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 497-504. ISBN 978-1-4244-2127-5 (doi:10.1109/ESIME.2008.4525088)

500 kA reduction cell

Dupuis, Marc, Bojarevics, Valdis and Richard, Daniel (2008) Impact of the vertical potshell deformation on the MHD cell stability behavior of a 500 kA aluminium electrolysis cell. In: Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 409-412. ISBN 978-0-87339-710-0

63Sn37Pb solder joints

Wu, B.Y., Chan, Y.C, Zhong, H.W. and Alam, M.O. (2007) Effect of current stressing on the reliability of 63Sn37Pb solder joints. Journal of Materials Science, 42 (17). pp. 7415-7422. ISSN 0022-2461 (Print), 1573-4803 (Online) (doi:10.1007/s10853-007-1836-y)

9/11

Galea, E.R., Sharp, G., Lawrence, P.J. and Holden, R. (2008) Approximating the evacuation of the World Trade Center North Tower using computer simulation. Journal of Fire Protection Engineering, 18 (2). pp. 85-115. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/1042391507079343)

McConnell, N.C., Boyce, K.E., Shields, J., Galea, E.R., Day, R.C. and Hulse, L.M. (2010) The UK 9/11 evacuation study: analysis of survivors’ recognition and response phase in WTC1. Fire Safety Journal, 45 (1). pp. 21-34. ISSN 0379-7112 (doi:10.1016/j.firesaf.2009.09.001)

AASK

Galea, Edwin R., Finney, Kate M., Dixon, Andrew J., Siddiqui, Asim and Cooney, David P. (2006) Aircraft accident statistics and knowledge database: analyzing passenger behavior in aviation accidents. Journal of Aircraft, 43 (5). pp. 1272-1281. ISSN 0021-8669

AASK (Aircraft Accident Statistics and Knowledge)

Owen, M., Galea, E.R., Lawrence, P.J. and Filippidis, L. (1999) An aircraft accident database of human experience in evacuation derived from aviation accident reports. Fire and Materials, 23 (6). pp. 363-368. ISSN 0308-0501 (doi:10.1002/(SICI)1099-1018(199911/12)23:6<363::AID-FAM712>3.0.CO;2-D)

AASK database

Galea, Edwin R., Togher, Madeleine and Lawrence, Peter (2007) Investigating the impact of exit availability on egress time using computer based evacuation simulation. In: Proceedings of the 5th Triennial International Fire and Cabin Safety Research Conference, Atlantic City, 29 Oct.-1 Nov. 2007. Federal Aviation Administration, Washington DC.

AC and DC fields

Pericleous, Koulis A. and Bojarevics, Valdis (2007) The study of flow and temperature fields in conducting droplets suspended in a DC/AC combination field. Current Advances in Materials and Processes , 20 (4). p. 796. ISSN 0914-6628

AC electrodynamics

Bojarevics, Valdis, Roy, Alan and Pericleous, Koulis (2011) Numerical model of electrode induction melting for gas atomization. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 30 (5). pp. 1455-1466. ISSN 0332-1649 (doi:10.1108/03321641111152612)

AC electromagnetic field

Bojarevics, Valdis, Pericleous, Koulis A., Harding, R and Wickins, M (2006) Cold crucible melting of reactive metals using combined DC and AC magnetic fields. In: The 5th International Symposium on Electromagnetic Processing of Materials (EPM 2006), October 23-27, 2006, Sendai, Japan.

Bojarevics, Valdis, Taniguchi, S and Pericleous, Koulis A. (2006) Droplet generation with modulated AC electromagnetic field at nozzle exit. In: Proceedings of the 5th International Symposium on Electromagnetic Processing of Materials. The Iron and Steel Institute of Japan, Tokyo, pp. 259-270. ISBN 978-4-930980-55-7

accelerated temperature cycle

Bailey, Christopher, Stoyanov, Stoyan, Strusevitch, Nadia and Yannou, J.-M. (2007) Reliability analysis of SiP structures. In: HDP'07: Proceedings of the 2007 International Symposium on High Density Packaging and Microsystem Integration. Institute of Electrical and Electronics Engineers, Inc., New York, p. 38. ISBN 9781424412525 (doi:10.1109/HDP.2007.4283556)

accelerated testing

Bailey, Christopher, Tilford, Tim and Lu, Hua (2007) Reliability analysis for power electronics modules. In: 2007 30th International Spring Seminar On Electronics Technology. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 12-17. ISBN 9781424412174 (doi:10.1109/ISSE.2007.4432813)

accident scenarios

Galea, Edwin R. (2006) Proposed methodology for the use of computer simulation to enhance aircraft evacuation certification. Journal of Aircraft, 43 (5). pp. 1405-1413. ISSN 0021-8669 (doi:10.2514/1.20937)

ACF

Rizvi, M.J., Bailey, Christopher and Lu, Hua (2008) Failure mechanisms of ACF joints under isothermal ageing. Microelectronics Journal, 39 (9). pp. 1101-1107. ISSN 0026-2692 (doi:10.1016/j.mejo.2008.01.045)

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

acoustic correction methods

Wang, Z.-K., Djambazov, G.S., Lai, C.-H. and Pericleous, K.A. (2008) Numerical investigation of a source extraction technique based on an acoustic correction method. Computers & Mathematics with Applications, 55 (3). pp. 441-458. ISSN 0898-1221 (doi:10.1016/j.camwa.2004.08.017)

acoustic emission

Kao, David, Graham, Deryn, Knight, Brian and Pericleous, Koulis A. (2007) A mathematical description of the acoustic coupling of the mass/spring model. Applied Mathematical Modelling, 31 (12). pp. 2684-2695. ISSN 0307-904X (doi:10.1016/j.apm.2006.10.016)

acoustic pertubation

Wang, Zong-Kang, Djambazov, Georgi, Lai, Choi-Hong and Pericleous, Koulis A. (2007) Numerical simulation of flow-induced cavity noise in self-sustained oscillations. Computing and Visualization in Science, 10 (3). pp. 123-134. ISSN 1432-9360 (doi:10.1007/s00791-006-0039-4)

acoustic wave equation

acousticcorrection

Wang, Z.K., Djambazov, G.S., Lai, C.-H. and Pericleous, K.A. (2004) An acoustic correction method for extracting sound signals. Computers & Mathematics with Applications, 47 (1). pp. 57-69. ISSN 0898-1221 (doi:10.1016/S0898-1221(04)90005-3)

active matrix liquid crystal display

Lee, Yek, Bailey, Christopher, Lu, Hua, Riches, Steve, Bartholomew, Martin and Tebbit, Nigel (2006) Thermo-mechanical analysis of the packaging process for micro-electronic displays. In: 7th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2006. EuroSime 2006. IEEE Computer Society, pp. 190-195. ISBN 1 4244 0275 1 (doi:10.1109/ESIME.2006.1644051)

Lee, Yek, Bailey, Christopher, Riches, Steve and Bartholomew, Martin (2006) Predicting the behaviour of micro-electronic displays using computational mechanics. In: 14th Annual Joint Conference of the Association for Computational Mechanics in Engineering (ACME) and the Irish Society for Scientific and Engineering Computation (ISSEC), Queen's University of Belfast.

adaptive decision-making

Gwynne, S., Galea, E.R., Lawrence, P.J., Owen, M. and Filippidis, L. (1999) Adaptive decision-making in response to crowd formations in building EXODUS. Journal of Applied Fire Science, 8 (4). pp. 301-325. ISSN 1044-4300 (Paper), 1541-4183 (Online) (doi:10.2190/CMPP-39TC-TNL3-R63Q)

adaptive partition

Wang, Meiqing and Lai, Choi-Hong (2007) Grey video compression methods using fractals. International Journal of Computer Mathematics, 84 (11). pp. 1567-1590. ISSN 0020-7160 (doi:10.1080/00207160601178299)

Wang, Meiqing, Liu, Rong and Lai, Choi-Hong (2006) Adaptive partition and hybrid method in fractal video compression. Computers & Mathematics with Applications, 51 (11). pp. 1715-1726. ISSN 0898-1221 (doi:10.1016/j.camwa.2006.05.009)

adhesive

Rizvi, M.J., Lu, H., Bailey, C., Chan, Y.C., Lee, M.Y. and Pang, C.H. (2008) Role of bonding time and temperature on the physical properties of coupled anisotropic conductive-nonconductive adhesive film for flip chip on glass technology. Microelectronic Engineering, 85 (1). pp. 238-244. ISSN 0167-9317 (doi:10.1016/j.mee.2007.05.045)

adhesive materials

Goussetis, George, Sinclair, Keith I., Sangster, Alan J., Desmulliez, Marc P.Y., Tilford, Tim, Parrott, Kevin and Bailey, Christopher (2007) Microwave curing for high density package. In: 2007 International Symposium on High Density Design Packaging and Microsystem Integration. Institute of Electrical and Electronics Engineers, Inc., New York, p. 1. ISBN 9781424412525 (doi:10.1109/HDP.2007.4283552)

adhesives

Bailey, Christopher, Rizvi, M.J., Yin, Chunyan, Lu, Hua and Stoyanov, Stoyan (2007) Application of modelling for predicting the behaviour of polymers and adhesives in microelectronic and photonic devices. In: 6th International Conference on Polymers and Adhesives in Microelectronics and Photonics. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 240-244. ISBN 9781424411863 (doi:10.1109/POLYTR.2007.4339175)

advanced solidification processes

Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL , pp. 741-748. ISBN 0873395557

aeroacoustics

aerospace applications

Keye, Stefan (2003) Model updating of modal parameters from experimental data and applications in aerospace. PhD thesis, University of Greenwich.

ageing

aging

Rizvi, M.J., Bailey, Christopher, Chan, Y.C., Islam, M. and Lu, Hua (2007) Effect of adding 0.3wt% Ni into the Sn-0.7wt% Cu solder - Part II: Growth of intermetallic layer with Cu during wetting and aging. Journal of Alloys and Compounds, 438 (1-2). pp. 122-128. ISSN 0925-8388 (doi:10.1016/j.jallcom.2006.08.071)

air pollution

Vardoulakis, Sotirios (2002) An operational method for assessing traffic-related air pollution in urban streets. PhD thesis, University of Greenwich.

aircraft

Galea, Edwin R., Togher, Madelein and Lawrence, Peter (2010) Investigating the impact of aircraft exit availability on egress time using computer simulation. In: Pedestrian and Evacuation Dynamics 2008. Springer-Verlag, Berlin / Heidelberg, Germany, pp. 411-423. ISBN 978-3-642-04503-5 (Print), 978-3-642-04504-2 (Online) (doi:10.1007/978-3-642-04504-2_35)

aircraft accident

aircraft emergency evacuation

Galea, Edwin R. and Lawrence, Peter (2009) An investigation of passenger exit selection decisions in aircraft evacuation situations. In: Human Behaviour in Fire 2009 - Conference Proceedings. Interscience Communications Ltd., Greenwich, London, UK, pp. 421-432. ISBN 978-0-9556548-3-1

aircraft evacuation

airEXODUS

airEXODUS evacuation simulation

Galea, Edwin R., Wang, Zhaozhi, Togher, Madeleine, Jia, Fuchen and Lawrence, Peter (2007) Predicting the likely impact of aircraft post crash fire on aircraft evacuation using fire and evacuation simulation. In: Proceedings of the 5th Triennial International Fire and Cabin Safety Research Conference, Atlantic City, 29 Oct.-1 Nov. 2007. Federal Aviation Administration, Washington DC.

airEXODUS evacuation software

algorithm

Fenech, Keith Alexander (1987) Analysing aspects of the performance of an ironblast furnace. PhD thesis, Thames Polytechnic.

Lai, Choi-Hong (2008) Numerical solutions of certain nonlinear models in European options on a distributed computing environment. In: Nonlinear Models in Mathematical Finance: New Research Trends in Option Pricing. Nova Science Publishers, Inc., Hauppauge, NY, USA, pp. 305-320. ISBN 978-1-60456-931-5

Milner, J.J. and Grandison, Angus (2008) A fast, streaming SIMD extensions 2, logistic squashing function. Neural Computation, 20 (12). pp. 2967-2972. ISSN 0899-7667 (Print), 1530-888X (Online) (doi:10.1162/neco.2008.10-06-366)

algorithms

Chan, Andrew Koon Sang (1994) Free surface flow and application to the filling and solidification of liquid metals into vessels of arbitrary shape. PhD thesis, University of Greenwich.

Ierotheou, Constantinos Savvas (1990) The simulation of fluid flow processes using vector processors. PhD thesis, Thames Polytechnic.

McBride, Diane (2003) Vertex-based discretisation methods for thermo-fluid flow in a finite volume-unstructured mesh context. PhD thesis, University of Greenwich.

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

aluminium

Lu, Hua, Loh, Wei-Sun, Bailey, Christopher and Johnson, C. Mark (2008) Computer simulation of aluminium wirebonds with globtop in power electronics modules. In: 3rd International Microsystems, Packaging, Assembly & Circuits Technology Conference, 2008. IMPACT 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-351. ISBN 978-1-4244-3623-1 (doi:10.1109/IMPACT.2008.4783883)

aluminium electrolysis

Pericleous, Koulis A. and Bojarevics, Valdis (2007) Pseudo-spectral solutions for fluid flow and heat transfer in electro-metallurgical applications. Progress in Compultational Fluid Dynamics, 7 (2-4). pp. 118-127. ISSN 1468-4349 (doi:10.1504/PCFD.2007.013004)

aluminium electrolysis cells

Bojarevics, Valdis and Pericleous, Koulis A. (2008) Shallow water model for aluminium electrolysis cells with variable top and bottom. In: Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 403-408. ISBN 978-0-87339-710-0

aluminium production

Bojarevics, Valdis and Pericleous, Koulis A. (2009) Solutions for the metal-bath interface in aluminium electrolysis cells. In: Light Metals 2009. TMS (The Minerals Metals and Materials Society), Warrendale, PA, pp. 569-574. ISBN 9780873397315

aluminium wirebonds

Lu, Hua, Loh, Wei-Sun, Bailey, Christopher and Johnson, C. Mark (2008) Computer modelling analysis of the globtop's effects on aluminium wirebond reliability. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1369-1373. ISBN 978-1-4244-2814-4 (Print) 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684555)

AMLCD

Lee, Yek, Bailey, Christopher, Lu, Hua, Riches, Steve, Bartholomew, Martin and Tebbit, Nigel (2006) Analysis of the thermo mechanical effects on packaging process of performance enhanced AMLCD's and the optical performance of the display. In: Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE , pp. 1214-1217. ISBN 9781424405527 (doi:10.1109/ESTC.2006.280164)

analysis tools

Bailey, Christopher, Lu, Hua, Stoyanov, Stoyan, Tilford, Tim, Xue, Xiangdong, Alam, M.O., Yin, Chunyan and Hughes, Michael (2008) Modelling technologies and applications. In: Nanopackaging: Nanotechnologies and Electronics Packaging. Springer Science+Business Media, LLC, New York, USA, pp. 15-38. ISBN 978-0-387-47325-3 (Print) 978-0-387-47326-0 (Online) (doi:10.1007/978-0-387-47325-3_2)

analytical models

Easter, S., Bojarevics, Valdis and Pericleous, Koulis A. (2009) Determining surface tension using DC magnetic levitation. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

and alloys

Wu, B.Y., Chan, Y.C., Zhong, H.W., Alam, M.O. and Lai, J.K.L. (2007) Study of the thermal stress in a Pb-free half-bump solder joint under current stressing. Applied Physics Letters, 90 (23). ISSN 000-6951 (doi:10.1063/1.2747183)

and failure

anisotropic conductive film

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

anisotropic conductive film (ACF)

Rizvi, M.J., Bailey, Christopher, Chan, Y.C. and Lu, Hua (2006) Effects of thermal cycling profiles on the performance of chip-on-flex assembly using anisotropic conductive films. In: Thermal and Thermomechanical Phenomena in Electronics Systems, 2006. ITHERM '06. The Tenth Intersociety Conference on. IEEE, pp. 855-860. ISBN 0780395247 (doi:10.1109/ITHERM.2006.1645436)

applied mathematics

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

Fenech, Keith Alexander (1987) Analysing aspects of the performance of an ironblast furnace. PhD thesis, Thames Polytechnic.

Johnson, Stephen Philip (1992) Mapping numerical software onto distributed memory parallel systems. PhD thesis, Thames Polytechnic.

Lawrence, Peter James (1994) Mesh generation by domain bisection. PhD thesis, University of Greenwich.

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

McManus, Kevin (1996) A strategy for mapping unstructured mesh computational mechanics programs onto distributed memory parallel architectures. PhD thesis, University of Greenwich.

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

Wade, Kevin Christopher (1987) SARK: a type-insensitive Runge-Kutta code. PhD thesis, Thames Polytechnic.

articulated trains

Roberts, John, Robinson, Mark and Xue, Xiangdong (2008) Comparison of crash dynamics of articulated and non-articulated trains. In: Passive Safety of Rail Vehicles 2008: Innovation in Passive Safety and Interior Design - 7th International Symposium Passive Safety of Rail Vehicles. Bahntechnik Aktuell (17 ). IFV Bahntechnik e.V., Berlin, Germany. ISBN 978-3-940727-08-4

Asian American Options

Parrott, Kevin and Rout, Sweta (2006) Semi-Lagrange time integration for PDE models of asian options. In: Progress in Industrial Mathematics at ECMI 2004. Mathematics in Industry, 8 . Springer Berlin / Heidelberg, Berlin, pp. 432-436. ISBN 9783540280729 (doi:10.1007/3-540-28073-1)

assembly analysis

Galea, Edwin R., Deere, Steven, Sharp, Gary, Filippidis, Lazaros, Lawrence, Peter and Gwynne, Steve (2007) Recommendations on the nature of the passenger response time distribution to be used in the MSC 1033 assembly time analysis based on data derived from sea trials. International Journal of Maritime Engineering, 149 (A1). pp. 15-29. ISSN 1479-8751

assembly process technology

Tilford, Tim, Bailey, Christopher, Parrott, Kevin, Rizvi, M.J., Yin, Chunyan, Sinclair, Keith I. and Desmulliez, Marc P.Y. (2008) Impact of assembly process technologies on electronic packaging materials. In: International Conference on Electronic Packaging Technology & High Density Packaging, 2008. ICEPT-HDP 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-6. ISBN 978-1-4244-2739-0 (online) 978-1-4244-2740-6 (print) (doi:10.1109/ICEPT.2008.4607039)

assembly trials

atmospheric pollution

Pericleous, Koulis A., Plainiotis, S. and Fisher, Bernard (2006) Airborne transport of Saharan dust to the Mediterranean and to the Atlantic. In: Proceedings of the second IASTED International Conference on Environmental Modelling and Simulation, November 29-December 1, 2006, St. Thomas, US Virgin Islands. ACTA Press, Anaheim ; Calgary ; Zürich, pp. 54-59. ISBN Print: 978-0-88986-617-1 CD: 0 88986 619 8

ATTMA "Aerosol Transport

Plainiotis, S., Pericleous, K.A., Fisher, B.E.A. and Shier, L. (2005) Forward and inverse transport of particulate matter and gaseous pollutants affecting the region bordering the English Channel. In: International Conference on Modelling and Simulation, 2005. ACTA Press, Calgary, AB, Canada, pp. 164-169. ISBN 0-88986-496-9 (print) : 0-88986-498-5 (CD) ISSN 1922-8058 (CD), 1925-8003 (print) (doi:http://www.actapress.com/Content_of_Proceeding.aspx?proceedingid=290)

Au/Ni metallization

Zhong, W.H., Chan, Y.C., Wu, B.Y., Alam, M.O. and Guan, J.F. (2007) Multiple reflow study of ball grid array (BGA) solder joints on Au/Ni metallization. Journal of Materials Science, 42 (13). pp. 5239-5247. ISSN 0022-2461 (doi:10.1007/s10853)

aviation accident reports

aviation accidents

Cooney, David P., Dixon, Andrew J., Finney, Kate M., Galea, Edwin R. and Siddiqui, Asim (2008) CAA paper 2006/01: a database to record human experience of evacuation in aviation accidents: the aircraft statistics and knowledge database (AASK). Project Report. Civil Aviation Authority, London, UK.

aviation safety

ball grid array (BGA)

Alam, M.O., Lu, Hua, Bailey, Christopher, Chan, Y.C. and Wu, B.Y. (2007) Shear strength analysis of ball grid array (BGA) solder interfaces. In: 2007 9th Electronics Packaging Technology Conference. Electronics Packaging Technology Conference Proceedings . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 770-773. ISBN 9781424413249 (doi:11.1109/EPTC.2007.4469797)

ball shear test

Bayesian Networks (BN)

Yin, C.Y., Lu, H., Musallam, M., Bailey, C. and Johnson, C. M. (2008) A prognostic assessment method for power electronics modules. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1353-1358. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684552)

binary alloy

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

biofluid behaviour

Xue, Xiangdong, Patel, Mayur, Kersaudy-Kerhoas, Maïwenn, Bailey, Christopher, Desmulliez, Marc P.Y. and Topham, David (2009) Effect of fluid dynamics and device mechanism on biofluid behaviour in microchannel systems: modelling biofluids in a microchannel biochip separator. In: International Conference on Electronic Packaging Technology & High Density Packaging, 2009. ICEPT-HDP '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 179-186. ISBN 978-1-4244-4659-9 (doi:10.1109/ICEPT.2009.5270767)

biomedical engineering

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

block-structured mesh

Djambazov, Georgi S. (2012) Zonal method for simultaneous definition of block-structured geometry and mesh. Journal of Algorithms & Computational Technology, 6 (1). pp. 203-218. ISSN 1748-3018 (Print) (doi:10.1260/1748-3018.6.1.203)

blood plasma separation

blood preparation

Kersaudy-Kerhoas, Maïwenn, Kavanagh, Deirdre, Xue, Xiangdong, Patel, Mayur, Bailey, Christopher, Dhariwal, Resham and Desmulliez, Marc P.Y. (2008) Integrated biomedical device for blood preparation. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 447-452. ISBN 978-1-4244-2814-4 (Print) 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684389)

bond strength

boundary element method

Davies, A.J., Crann, Diane, Kane, S.J. and Lai, Choi-Hong (2007) A hybrid Laplace transform/finite difference boundary element method for diffusion problems. Computer Modelling in Engineering and Sciences, 18 (2). pp. 79-86. ISSN 1526-1492

Brazil

Machado Tavares, Rodrigo, Gwynne, Steve and Galea, Edwin R. (2007) Collection and analysis of pre-evacuation time data collected from evacuation trials conducted in library facilities in Brazil. Journal of Applied Fire Science, 15 (1). pp. 23-40. ISSN 1044-4300 (doi:10.2190/AF.15.1.b)

breakage matrix

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

brittleness

bubbles

Cross, Mark, Croft, Nick, Djambazov, G and Pericleous, Koulis A. (2006) Computational modelling of bubbles, droplets and particles in metals reduction and refining. Applied Mathematical Modelling, 3. pp. 1445-1458. ISSN 0307-904X (doi:/10.1016/j.apm.2006.03.007)

buildingEXODUS

Filippidis, Lazaros, Galea, Edwin R., Blackshields, Darren and Lawrence, Peter (2009) Experimental study of the effectiveness of emergency signage. In: Human Behaviour in Fire 2009 - Conference Proceedings. Interscience Communications Ltd., Greenwich, London, UK, pp. 289-300. ISBN 978-0-9556548-3-1

Kinsey, Michael J., Galea, Edwin R. and Lawrence, Peter (2009) Investigating the use of elevators for high-rise building evacuation through computer simulation. In: 4th International Symposium on Human Behaviour in Fire 2009: Conference Proceedings. Interscience Communications Ltd., London, UK, pp. 85-96. ISBN 978-0-9556548-3-1

buildingEXODUS escalator model

Kinsey, Michael J., Galea, Edwin R. and Lawrence, Peter (2009) Extended model of pedestrian escalator behaviour based on data collected within a Chinese underground station. In: 4th International Symposium on Human Behaviour in Fire 2009: Conference Proceedings. Interscience Communications Ltd, London, UK, pp. 173-182. ISBN 978-0-9556548-3-1

buildingEXODUS evacuation model

Machado Tavares, Rodrigo and Galea, Edwin R. (2010) Numerical optimisation techniques applied to evacuation analysis. In: Pedestrian and Evacuation Dynamics 2008. Springer-Verlag, Berlin / Heidelberg, Germany, pp. 555-561. ISBN 978-3-642-04503-5 (Print), 978-3-642-04504-2 (Online) (doi:10.1007/978-3-642-04504-2_49)

buildingEXODUS software

Grandison, Angus, Muthu, Yasmina, Lawrence, Peter and Galea, Edwin R. (2007) Simulating the evacuation of very large populations in large domains using a parallel implementation of the buildingEXODUS evacuation model. In: Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications, Greenwich, pp. 259-270. ISBN 9780954121686

bumps

business data processing

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

C++

Wang, Meiqing and Lai, Choi-Hong (2008) Concise introduction to image processing using C++. Numerical Analysis and Scientific Computing Series . Chapman & Hall/CRC Press, Boca Raton, Florida , USA. ISBN 978-1-58488-897-0

calculation methods

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

car

Lai, Liang, Djambazov, G., Lai, Choi-Hong, Pericleous, Koulis A. and Magoules, Frederic (2006) Experience of using a CFD code for estimating the noise generated by gusts along the sun-roof of a car. In: CD-ROM Proceedings of the Thirteenth International Congress on Sound and Vibration, ICSV13, July 2-6, 2006, Vienna, Austria.

carbon monoxide

Wang, Zhaozhi, Jia, Fuchen and Galea, Edwin R. (2007) Predicting toxic gas concentrations resulting from enclosure fires using local equivalence ratio concept linked to fire field models. Fire and Materials, 31 (1). pp. 27-51. ISSN 0308-0501 (doi:10.1002/fam.924)

case based reasoning

Taylor, Stephen, Knight, Brian, Petridis, Miltos, Ewer, John and Galea, Edwin (2001) A case based reasoning system capturing fire modelling expertise. Computing and Informatics, 20 (3). pp. 269-288. ISSN 1335-9150

case study

Xue, Xiangdong, Lu, Hua and Bailey, Christopher (2007) A modelling approach for coupling numerical analytical techniques applied in microsystems. In: ICEPT: 2007 8th International Conference On Electronics Packaging Technology, Proceedings. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 204-211. ISBN 9781424413911 (doi:10.1109/ICEPT.2007.4441412)

casting

Chan, Andrew Koon Sang (1994) Free surface flow and application to the filling and solidification of liquid metals into vessels of arbitrary shape. PhD thesis, University of Greenwich.

Cross, Mark, Croft, Nick, Slone, Avril, Williams, Alison, Christakis, Nicholas, Patel, Mayur, Bailey, Christopher and Pericleous, Koulis A. (2007) Computational modelling of multi-physics and multi-scale processes in parallel. International Journal for Computational Methods and Engineering Science and Mechanics, 8 (2). pp. 63-74. ISSN 1550-2287 (doi:10.1080/15502280601149510)

Pericleous, Koulis A., Djambazov, Georgi, Lebon, B., Croft, T.-N., Domgin, J.-F. and Gardin, P. (2008) Time-dependent modelling and experimental validation of the metal/flux interface in a continuous casting mould. Revue de Métallurgie - Cahiers d'informations techniques, 1. pp. 33-43. ISSN 0035-1563 (Print) 1156-3141 (Electronic) (doi:10.1051/metal:2008011)

cell-centred

Edussuriya, S.S., Williams, A.J. and Bailey, C. (2004) A cell-centred finite volume method for modelling viscoelastic flow. Journal of Non-Newtonian Fluid Mechanics, 117 (1). pp. 47-61. ISSN 0377-0257 (doi:10.1016/j.jnnfm.2003.12.001)

Centre for Numerical Modelling

Pericleous, Kyriacos (2011) Computational science and the future. Public Service Review: UK Science and Technology, 4. pp. 26-27. ISSN 2046-5696 (Online) 2045-3884 (Print)

certification requirements

CFD

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

Dhinsa, Kulvir Kaur (2006) Development and application of low Reynolds number turbulence models for air-cooled electronics. PhD thesis, University of Greenwich.

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

Galea, Edwin R., Wang, Zhaozhi, Veeraswamy, Anand, Jia, Fuchen, Lawrence, Peter J. and Ewer, John (2008) Coupled fire/evacuation analysis of the Station Nightclub fire. In: Fire Safety Science - Proceedings of the Ninth International Symposium. International Association for Fire Safety Science, Greenwich, London, UK, pp. 465-476. ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.9-465)

Grandison, Angus, Galea, Edwin R., Patel, Mayur and Ewer, John (2007) Parallel CFD fire modelling on office PCs with dynamic load balancing. International Journal for Numerical Methods in Fluids, 55 (1). pp. 29-39. ISSN 0271-2091 (doi:10.1002/fld.1278)

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

Hughes, Michael, Strussevitch, Nadia, Bailey, Christopher, McManus, Kevin, Kaufmann, Jens, Flynn, David and Desmulliez, Marc P.Y. (2010) Numerical algorithms for modelling electrodeposition: tracking the deposition front under forced convection from megasonic agitation. International Journal for Numerical Methods in Fluids, 64 (3). pp. 237-268. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.2140)

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

McManus, Kevin (1996) A strategy for mapping unstructured mesh computational mechanics programs onto distributed memory parallel architectures. PhD thesis, University of Greenwich.

Patel, Mayur K. (1986) On the false-diffusion problem in the numerical modelling of convection-diffusion processes. PhD thesis, Thames Polytechnic.

Wang, Zhaozhi, Jia, Fuchen, Galea, Edwin R., Patel, Mayur and Ewer, John (2007) Predicting HCl concentrations in fire enclosures using an HCl decay model coupled to a CFD-based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

CFD analysis

Kiani, Nageena, Patel, Mayur and Lai, Choi-Hong (2007) CFD analysis of one-dimensional infiltration in vadose zone. Journal of Algorithms & Computational Technology, 1 (4). pp. 477-493. ISSN 1748-3018 (doi:10.1260/174830107783133897)

CFD fire simulation

Jia, F., Patel, M.K., Galea, E.R., Grandison, A. and Ewer, J. (2006) CFD fire simulation of the Swissair flight 111 in-flight fire - part II: fire spread analysis. The Aeronautical Journal of the Royal Aeronautical Society, 110 (1107):3069. pp. 303-314. ISSN 0001-9240

cfd modelling

Frost, Nageena Kiani (2006) CFD modelling of fluid flow and contaminant transport in hydrogeological systems. PhD thesis, University of Greenwich.

CFD simulation

Turitto, Michele, Ratchev, Svetan, Xue, Xiangdong, Hughes, Michael and Bailey, Christopher (2007) Pneumatic contactless microfeeder design refinement through CFD simulation. In: 4M 2007 Proceedings of the 3rd International Conference on Multi-Material Micro Manufacture. Whittles Publishing, Dunbeath, Scotland, pp. 65-68. ISBN 9781904445531

chemical engineering

Kostamis, Photis (1987) Computer modelling and analysis of particulate laden gas flows. PhD thesis, Thames Polytechnic.

chemistry

Kostamis, Photis (1987) Computer modelling and analysis of particulate laden gas flows. PhD thesis, Thames Polytechnic.

chip mountdown solder

Lu, Hua, Tilford, Tim, Xue, Xiangdong and Bailey, Christopher (2007) Thermal-mechanical modelling of power electronic module packaging. In: EUROSIME 2007: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, Proceedings. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 317-322. ISBN 9781424411054 (doi:10.1109/ESIME.2007.359960)

chip-on-board (COB) assembly

Tilford, Tim, Pavuluri, S., Bailey, Christopher and Desmulliez, Marc P.Y. (2009) On variable frequency microwave processing of heterogeneous chip-on-board assemblies. In: International Conference on Electronic Packaging Technology & High Density Packaging, 2009. ICEPT-HDP '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 927-931. ISBN 978-1-4244-4659-9 (doi:10.1109/ICEPT.2009.5270558)

chip-on-flex (COF)

circuits

Richardson, Andrew, Bailey, Christopher, Yanou, Jean Marc, Dumas, Norbert, Liu, Dongsheng, Stoyanov, Stoyan and Strusevitch, Nadia (2007) "System in package technology" - design for manufacture challenges. Circuit World, 33 (1). pp. 36-46. ISSN 0305-6120 (doi:10.1108/03056120710723706)

circulation model

Kinsey, Michael J., Galea, Edwin R., Lawrence, Peter J., Blackshields, Darren, Hulse, Lynn, Day, Rachel and Sharp, Gary (2010) Modelling pedestrian escalator behaviour. In: Pedestrian and Evacuation Dynamics 2008. Springer Berlin Heidelberg, Berlin / Heidelberg, Germany, pp. 689-695. ISBN 978-3-642-04503-5 (print), 978-3-642-04503-5 (eISBN) (doi:10.1007/978-3-642-04504-2_66)

Civil Aviation Authority

coded evacuation experiences

Galea, E.R., Shields, J., Canter, D., Boyce, K., Day, R., Hulse, L., Siddiqui, A., Summerfield, L., Marselle, M. and Greenall, P. V. (2007) The UK WTC 9/11 evacuation study: methodologies used in the elicitation and storage of human factors data. In: Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications , Greenwich, UK, pp. 169-181. ISBN 9780954121686

cognition

Parrott, Kevin and Tilford, Tim (2007) Numerical simulation of microwave thawing using a coupled solver approach. PAMM - Proceedings in Applied Mathematics and Mechanics, 7 (1). pp. 1150601-1150602. ISSN 1617-7061 (online) (doi:10.1002/pamm.200700212)

cognitive mapping

Veeraswamy, Anand, Lawrence, Peter and Galea, Edwin (2009) Implementation of cognitive mapping, spatial representation and wayfinding behaviours of people within evacuation modelling tools. In: Human Behaviour in Fire 2009 - Conference Proceedings. Interscience Communications Ltd., Greenwich, London, UK, pp. 501-512. ISBN 978-0-9556548-3-1

cold crucible

Pericleous, Koulis A., Bojarevics, Valdis, Harding, R.A. and Wickins, M. (2003) Experimental and numerical study of the cold crucible melting process. In: Third International Conference on CFD in the Minerals and Process Industries CSIRO, 10-12 Dec 2003, Melbourne, Australia.

Pericleous, Koulis A., Bojarevics, Valdis, Djambazov, G., Harding, R. and Wickins, M. (2006) Experimental and numerical study of the cold crucible melting process. Applied Mathematical Modelling, 30 (11). pp. 1262-1280. ISSN 0307-904X (doi:10.1016/j.apm.2006.03.003)

cold crucible furnaces

Bojarevics, Valdis and Pericleous, Koulis A. (2007) Liquid metal induction heating modelling for cold crucible applications. International Journal of Materials and Product Technology, 29 (1-4). pp. 70-83. ISSN 0268-1900 (doi:10.1504/IJMPT.2007.013131)

cold crucible melting

collection

Galea, Edwin R., Hulse, Lynn, Day, Rachel, Siddiqui, Asim, Sharp, Gary, Boyce, Karen, Summerfield, Louise, Canter, David, Marselle, Melisa and Greenall, Paul V. (2010) The UK WTC9/11 evacuation study: an overview of the methodologies employed and some preliminary analysis. In: Pedestrian and Evacuation Dynamics 2008. Springer Berlin Heidelberg, Berlin / Heidelberg, Germany, pp. 3-24. ISBN 978-3-642-04503-5 (print), 978-3-642-04504-2 (eISBN) (doi:10.1007/978-3-642-04504-2_1)

collocated variables

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

comparative narratives

Conyers, Toby Richard (1999) Automating Abell's theory of comparative narratives. PhD thesis, University of Greenwich.

compartment fires

compiler directives

Ierotheou, Cos, Jin, H., Matthews, G., Johnson, Steve, Hood, R. and Leggett, Peter (2007) Using an interactive software environment for the parallelization of real-world scientific applications. International Journal of Computer Mathematics, 84 (2). pp. 167-175. ISSN 0020-7160 (doi:10.1080/00207160601169942)

composite

Stoyanov, S., Mason, P. and Bailey, C. (2006) Computational methodology for analysis of historic composite structures. In: Proceedings of the 5th International Conference on Engineering Computational Technology. Civil-Comp Press, Stirlingshire, UK. ISBN 1905088116 ISSN 1759-3433 (doi:10.4203/ccp.84.132)

composite materials

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

computational

computational fluid dynamics

Burton, D.J., Grandison, Angus, Patel, Mayur, Galea, Edwin R. and Ewer, John (2007) Introducing a hybrid field/zone modelling approach for fire simulation. In: Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications, Greenwich, pp. 1491-1497. ISBN 9780954121693

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

Chow, P., Cross, Mark and Pericleous, Koulis A. (1996) A natural extension of the conventional finite volume method into polygonal unstructured meshes for CFD application. Applied Mathematical Modelling, 20 (2). pp. 170-183. ISSN 0307-904X (doi:10.1016/0307-904X(95)00156-E)

Cross, Mark, Croft, Nick, McBride, Diane, Slone, Avril, Williams, Alison, Bailey, Christopher and Pericleous, Koulis A. (2006) Computational fluid dynamics: advancements in technology for modeling iron and steelmaking processes. Aist Transactions - Iron and Steel Technology, 3 (7). pp. 155-163.

Dhinsa, Kulvir Kaur (2006) Development and application of low Reynolds number turbulence models for air-cooled electronics. PhD thesis, University of Greenwich.

Frost, Nageena Kiani (2006) CFD modelling of fluid flow and contaminant transport in hydrogeological systems. PhD thesis, University of Greenwich.

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

McManus, Kevin (1996) A strategy for mapping unstructured mesh computational mechanics programs onto distributed memory parallel architectures. PhD thesis, University of Greenwich.

Wang, Zhaozhi, Galea, Edwin R. and Jia, Fuchen (2007) A computational study of the characteristics of aircraft post-crash fires. In: Proceedings of the 5th Triennial International Fire and Cabin Safety Research Conference, Atlantic City, 29 Oct.-1 Nov. 2007. Federal Aviation Administration, Washington DC.

Xue, Xiangdong, Patel, Mayur K., Bailey, Chris, Kersaudy-Kerhoas, Maïwenn and Desmulliez, Marc P.Y. (2008) Challenges in modelling biofluids in microchannels. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 287-292. ISBN 978-1-4244-2814-4 (Print) 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684363)

Yao, Jun, Yao, Yufeng, Mason, Peter J. and Patel, Mayur (2009) Numerical simulation of heat transfer in rectangular microchannel. Advances in Applied Mathematics and Mechanics, 1 (2). pp. 231-241. ISSN 2070-0733 (print) 2075-1354 (electronic)

computational fluid dynamics (CFD)

Dhinsa, K., Bailey, C. and Pericleous, K. (2005) Investigation into the performance of turbulence models for fluid flow and heat transfer phenomena in electronic applications. Components and Packaging Technologies, IEEE Transactions on , 28 (4). pp. 686-699. ISSN 1521-3331 (doi:10.1109/TCAPT.2005.859758)

Kay, Robert W., Stoyanov, Stoyan, Glinski, Greg P., Bailey, Christopher and Desmulliez, Marc P.Y. (2007) Ultra-fine pitch stencil printing for a low cost and low temperature flip-chip assembly process. IEEE Transactions on Components and Packaging Technologies, 30 (1). pp. 129-136. ISSN 1521-3331 (doi:10.1109/TCAPT.2007.892085)

computational mechanics

Cross, Mark (1996) Modelling of industrial multi-physics processes—a key role for computational mechanics. IMA Journal of Mathematics for Business and Industry, 7 (1). pp. 3-21. ISSN 0953-0061 (doi:10.1093/imaman/7.1.3-a)

computational modeling

Djambazov, Georgi and Pericleous, Koulis A. (2009) Choosing the appropriate level of coupling in multi-physics modeling of metallurgical processes. AIP Conference Proceedings: Applications of Mathematics in Engineering and Economics (AMEE '09): Proceedings of the 35th International Conference, 1184 (1 ). pp. 24-31. ISSN 0094-243X (print and online) 1551-7616 (online only) (doi:10.1063/1.3271622)

computational modelling

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

computational solid mechanics

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

computational speed

computer egress simulation

computer model

computer modelling

Conyers, Toby Richard (1999) Automating Abell's theory of comparative narratives. PhD thesis, University of Greenwich.

Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/BF02735009)

Kostamis, Photis (1987) Computer modelling and analysis of particulate laden gas flows. PhD thesis, Thames Polytechnic.

Ridout, Stephen, Dusek, Milos, Bailey, Christopher and Hunt, Chris (2006) Assessing the performance of crack detection tests for solder joints. Microelectronics Reliability, 46 (12). pp. 2122-2130. ISSN 0026-2714 (doi:10.1016/j.microrel.2006.05.001)

Rizvi, M.J., Bailey, Christopher, Chan, Y.C. and Lu, Hua (2006) Comparative wetting behavior of Sn-0.7Cu and Sn-0.7Cu-0.3Ni solders on Cu and Ni substrates. In: 1st Electronics Systemintegration Technology Conference. Dresden, Saxony, Germany. 2006 proceedings. IEEE, Piscataway, NJ, USA, pp. 145-151. ISBN 142440553X (doi:10.1109/ITHERM.2006.1645436)

Rizvi, M.J., Yin, Chunyan and Bailey, Christopher (2006) Modeling the effect of lead-free soldering on flexible substrates. In: Electronic Materials and Packaging, 2006, EMAP 2006, International Conference on 11-14 Dec. 2006. IEEE, Piscataway, NJ, USA, pp. 1038-1042. ISBN 1424408334; 1424408342 (doi:10.1109/EMAP.2006.4430695)

Rizvi, Mohammed Jahir (2007) Experimental and modelling studies of electronic packaging interconnections formed with lead-free materials. PhD thesis, University of Greenwich.

Stoyanov, Stoyan and Bailey, Christopher (2006) Optimisation modelling for design of advanced interconnects. In: 1st Electronics Systemintegration Technology Conference. Dresden, Saxony, Germany. 2006 proceedings. IEEE, Piscataway, NJ, USA, pp. 1108-1117. ISBN 1424405521 (doi:10.1109/ESTC.2006.280148)

computer simulation

Lu, Hua, Ridout, Stephen, Bailey, Christopher, Loh, Wei-Sun, Pearl, Agyakwa and Johnson, C. Mark (2008) Computer simulation of crack propagation in power electronics module solder joints. In: International Conference on Electronic Packaging Technology & High Density Packaging, 2008. ICEPT-HDP 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-6. ISBN 978-1-4244-2740-6 (print) 978-1-4244-2739-0 (online) (doi:10.1109/ICEPT.2008.4606983)

computer software

Johnson, Stephen Philip (1992) Mapping numerical software onto distributed memory parallel systems. PhD thesis, Thames Polytechnic.

Jones, Beryl Wyn (1994) Mapping unstructured mesh codes onto local memory parallel architectures. PhD thesis, University of Greenwich.

Lawrence, Peter James (1994) Mesh generation by domain bisection. PhD thesis, University of Greenwich.

McManus, Kevin (1996) A strategy for mapping unstructured mesh computational mechanics programs onto distributed memory parallel architectures. PhD thesis, University of Greenwich.

computer-aided design

Lawrence, Peter James (1994) Mesh generation by domain bisection. PhD thesis, University of Greenwich.

conductive particle

constituitive modeling

Ridout, Stephen, Bailey, Christopher, Dusek, Milos and Hunt, C (2007) Constitutive modeling of kinematic-hardening and damage in solder joints. In: Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE , pp. 927-933. ISBN 1-4244-0552-1 (doi:10.1109/ESTC.2006.280122)

constitutive law

Ridout, Stephen and Bailey, Christopher (2007) Review of methods to predict solder joint reliability under thermo-mechanical cycling. Fatigue & Fracture of Engineering Materials & Structures, 30 (5). pp. 400-412. ISSN 8756-758X (doi:10.1111/j.1460-2695.2006.01065.x)

contact angle

Rizvi, M.J., Bailey, Christopher, Chan, Y.C. and Lu, Hua (2007) Effect of adding 0.3 wt% Ni into the Sn–0.7 wt%Cu solder: part I: wetting behavior on Cu and Ni substrates. Journal of Alloys and Compounds, 438 (1-2). pp. 116-121. ISSN 0925-8388 (doi:10.1016/j.jallcom.2006.08.048)

contact resistance

contactless

contamination

Frost, Nageena Kiani (2006) CFD modelling of fluid flow and contaminant transport in hydrogeological systems. PhD thesis, University of Greenwich.

continuous casting

Kountouriotis, Z., Pericleous, K., Djambazov, G., Domgin, J.F. and Gardin, P. (2011) Experimental and numerical investigation of the transient meniscus behaviour in a continuous caster. In: 7th European Conference on Continuous Casting (ECCC 2011) , 27 June - 1st July 2011, Dusseldorf, Germany. (Unpublished)

Continuous Wavelet Transform (CWT)

Kao, David, Graham, Deryn and Pericleous, Koulis A. (2007) An analysis of the changes to the mechanical and acoustical properties of paper caused by the damage mechanisms present in the fibre structure. In: 14th International Congress on Sound and Vibration (ICSV14). University of New South Wales. ISBN 97807334 25165

continuum model

Christakis, N, Chapelle, Pierre and Patel, Mayur (2006) Analysis and modeling of heaping behavior of granular mixtures within a computational mechanics framework. Advanced Powder Technology, 17 (4). pp. 383-398. ISSN 0921-8831 (doi:10.1163/156855206777866173)

convection oven

Tilford, Tim, Sinclair, Keith I., Goussetis, George, Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2008) Comparison of encapsulant curing with convention and microwave systems. In: 33rd IEEE/CPMT International Electronic Manufacturing Technology Symposium (IEMT), 2008. IEEE, Piscataway, NJ, USA. ISBN 9781424433926 (print) 9781424433933 (electronic) (doi:10.1109/IEMT.2008.5507869)

conveyor systems

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

cooling efficiency

Rizvi, M.J., Skuriat, R., Tilford, Tim, Bailey, Christopher, Johnson, C. Mark and Lu, Hua (2009) Modelling of jet-impingement cooling for power electronics. In: 10th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, 2009. EuroSimE 2009. Institute of Electrical and Electronics Engineers, Inc. , Piscataway, NJ, USA. ISBN 978-1-4244-4160-0 (doi:10.1109/ESIME.2009.4938428)

coordinate transformation

copper

Rizvi, M.J., Lu, Hua and Bailey, Christopher (2009) Modeling the diffusion of solid copper into liquid solder alloys. Thin Solid Films, 517 (5). pp. 1686-1689. ISSN 0040-6090 (doi:10.1016/j.tsf.2008.09.105)

copper track designs

Rizvi, M.J., Yin, Chunyan, Bailey, Christopher and Lu, Hua (2007) Modelling the reliability of components on flexible substrates. In: IPACK 2007: proceedings of the ASME Interpack Conference 2007. American Society of Mechanical Engineers, New York, pp. 375-380. ISBN 9780791842775 (doi:10.1115/IPACK2007-33820)

corrosion fatigue

coupled electromagnetic and heat transfer computations

Tilford, Tim, Baginski, E., Kelder, J., Pericleous, Koulis A. and Parrott, Kevin (2006) Microwave modeling and validation in food applications. Annual microwave heating symposium (40th). pp. 208-212. ISSN 1070-0129

coupled mass/spring system

coupled mechanical-acoustic system

Kao, D, Pericleous, Koulis A., Graham, Deryn and Knight, Brian (2006) Use of a coupled mechanical-acoustic computational model to identify failure mechanisms in paper production. In: Proceedings of the Thirteenth International Congress on Sound and Vibration, ICSV13 , 2-6 Jul 2006, Vienna, Austria.

coupled simulation

Tilford, Tim, Sinclair, Keith I., Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2007) Coupled FDTD-FVM simulation of microwave heating of polymer materials for micro-systems packaging applications. Annual microwave heating symposium (41st). pp. 7-11. ISSN 1070-0129

coupled solution

Tilford, T., Parrott, A.K., Bailey, C. and Pericleous, K.A. (2008) Multiphysics simulation of microwave processing using a multidomain coupled solver approach. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008). International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain. ISBN 978-84-96736-55-9

coupling

crack propagation

cracking

crash dynamics

crash simulation

Xue, Xiangdong, Schmid, F. and Smith, R. (2007) Analysis of the structural characteristics of an intermediate rail vehicle and their effect on vehicle crash performance. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit , 221 (F3). pp. 339-352. ISSN 0954-4097 (doi:10.1243/09544097JRRT77)

crashworthiness

Xue, X, Smith, R and Schmid, F (2005) Analysis of crush behaviours of a rail cab car and structural modifications for improved crashworthiness. International Journal of Crashworthiness, 10 (2). pp. 125-136. ISSN 1358-8265 (Print), 1754-2111 (Online) (doi:10.1533/ijcr.2005.0332)

creep curves

crowd formations

crucibles

crystal growth

Kao, Andrew, Djambazov, Georgi, Pericleous, Koulis A. and Voller, V. (2008) Effects of magnetic fields on crystal growth. In: Proceedings of the 7th International PAMIR Conference: Fundamental and Applied MHD and COST P17 Annual Workshop 2008. Institute of Physics, University of Latvia, Salaspils, Latvia, pp. 621-625.

Kao, Andrew, Djambazov, Georgi, Pericleous, Koulis A. and Voller, V. (2009) Thermoelectric MHD in dendritic solidification. Magnetohydrodynamics, 45 (3). pp. 305-315. ISSN 0024-998X

CSM

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

Cu trace

cure

Morris, James E., Tilford, Tim, Ferenets, M. and Bailey, Christopher (2009) A critical analysis of polymer cure modeling for microelectronics applications. In: IMAPS Nordic Conference 2009, 13-15 September 2009, Tønsberg, Norway.

cure data

Tilford, T., Morris, J.E., Ferenets, M., Rajaguru, P.R., Pavuluri, S.K., Desmulliez, M.P.Y. and Bailey, C. (2010) On model fitting methods for modeling polymer cure kinetics in microelectronics assembly applications. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642820)

cure kinetics

Tilford, T., Ferenets, M., Morris, J., Rajaguru, P.R., Pavuluri, S., Desmulliez, M.P.Y. and Bailey, C. (2010) Evaluation of polymer cure models in microelectronics packaging applications. In: International Conference on Electronics Packaging (ICEP2010), 12-14 May 2010, Sapporo, Hokkaido, Japan. (Unpublished)

cure process

Sinclair, Keith I., Tilford, Tim, Goussetis, George, Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2008) Advanced microwave oven for rapid curing of encapsulant. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 551-556. ISBN 978-1-4244-2814-4 (print) 978-1-4244-2813-7 (online) (doi:10.1109/ESTC.2008.4684409)

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

curing

Pavuluri, S.K., Ferenets, M., Goussetis, G., Desmulliez, M.P.Y., Tilford, T., Adamietz, R., Muller, G., Eicher, F. and Bailey, C. (2010) Experimental investigation of open-ended microwave oven assisted encapsulation process. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, NJ, USA, pp. 1-6. ISBN 978-1-4244-8553-6 (print), 978-1-4244-8554-3 (online) (doi:10.1109/ESTC.2010.5643015)

Sinclair, K.I., Tilford, T., Desmulliez, M.Y.P., Goussetis, G., Bailey, C., Parrott, K. and Sangster, A.J. (2008) Open ended microwave oven for packaging. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, 2008 (MEMS/MOEMS 2008). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 16-20. ISBN 978-2-3550-0006-5 (doi:10.1109/DTIP.2008.4752943)

curing encapsulant materials

Adamietz, R., Tilford, T., Ferenets, M., Desmulliez, M.P.Y., Muller, G., Othman, N and Eicher, F. (2010) Modular microwave-based system for packaging applications. In: International Conference on Electronics Packaging (ICEP2010), 12-14 May 2010, Sapporo, Hokkaido, Japan. (Unpublished)

curing process

Tilford, Tim, Ferenets, M., Morris, James E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, Marc P.Y. and Bailey, Christopher (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

Tilford, T., Ferenets, M., Adamietz, R., Pavuluri, S.K., Morris, J.E., Desmulliez, M.P.Y. and Bailey, C. (2010) Numerical analysis of microwave underfill cure in ball-grid packages. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642822)

curing processes

Tilford, Tim, Sinclair, Keith I., Bailey, Christopher, Pavuluri, S. and Desmulliez, Marc P.Y. (2009) On the application of variable frequency microwave technology for processing of individual surface mount components. In: 2009 International Conference on Electronics Packaging.

current crowding

Alam, M.O., Bailey, Christopher, Wu, B.Y., Yang, Dan and Chan, Y.C. (2007) High current density induced damage mechanisms in electronic solder joints: a state-of-the-art review. In: HDP'07: Proceedings of the 2007 International Symposium on High Density Packaging and Microsystem Integration. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 93-99. ISBN 9781424412525 (doi:10.1109/HDP.2007.4283569)

current stressing

Cutty Sark

Stoyanov, Stoyan, Mason, P. and Bailey, Christopher (2006) Finite element modelling of an historic ship structure - the Cutty Sark. In: Proceedings of a joint conference of the Association for Computational Mechanics in Engineering (UK) and the Irish Society for Scientific and Engineeering Computation. 19th-20th April 2006, Queen's University Belfast. ACME/ISSEC, pp. 35-38.

cyclic thermal-mechanical loading

Lu, Hua, Tilford, Tim, Bailey, Christopher and Newcombe, David (2007) Lifetime prediction for power electronics module substrate mount-down solder interconnect. In: HDP'07: Proceedings Of The 2007 International Symposium On High Density Packaging And Microsystem Integration. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 40-45. ISBN 9781424412525 (doi:10.1109/HDP.2007.4283558)

damage mechanisms

data analysis

Planitz, M. (1985) Existence and uniqueness of best approximants, with numerical applications. PhD thesis, Thames Polytechnic.

database

DC-DC

Flynn, David, Lu, Hua, Bailey, Christopher and Desmulliez, Marc P.Y. (2006) Assessment of microInductors for DC-DC converters. In: Proceedings of 2006 International Conference on Electronic Materials and Packaging (EMAP 2006). IEEE. ISBN 978-1-4244-0834-4

Lu, Hua, Flynn, David, Bailey, Christopher and Desmulliez, M.Y. (2006) An analysis of a microfabricated solenoid inductor. In: Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 556-561. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280058)

DC-DC power converter

Flynn, David, Lu, Hua, Bailey, Chris and Desmulliez, Marc P.Y. (2008) Design, modeling and characterization of a microinductor for future DC-DC power converters. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 577-582. ISBN 978-1-4244-2814-4 (print), 978-1-4244-2813-7 (online) (doi:10.1109/ESTC.2008.4684414)

decision making

decision support system

Tang, Y.K., Stoyanov, Stoyan, Bailey, Christopher and Lu, Hua (2006) Decision support systems for eco-friendly electronic products. In: Electronic Materials and Packaging, 2006. EMAP 2006. International Conference on. IEEE, Piscataway, N.J., pp. 77-84. ISBN 1424408342; 9781424408344 (doi:10.1109/EMAP.2006.4430580)

defect correction

deference behavior

Galea, E.R., Sharp, G. and Lawrence, P.J. (2008) Investigating the representation of merging behavior at the floor-stair interface in computer simulations of multi-floor building evacuations. Journal of Fire Protection Engineering, 18 (4). pp. 291-316. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/1042391508095092)

deformation

Stoyanov, Stoyan, Tilford, Tim, Amalou, Farid, Cargill, Scott, Bailey, Christopher and Desmulliez, Marc P.Y. (2011) Modelling and optimisation study on the fabrication of nano-structures using imprint forming process. Engineering Computations, 28 (1). pp. 93-111. ISSN 0264-4401 (doi:10.1108/02644401111097046)

degradation tester

dendritic growth

Kao, Andrew, Pericleous, Koulis A. and Voller, V. (2008) Effects of magnetic fields on crystal growth. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain. ISBN 978-84-96736-55-9

Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)

dendritic-growth

Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)

denoise

Lü, Lan, Wang, Meiqing and Lai, Choi-Hong (2008) Image denoise by fourth-order PDE based on the changes of laplacian. Journal of Algorithms & Computational Technology, 2 (1). pp. 99-110. ISSN 1748-3018 (doi:10.1260/174830108784300295)

density

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

dental composites

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

dental materials

Sakaguchi, Ronald L. (1988) A biophysical analysis of the occlusal wear of dental materials. PhD thesis, Thames Polytechnic.

dental wear

Sakaguchi, Ronald L. (1988) A biophysical analysis of the occlusal wear of dental materials. PhD thesis, Thames Polytechnic.

deposition

design

Bailey, Christopher (2006) Design and modeling challenges for high density packaging. In: 2006 Conference on High Density Microsystem Design and Packaging and Component Failure Analysis. IEEE, Piscataway, NJ, USA, pp. 324-328. ISBN 1424404886 (doi:10.1109/HDP.2006.1707617)

design for manufacture

Bailey, Chris, Lu, Hua, Yin, Chunyan and Tilford, Timothy (2008) Integrated reliability and prognostics prediction methodology for power electronic modules. In: IET Seminar on Aircraft Health Management for New Operational and Enterprise Solutions. IET Digest, 2008/12390 . The Institution of Engineering and Technology, Stevenage, UK, pp. 1-39. ISBN 978-0-86341-936-2 ISSN 0537-9989 (doi:10.1049/ic:20080638)

Design for Reliability modelling

Stoyanov, Stoyan, Strusevitch, Nadia, Rizvi, Jahir, Georgel, Vincent, Yannou, Jean-Marc and Bailey, Chris (2008) Design for reliability for wafer level system in package. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 293-298. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684364)

design methodology

Tang, Ying Kit, Stoyanov, S., Bailey, C. and Chan, Y.C. (2008) Uncertainty analysis to minimise risk in designing micro-electronics manufacturing processes. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 941-946. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Electronic) (doi:10.1109/ESTC.2008.4684478)

Design of Experiment (DoE) method

design of experiments

Machado Tavares, R. and Galea, E.R. (2009) Evacuation modelling analysis within the operational research context: a combined approach for improving enclosure designs. Building and Environment, 44 (5). pp. 1005-1016. ISSN 0360-1323 (doi:10.1016/j.buildenv.2008.07.019)

Design of Experiments (DoE)

design optimistation

design-for-reliability

die attach

dielectric material

differential scanning calorimetry (DSC)

Morris, J.E., Tilford, T., Bailey, C., Sinclair, K.I. and Desmulliez, M.P.Y. (2009) Polymer cure modeling for microelectronics applications. In: 32nd International Spring Seminar on Electronics Technology, 2009. ISSE 2009. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4244-4260-7 (print) (doi:10.1109/ISSE.2009.5206929)

differential equations

McBride, Diane (2003) Vertex-based discretisation methods for thermo-fluid flow in a finite volume-unstructured mesh context. PhD thesis, University of Greenwich.

differential scanning calorimetry

diffusion

diffusion problem

digital simulation

Yao, Jun, Yao, Yufeng, Patel, Mayur and Mason, Peter J. (2007) On Reynolds number and scaling effects in microchannel flows. The European Physical Journal Applied Physics, 37 (2). pp. 229-235. ISSN 1286-0042 (doi:10.1051/epjap:2007010)

dilute phase pneumatic conveying

distributed manipulation

distributed processing

Jones, Beryl Wyn (1994) Mapping unstructured mesh codes onto local memory parallel architectures. PhD thesis, University of Greenwich.

droplet generation

droplet oscillations

Bojarevics, Valdis and Pericleous, Koulis A. (2007) Droplet oscillations in high gradient magnetic field. Microgravity Science and Technology, 21 (1-2). pp. 119-122. ISSN 0938-0108 (Print) 1875-0494 (Online) (doi:10.1007/s12217-008-9055-y)

Bojarevics, Valdis and Pericleous, Koulis A. (2009) Levitated droplet oscillations: effect of internal flow. Magnetohydrodynamics, 45 (3). pp. 475-486. ISSN 0024-998X

Bojarevics, V. and Pericleous, K. (2009) Droplet oscillations in high gradient static magnetic field. Microgravity Science and Technology, 21 (1-2). pp. 119-122. ISSN 0938-0108 (Print), 1875-0494 (Online) (doi:10.1007/s12217-008-9055-y)

drug delivery

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

dynamic load balancing

dynamic multiphysics modelling

dynamics

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

eddy dissipation model (EDM)

Wang, Zhaozhi, Jia, Fuchen, Galea, Edwin R. and Patel, Mayur (2007) Predicting toxic species concentrations in a full-scale vitiated fire. In: Interflam 2007 11th International Fire Science and Engineering Conference. Interflam, 2 . Interscience Communications Ltd, London, pp. 1047-1058. ISBN 9780954121693

effluent toxicity

Robinson, J.E., Hull, T.R., Lebek, K., Stec, A.A., Galea, Edwin R., Mahalingam, Arun, Jia, Fuchen, Patel, Mayur and Persson, H. (2007) Assessment of the impact of computed and measured fire environments on building evacuation using bench and real scale test data. In: Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications, Greenwich, pp. 873-884. ISBN 9780954121693

egress

egress strategy

egress times

elasto-visco plasticity

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

electric aircraft

Bailey, Christopher, Lu, Hua and Newcombe, D.R. (2007) Rapid solutions for application specific IGBT module design. In: International Exhibition and Conference for Power Electronics, Intelligent Motion and Power Quality (PCIM Europe 2007). Curran Associates, Inc., Red Hook , New York. ISBN 9781604231816

electric car

electrical configurations

Lu, Hua, Loh, Wei-Sun, Tilford, Tim, Johnson, M. and Bailey, Christopher (2007) Reliability of power electronic modules. In: ASME 2007 InterPACK Conference. American Society of Mechanical Engineers, New York, pp. 883-888. ISBN 0791842789 (doi:10.1115/IPACK2007-33817)

electrical connections

Yin, Chunyan, Lu, Hua, Bailey, Christopher and Chan, Y.C. (2006) Macro-micro modelling of moisture induced stresses in an ACF flip chip assembly. Soldering & Surface Mount Technology, 18 (2). pp. 27-32. ISSN 0954-0911 (doi:10.1108/09540910610665107)

electro-metallurgy

electrodeposition

Kaufmann, Jens, Desmulliez, Marc P.Y., Price, Dennis, Hughes, Mike, Strusevitch, Nadia and Bailey, Chris (2008) Influence of megasonic agitation on the electrodeposition of high aspect ratio blind vias. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1235-1240. ISBN 978-1-4244-2813-7 (doi:10.1109/ESTC.2008.4684530)

Strusevitch, Nadia, Hughes, Michael, Bailey, Christopher and Djambazov, Georgi (2008) Numerical modelling of electrodeposition phenomena. In: 2nd Electronics System-Integration Technology Conference, Greenwich, UK, 1-4 September 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 281-286. ISBN 978-1-4244-2813-7 (Print) 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684362)

electromagnetic

Bojarevics, Valdis and Pericleous, Koulis A. (2008) Levitated droplet oscillations: effect of internal flow. In: Proceedings of the 7th International PAMIR Conference: Fundamental and Applied MHD and COST P17 Annual Workshop 2008. Institute of Physics, University of Latvia, Salaspils, Latvia, pp. 159-164.

electromagnetic field

Djambazov, Georgi, Pericleous, Koulis A. and Bojarevics, Valdis (2009) Effect of varying electromagnetic field on the VAR process. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

electromagnetic force

Bojarevics, Valdis and Pericleous, Koulis A. (2007) Numerical modelling for electromagnetic processing of materials. In: Magnetohydrodynamics: historical evolution and trends. Fluid Mechanics and Its Applications, 80 (4). Springer Netherlands, Dordrecht, pp. 357-374. ISBN 9781402048326 (doi:10.1007/978-1-4020-4833-3)

electromagnetic forces

Easter, Stuart (2012) Modelling of liquid droplet dynamics in a high DC magnetic field. PhD thesis, University of Greenwich.

electromagnetic levitation

Bardet, Benoit, Bojarevics, Valdis, Pericleous, Koulis A. and Etay, Jacqueline (2006) Numerical simulation of free surface behaviour of a molten liquid metal Droplet with and without electromagnetic induction. In: Proceedings of the 5th International Symposium on Electromagnetic Processing of Materials. The Iron and Steel Institute of Japan, Tokyo, pp. 306-310. ISBN 978-4-930980-55-7

Bojarevics, Valdis and Pericleous, Koulis A. (2009) Levitated droplet oscillations: effect of internal flow. Magnetohydrodynamics, 45 (3). pp. 475-486. ISSN 0024-998X

electromagnetic processing

electromagnetic processing of materials (EPM)

electromechanical devices

electromigration

electron bombardment

electronic applications

electronic components

Bailey, Christopher, Lu, Hua, Stoyanov, Stoyan, Yin, Chunyan, Tilford, Tim and Ridout, Stephen (2008) Predictive reliability and prognostics for electronic components: current capabilities and future challenges. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 67-72. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276460)

electronic engineering

Tilford, Tim, Sinclair, Keith I., Bailey, Christopher, Desmulliez, Marc P.Y., Goussetis, George, Parrott, Kevin and Sangster, Alan J. (2007) Multiphysics simulation of microwave curing in micro-electronics packaging applications. Soldering & Surface Mount Technology, 19 (3). pp. 26-33. ISSN 0954-0911 (doi:10.1108/09540910710843757)

electronic packaging

electronic product design

electronic products

Bailey, C., Warner, M., Agha, A., Pericleous, K., Parry, J., Marooney, C., Reeves, H. and Clark, I. (2002) Flo/Stress: an integrated software module to predict stress in electronic products. Computing and Control Engineering Journal, 13 (3). pp. 143-148. ISSN 0956-3385 (doi:10.1049/ccej:20020306)

electronics

Rizvi, Mohammed Jahir (2007) Experimental and modelling studies of electronic packaging interconnections formed with lead-free materials. PhD thesis, University of Greenwich.

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

electronics design

electronics industry

electronics packaging

electroplating

embedded die

Bailey, Christopher, Stoyanov, Stoyan, Strusevitch, Nadia and Yannou, J.-M. (2007) Reliability analysis of SiP structures. In: IMAPS Poland 2007: 31 International conference and exhibition: Proceedings. Institute of Electrical and Electronics Engineers, Inc.. ISBN 9788391770146

embrittlement

emergency evacuation

emergency signage

EML

emotional arousal

Hulse, Lynn and Memon, Amina (2006) Fatal impact? The effects of emotional arousal and weapon presence on police officers' memories for a simulated crime. Legal and Criminological Psychology, 11 (2). pp. 313-325. ISSN 1355-3259 (doi:10.1348/135532505X58062)

encapsulant

encapsulant curing

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical simulation of encapsulant curing within a variable frequency microwave processing system. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2008. EuroSimE 2008. International Conference on. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 447-454. ISBN 978-1-4244-2127-5 (doi:10.1109/ESIME.2008.4525086)

enclosure fire

enclosure fires

Mahalingam, Arun, Jia, Fuchen, Patel, Mayur and Galea, Edwin R. (2007) Modelling generation and transport of toxic combustion products in enclosure fires using bench-scale test data. In: Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications, Greenwich, pp. 1631-1636. ISBN 9780954121693

end-fed probes

Sinclair, Keith I., Sangster, Alan J., Goussetis, George, Desmulliez, Marc P.Y., Tilford, Tim, Parrott, Kevin and Bailey, Christopher (2007) Open ended microwave oven for flip-chip assembly. In: 2007 European Microwave Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 620-623. ISBN 9782874870019

energy

Shala, Mehmet, Patel, Mayur and Pericleous, Koulis A. (2006) Unstructured staggered mesh methods for fluid flow, heat transfer and phase change. WSEAS Transactions on Fluid Mechanics, 1 (5). pp. 431-438. ISSN 1790-5087

Shala, Mehmet, Pericleous, Koulis A. and Patel, Mayur (2007) Numerical simulation of incompressible flow problems using an unstructured staggered mesh method. Journal of Algorithms and Computational Technology, 1 (3). pp. 273-302. ISSN 1748-3018 (doi:10.1260/174830107782424066)

Shala, Mehmet, Pericleous, Koulis A. and Patel, Mayur (2006) A two dimensional unstructured staggered mesh method with special treatment of tangential velocity. In: 4th WSEAS International Conference on Fluid Mechanics and Aerodynamics, August 21-23, 2006, Elounda, Greece.

energy efficiency

enthalpy

Kao, Andrew, Djambazov, Georgi, Pericleous, Koulis A. and Voller, V. (2009) Thermoelectric MHD in dendritic solidification. Magnetohydrodynamics, 45 (3). pp. 305-315. ISSN 0024-998X

equations

Dincov, Dusko D. (2002) Fully coupled CEM/CFD modelling of microwave heating in a porous medium. PhD thesis, University of Greenwich.

Ierotheou, Constantinos Savvas (1990) The simulation of fluid flow processes using vector processors. PhD thesis, Thames Polytechnic.

equiaxed crystal morphology

Kao, Andrew, Pericleous, Koulis A., Patel, Mayur and Voller, V. (2009) Thermoelectric MHD effects on equiaxed crystal morphology. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf

escalator

estimate of cure

Eulerian Finite Volume type models

evacuation

Deere, Steven, Galea, Edwin R. and Lawrence, Peter (2008) Assessing the suitability of ship design for human factors issues associated with evacuation and normal operations. In: 7th International Conference on Computer and IT Applications in the Maritime Industries - COMPIT’08. Architecture Navale, Génie Maritime, Navigation Intérieure et Maritime, Analyse des Systèmes de Transport, Liège, Belgium, pp. 33-47. ISBN 2-9600785-0-0; 978-2-9600785-0-3 ISSN ISBN-10 2-9600785-0-0; ISBN-13 978-2-9600785-0-3

Deere, Steven J., Galea, Edwin R. and Lawrence, Peter J. (2010) Optimising vessel layout using human factors simulation. In: Pedestrian and Evacuation Dynamics 2008. Springer-Verlag, Berlin / Heidelberg, Germany, pp. 597-603. ISBN 978-3-642-04503-5 (Print), 978-3-642-04504-2 (Online) (doi:10.1007/978-3-642-04504-2_54)

Filippidis, Lazaros, Galea, Edwin R., Gwynne, Steve and Lawrence, Peter (2006) Representing the influence of signage on evacuation behavior within an evacuation model. Journal of Fire Protection Engineering, 16 (1). pp. 37-73. ISSN 1042-3915 (doi:10.1177/1042391506054298)

Galea, E., Lawrence, P., Blake, S., Dixon, A. and Westeng, H. (2007) The 2001 World Trade Centre evacuation. In: Pedestrian and Evacuation Dynamics 2005. Springer, Berlin / Heidelberg, pp. 225-238. ISBN 9783540470625 (doi:10.1007/978-3-540-47064-9_20)

Galea, E.R., Shields, J., Canter, D., Boyce, K., Day, R., Hulse, L., Siddiqui, A., Summerfield, L., Marselle, M. and Greenall, P. (2006) Methodologies employed in the collection, retrieval and storage of human factors information derived from first hand accounts of survivors of the WTC disaster of 11 September 2001. Journal of Applied Fire Science, 15 (4). pp. 253-276. ISSN 1044-4300 (doi:10.2190/AF.15.4.b)

evacuation analysis

Deere, S.J., Galea, E.R. and Lawrence, P.J. (2009) A systematic methodology to assess the impact of human factors in ship design. Applied Mathematical Modelling, 33 (2). pp. 867-883. ISSN 0307-904X (doi:10.1016/j.apm.2007.12.014)

evacuation dynamics

evacuation experience

Galea, Edwin, Hulse, Lynn, Day, Rachel, Siddiqui, Asim and Sharp, Gary (2009) The UK WTC 9/11 evacuation study: an overview of the methodologies employed and some analysis relating to fatigue, stair travel speeds and occupant response times. In: 4th International Symposium on Human Behaviour in Fire: Conference Proceedings. Interscience Communications Ltd., Greenwich, London, UK, pp. 27-40. ISBN 978-0-9556548-3-1

evacuation experiences

evacuation model

Gwynne, S., Galea, E.R., Lyster, C. and Glen, I. (2003) Analysing the evacuation procedures employed on a Thames passenger boat using the maritimeEXODUS evacuation model. Fire Technology, 39 (3). pp. 225-246. ISSN 0015-2684 (print), 1572-8099 (electronic) (doi:10.1023/A:1024189414319)

evacuation modelling

Xie, Hui, Filippidis, Lazaros, Gwynne, Steve, Galea, Edwin R., Blackshields, Darren and Lawrence, Peter (2007) Signage legibility distances as a function of observation angle. Journal of Fire Protection Engineering, 17 (1). pp. 41-64. ISSN 1042-3915 (doi:10.1177/1042391507064025)

evacuation models

evacuation procedure

evacuation simulation

Galea, Edwin R. (2006) Modelling human behaviour in underground emergency situations. In: Proceedings of the 2nd International Symposium on Tunnel Safety and Security. Intevia, Madrid, Spain, pp. 149-151.

evacuation simulations

Galea, Edwin R., Sharp, Gary, Lawrence, Peter and Dixon, Andrew J. (2007) Investigating the impact of occupant response time on computer simulations of the WTC North Tower evacuation. In: Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications Ltd, Greenwich, pp. 1435-1442. ISBN 9780954121693

evacuation time

evacuation times

evacuation trials

evaluation

evaluation methodologies

evolutionary search

Soper, Alan, Walshaw, Christopher and Cross, Mark (2000) A combined evolutionary search and multilevel approach to graph partitioning. In: GECCO-2000: proceedings of the Genetic and Evolutionary Computation Conference : a joint meeting of the Ninth International Conference on Genetic Algorithms (ICGA-2000) and the Fifth Annual Genetic Programming Conference (GP-2000), July 10-12, 2000, Las V. Morgan Kaufmann Publishers, San Francisco, USA, pp. 674-681. ISBN 978-1558607088

Soper, Alan, Walshaw, Christopher and Cross, Mark (2000) A combined evolutionary search and multilevel optimisation approach to graph partitioning. Technical Report. CMS Press, London, UK. (doi:Tech. Rep. 00/IM/58)

Soper, Alan, Walshaw, Christopher and Cross, Mark (2004) A combined evolutionary search and multilevel optimisation approach to graph-partitioning. Journal of Global Optimization, 29 (2). pp. 225-241. ISSN 0925-5001 (print) 1573-2916 (electronic)

existence uniqueness theorem

Planitz, M. (1985) Existence and uniqueness of best approximants, with numerical applications. PhD thesis, Thames Polytechnic.

exit availability

exit awareness

exit configuration

exit configurations

experimental study

explosions

Vince, Ivan and Patel, Mayur (2006) Explosion in fume cupboard damages several laboratories. Loss Prevention Bulletin, 187. pp. 6-8. ISSN 0260-9576

external fuel fire

fabrication

Stoyanov, Stoyan, Amalou, Farid, Sinclair, Keith I., Bailey, Christopher and Desmulliez, Marc P.Y. (2008) Minimising the risk of defects in nano-imprint forming. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 367-372. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276670)

face-to-face interviews

failure

failure analysis

failure based reliability

failure mechanisms

failure modes

failure modes and mechanisms

Bailey, Christopher, Lu, Hua and Tilford, Tim (2007) Predicting the reliability of power electronic modules. In: ICEPT: 2007 8th International Conference On Electronics Packaging Technology, Proceedings. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 809-813. ISBN 9781424413911 (doi:10.1109/ICEPT.2007.4441543)

fatigue

fatigue life-time

FEA

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

ferrous operations

fibre bond failure

fibre failure

fibre/fibre bond failure

financial modelling

finite difference

finite difference method

finite element

Bailey, Christopher, Tilford, Tim, Ridout, Stephen and Lu, Hua (2008) Optimizing the reliability of power electronics module isolation substrates. In: EngOpt 2008: International Conference on Engineering Optimization. Universidade Federal do Rio de Janeiro, Rio de Janeiro, Brazil. ISBN 978-85-7650-152-7 (print and CD ROM)

finite element (FE) method

finite element analysis

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

finite element analysis (FEA)

Finite Element Analysis(FEA)

finite element modelling

finite volume

finite volume method

Dincov, Dusko D. (2002) Fully coupled CEM/CFD modelling of microwave heating in a porous medium. PhD thesis, University of Greenwich.

finite volume methods

Pericleous, K., Kountouriotis, Z., Djambazov, G., Domgin, J.F. and Gardin, P. (2010) Experimental and numerical simulation of the mould region of a steel continuous caster. In: ICNAAM 2010: International Conference of Numerical Analysis and Applied Mathematics 2010. American Institute of Physics, Melville, USA, pp. 95-98. ISBN 9780735408340 ISSN 0094-243X (doi:10.1063/1.3498655)

finite-element model

Keye, Stefan (2003) Model updating of modal parameters from experimental data and applications in aerospace. PhD thesis, University of Greenwich.

fire

fire design

fire field

fire field model

fire field modelling

fire investigation

fire modelling

Grandison, Angus, Galea, Edwin R., Patel, Mayur and Ewer, John (2006) A suggested procedure for benchmarking fire field models. International Journal on Engineering Performance-Based Fire Codes, 8 (4). pp. 132-144. ISSN 1561-9559

fire modelling expertise

fire safety

Galea, E. (2006) CFD fire simulation of the Swissair flight 111 in-flight fire – Part 1: Prediction of the pre-fire air flow within the cockpit and surrounding areas. The Aeronautical Journal, 110 (1103). ISSN 0001-9240

fire safety codes

fire simulation

first-hand accounts

flashover

flashover time

Flex-No-Lead project

Rizvi, M.J., Yin, C.Y, Bailey, C. and Lu, H. (2007) Performance and reliability of flexible substrates when subjected to lead-free processing. In: 16th European Microelectronics and Packaging Conference and Exhibition 2007(EMPC 2007). Curran Associates, Inc., Red Hook, NY, USA, pp. 589-594. ISBN 9781622764662

flexible substrates

Yin, Chunyan, Lu, Hua, Bailey, Christopher and Chan, Y. (2006) Analyzing the performance of flexible substrates for lead-free applications. In: Proceedings of EuroSime 2006 : 7th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems. IEEE, pp. 539-544. ISBN 1 4244 0276 X (doi:10.1109/ESIME.2006.1644052)

Yin, Chunyan, Rizvi, M.J., Lu, Hua and Bailey, Christopher (2006) Thermal-mechanical analysis of flexible substrates during lead-free solder reflow. In: Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 1007-1011. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280134)

flexible-substrates

flip-chip assembly

flip-chip packaging

Stoyanov, Stoyan, Kay, Robert W., Bailey, Christopher and Desmulliez, Marc P.Y. (2007) Computational modelling for reliable flip-chip packaging at sub-100 micron pitch using isotropic conductive adhesives. Microelectronics Reliability, 47 (1). pp. 132-141. ISSN 0026-2714 (doi:10.1016/j.microrel.2006.01.004)

flip-chip underfills

flow

flow induced cavity noise

flow solution

fluid

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

fluid dynamics

McBride, Diane (2003) Vertex-based discretisation methods for thermo-fluid flow in a finite volume-unstructured mesh context. PhD thesis, University of Greenwich.

fluid flow

Frost, Nageena Kiani (2006) CFD modelling of fluid flow and contaminant transport in hydrogeological systems. PhD thesis, University of Greenwich.

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

fluid flow problems

Patel, Mayur K. (1986) On the false-diffusion problem in the numerical modelling of convection-diffusion processes. PhD thesis, Thames Polytechnic.

fluid mechanics

Chan, Andrew Koon Sang (1994) Free surface flow and application to the filling and solidification of liquid metals into vessels of arbitrary shape. PhD thesis, University of Greenwich.

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

Fenech, Keith Alexander (1987) Analysing aspects of the performance of an ironblast furnace. PhD thesis, Thames Polytechnic.

Ierotheou, Constantinos Savvas (1990) The simulation of fluid flow processes using vector processors. PhD thesis, Thames Polytechnic.

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

Patel, Mayur K. (1986) On the false-diffusion problem in the numerical modelling of convection-diffusion processes. PhD thesis, Thames Polytechnic.

flux

focused ion beam

Narania, Sailesh, Eshahawi, Tarek, Gindy, Nabil, Tang, Ying Kit, Stoyanov, Stoyan, Ridout, Stephen and Bailey, Chris (2008) Risk mitigation framework for a robust design process. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1075-1080. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684501)

Focused Ion Beam (FIB) method

foil

Yin, Chunyan, Lee, Youngjo, Bailey, Christopher, Riches, Steve, Cartwright, C., Sharpe, R. and Orr, H. (2007) Thermal analysis of LEDS for liquid crystal display's backlighting. In: ICEPT: 2007 8th International Conference On Electronics Packaging Technology, Proceedings. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 212-216. ISBN 9781424413911 (doi:10.1109/ICEPT.2007.444141)

Fourier transform infra-red spectroscopy (FTIR)

fourth-order partial diffusion equation

fractal

fractal image compression

Fractal video compression

Peng, T., Wang, Meiqing and Lai, Choi-Hong (2007) Design of parallel algorithms for fractal video compression. International Journal of Computer Mathematics, 84 (2). pp. 193-202. ISSN 0020-7160 (doi:10/1080/00207160601168456)

fractals

Fractional Effective Dose (FDE)

fracture

fracture mechanics

Alam, M.O., Lu, Hua, Bailey, Christopher and Chan, Y.C. (2008) Fracture mechanics analysis of cracks in solder joint intermetallic compounds. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 757-762. ISBN 978-1-4244-2813-7 (doi:10.1109/ESTC.2008.4684445)

fracture propogation path

freckle formation

Yuan, L., Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8

free surface

free surface dynamics

free surface instability

freeze layer modelling

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

frequency agile microwave oven bonding system (FAMOBS)

gas atomization

Lena, Claudio, Djambazov, Georgi and Pericleous, Koulis A. (2008) Modelling metal powder production by the gas atomisation process. In: TMS 2008 Annual Meeting Supplemental Proceedings: Volume 2: Materials Characterization, Computation and Modeling. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 279-285. ISBN 978-0-87339-717-9

gas flow

Fenech, Keith Alexander (1987) Analysing aspects of the performance of an ironblast furnace. PhD thesis, Thames Polytechnic.

genetic algorithms

glass transition temperature

glob top

globtop

globtop design

granular flow

granular material

granular mixtures

graph partitioning

Walshaw, Christopher and Cross, Mark (2007) JOSTLE: multilevel graph partitioning software: an overview. In: Mesh partitioning techniques and domain decomposition techniques. Saxe-Coburg Publications, Stirling, Scotland, UK, pp. 27-58. ISBN 9781874672296 (doi:10.4203/csets.17.2)

graph-partitioning

gravity

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

hazard evaluation

heaping

heat

Dincov, Dusko D. (2002) Fully coupled CEM/CFD modelling of microwave heating in a porous medium. PhD thesis, University of Greenwich.

heat conduction

Guo, Q., Shen, D., Guo, Y. and Lai, Choi-Hong (2007) Parallel genetic algorithms for the solution of inverse heat conduction problems. International Journal of Computer Mathematics, 84 (2). pp. 241-250. ISSN 0020-7160 (doi:10.1080/00207160601169967)

heat engineering

Fenech, Keith Alexander (1987) Analysing aspects of the performance of an ironblast furnace. PhD thesis, Thames Polytechnic.

heat exchangers

heat sensitive film

heat sinks

heat transfer

Alessandri, E., Mawhinney, R.N., Patel, Mayur and Galea, Edwin R. (1996) Revisiting the carrier-phase source-term formulation in mixed Lagrangian-Eulerian particle models. Numerical Heat Transfer, Part B: Fundamentals, 30 (1). pp. 111-116. ISSN 1521-0626 (electronic) 1040-7790 (paper) (doi:10.1080/10407799608915074)

Bojarevics, Valdis (1996) Buoyancy driven flow and its stability in a horizontal rectangular channel with an arbitrary oriented transversal magnetic field. Magnetohydrodynamics, 31 (3). pp. 245-253. ISSN 0024-998X

Bojarevics, Valdis, Easter, S., Roy, A. and Pericleous, Koulis A. (2009) Levitated liquid droplets in AC and DC magnetic field. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8

Tilford, Tim, Baginski, Ed, Kelder, Jasper, Parrott, Kevin and Pericleous, Koulis A. (2007) Microwave modelling and validation in food thawing applications. Journal of Microwave Power & Electromagnetic Energy, 41 (4). pp. 30-45. ISSN 0832-7823

Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.

heating

Sinclair, K.I., Goussetis, G., Desmulliez, M.P.Y., Sangster, A.J., Tilford, T., Bailey, C. and Parrott, A.K. (2008) Optimization of an open-ended microwave oven for microelectronics packaging. IEEE Transactions on Microwave Theory and Techniques, 56 (11). pp. 2635-2641. ISSN 0018-9480 (doi:10.1109/TMTT.2008.2005925)

HEED database

Helmholtz

high current density induced damage

high density interconnection technology

high density packaging

high rise building

high rise buildings

high-rise building

high-rise building evacuation

high-rise buildings

High-rise Evacuation Evaluation Database (HEED)

High-rise Evaculation Evaluation Database (HEED)

historic

human behaviour

human experience in evacuation

human experience of evacuation

human factors

Human Performance Metric

Andrews, D., Casarosa, L., Deere, Steven, Galea, Edwin R., Lawrence, Peter and Pawling, R. (2007) Integrating personnel movement simulation into preliminary ship design. In: Human Factors in Ship Design, Safety and Operation, 21-22 March 2007, London, UK. Royal Institution of Naval Architects, London, UK, pp. 117-128. ISBN 1905040342

Andrews, D., Casarosa, L., Pawling, R., Galea, E., Deere, S. and Lawrence, P. (2008) Integrating personnel movement simulation into preliminary ship design. Transactions of The Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 150 (A1). pp. 19-34. ISSN 1479-8751

hybrid method

hybrid vibro-acoustic model

hydrodynamics

Bojarevics, V. and Pericleous, K. (2008) Dynamic melting model for small samples in cold crucible. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 27 (2). pp. 350-358. ISSN 0332-1649 (doi:10.1108/03321640810847634)

hydrogen chloride

hydrological modelling

Frost, Nageena Kiani (2006) CFD modelling of fluid flow and contaminant transport in hydrogeological systems. PhD thesis, University of Greenwich.

hydrological transport model

Frost, Nageena Kiani (2006) CFD modelling of fluid flow and contaminant transport in hydrogeological systems. PhD thesis, University of Greenwich.

IGBT module

image processing

IMO

impact

IMPRESS

individual surface mount components

induction

induction heating

induction melting

induction skull melting (ISM)

industrial processes

Chan, Andrew Koon Sang (1994) Free surface flow and application to the filling and solidification of liquid metals into vessels of arbitrary shape. PhD thesis, University of Greenwich.

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

information theory

Johnson, Stephen Philip (1992) Mapping numerical software onto distributed memory parallel systems. PhD thesis, Thames Polytechnic.

information visualisation

inpainting

Chen, Fei, Wang, Mei-quing and Lai, Choi-Hong (2008) An algorithm for total variation inpainting based on nonlinear multi-grid methods. Journal of Algorithms & Computational Technology, 2 (1). pp. 15-33. ISSN 1748-3018 (doi:10.1260/174830108784300303)

integrated software module

integration

interaction design

interactions

interface problems

Lai, C.-H. (1997) An application of quasi-Newton methods for the numerical solution of interface problems. Advances in Engineering Software, 28 (5). pp. 333-339. ISSN 0965-9978 (doi:10.1016/S0965-9978(97)00009-4)

interface wave

interface waves

interfacial reaction

interfacial reaction phenomena

intermetallic compound

intermetallic compound (IMC)

intermetallic compound layer

internal combustion engines

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

interviews

inverse problem

investment casting

Wang, Hong, Djambazov, Georgi, Pericleous, Koulis A., Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and SOns, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1

iochemical engineering

Versluis, Antheunis (1994) Origin and development of internal stresses during polymerization of composite resins. PhD thesis, University of Greenwich.

isolation substrate

isotropic conductive adhesives (ICAs)

iterative parallelization

jet impingement cooling system

joints

K-Omega turbulence model

Bojarevics, Valdis, Roy, A., Easter, S. and Pericleous, Koulis A. (2009) Magnetic damping of levitated liquid droplets in AC and DC field. In: 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

kinematic-hardening

knowledge database

lab-on-a-chip

laboratories

Vince, Ivan and Patel, Mayur (2006) Explosion in fume cupboard damages several laboratories. Loss Prevention Bulletin, 187. pp. 6-8. ISSN 0260-9576

Lagrangian Particle Dispersion (LPD) models

Lagrangian particle tracking

laminar fluid flow

Easter, Stuart (2012) Modelling of liquid droplet dynamics in a high DC magnetic field. PhD thesis, University of Greenwich.

Laplace transform

laplacian

large-scale engineering processes

Laser Doppler Anemometry

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

laser spot weld formation

Malik, Asif, Hughes, Michael and Bailey, Christopher (2006) Optoelectronic packaging interfaces for submicron alignment (OPISA) and the dynamics of laser spot weld formation. In: Proceedings of the 1st Electronics Systemintegration Technology Conference, 2006. IEEE, pp. 387-391. ISBN 1 4244 0552 1 (doi:10.1109/ESTC.2006.280031)

LCD backlighting

LDA

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

lead free applications

lead free solder

lead free solder interconnects

lead-free soldering

lead-free solders

Rizvi, Mohammed Jahir (2007) Experimental and modelling studies of electronic packaging interconnections formed with lead-free materials. PhD thesis, University of Greenwich.

level set method

levitation

library facilities

life prediction

life-time

LIGA

light emitting diode (LED)

liquid metal

liquid metal induction heating

liquid metals

live incidents

local equivalence ratio

log-normal distribution

logistic squashing function

loss modulus

low power tests

low temperature (T<100 C)

low-loss dielectric

lumped systems

magnetic field

Kao, Andrew, Djambazov, Georgi, Pericleous, Koulis A. and Voller, V. (2009) Thermoelectric MHD in dendritic solidification. Magnetohydrodynamics, 45 (3). pp. 305-315. ISSN 0024-998X

magnetic fields

Pericleous, Koulis A., Djambazov, Georgi, Bojarevics, Valdis and Ward, R.M. (2009) A unified 3D model of the VAR process. In: International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8

magnetic levitation

magnetic levitation of liquid droplets

magnetohydrodynamic

Djambazov, G., Bojarevics, V. and Pericleous, K. (2009) Vacuum arc remelting time dependent modelling. Magnetohydrodynamics, 45 (4). pp. 579-586. ISSN 0024-998X

Magnetohydrodynamics

Bojarevics, Valdis (1998) Nonlinear waves with electromagnetic interaction in aluminium electrolysis cells. In: Progress in fluid flow research: turbulence and applied MHD. Progress in astronautics and aeronautics (182). American Institute of Aeronautics and Astronautics, Reston, VA. ISBN 1563472848

manufactures

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

manufacturing process

manufacturing processes

Chan, Andrew Koon Sang (1994) Free surface flow and application to the filling and solidification of liquid metals into vessels of arbitrary shape. PhD thesis, University of Greenwich.

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

manufacturing systems

maritimeEXODUS

mass transfer

Dincov, Dusko D. (2002) Fully coupled CEM/CFD modelling of microwave heating in a porous medium. PhD thesis, University of Greenwich.

material physical properties

material properties

materials processing

mathematical modelling

Afzal, Muhammad (1994) Mathematical modelling of gas flow networks in pellet induratlon systems. PhD thesis, University of Greenwich.

Dhinsa, Kulvir Kaur (2006) Development and application of low Reynolds number turbulence models for air-cooled electronics. PhD thesis, University of Greenwich.

Frost, Nageena Kiani (2006) CFD modelling of fluid flow and contaminant transport in hydrogeological systems. PhD thesis, University of Greenwich.

Planitz, M. (1985) Existence and uniqueness of best approximants, with numerical applications. PhD thesis, Thames Polytechnic.

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

Vardoulakis, Sotirios (2002) An operational method for assessing traffic-related air pollution in urban streets. PhD thesis, University of Greenwich.

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

mathematical models

Keye, Stefan (2003) Model updating of modal parameters from experimental data and applications in aerospace. PhD thesis, University of Greenwich.

mathematical statistics

Jones, Beryl Wyn (1994) Mapping unstructured mesh codes onto local memory parallel architectures. PhD thesis, University of Greenwich.

mathematics

Bailey, Christopher, Clapham, S., Cross, Mark, Dixon, T., Wolfe, S. and Norman, P. (1996) Modelling stress evolution during cable fabrication. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (Issue Supplement S4). pp. 97-100. ISSN ISSN: 0044-2267 (print), 1521-4001 (online) (doi:10.1002/zamm.19960761408)

Ierotheou, Constantinos Savvas (1990) The simulation of fluid flow processes using vector processors. PhD thesis, Thames Polytechnic.

McBride, Diane (2003) Vertex-based discretisation methods for thermo-fluid flow in a finite volume-unstructured mesh context. PhD thesis, University of Greenwich.

Patel, Mayur K. (1986) On the false-diffusion problem in the numerical modelling of convection-diffusion processes. PhD thesis, Thames Polytechnic.

Maxwell's equations

MCWASP

MDH

measured temperatures

mechanics

megasonic agitation

melting

melting furnaces

melting/solidification

memory

mesh generation

message passing

metal

metal casting

Taylor, Gareth Anthony (1996) A vertex based discretisation scheme applied to material non-linearity within a multi-physics finite volume framework. PhD thesis, University of Greenwich.

metal melting

metals

Bojarevics, Valdis and Pericleous, Koulis A. (2009) Levitated droplet oscillations: effect of internal flow. Magnetohydrodynamics, 45 (3). pp. 475-486. ISSN 0024-998X

metals casting

Bailey, Christopher, Lyster, C., Cross, Mark, Fryer, Yvonne and Pericleous, Koulis A. (1996) Multiphysics modelling of the metals casting process. Proceedings of the Royal Society A, 452 (1946). pp. 459-486. ISSN Online: 1471-2946 (doi:10.1098/rspa.1996.0024)

metals reduction process

methodological tools

Conyers, Toby Richard (1999) Automating Abell's theory of comparative narratives. PhD thesis, University of Greenwich.

methodologies

metrics

Conyers, Toby Richard (1999) Automating Abell's theory of comparative narratives. PhD thesis, University of Greenwich.

MHD

MHD flow

MHD instabilities

MHD instability

MHD stability

Micro-electronic displays

micro-electronics manufacture

micro-machining process

micro-manufactured

Lu, Hua, Flynn, David, Bailey, Christopher and Desmulliez, Marc P.Y. (2006) Computer modeling of a micro-manufactured one-turn inductor. In: Proceedings of the Sixth IEEE CPMT Conference on High Density Microsystem Design and Packaging and Component Failure Analysis, 2006. IEEE. ISBN 1 4244 0489 4 (doi:10.1109/HDP.2006.1707562)

micro-probe

Stoyanov, Stoyan, Bailey, Christopher, Leach, Richard, Hughes, Ben, Wilson, Alan, O'Neill, William, Dorey, Robert, Shaw, Christopher, Underhill, Daniel and Almond, Heather (2008) Modelling and prototyping the conceptual design of 3D CMM micro-probe. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 193-198. ISBN 978-1-4244-2814-4 (Print), 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684348)

microassembly

microchannel biochip separator

microchannel systems

microchannels

microelectronics

Bailey, Christopher, Lu, Hua, Stoyanov, Stoyan, Hughes, Michael, Yin, Chunyan and Gwyer, David (2007) Multi-physics modelling for microelectronics and microsystems - current capabilities and future challenges. In: EUROSIME 2007: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, Proceedings. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 4-11. ISBN 9781424411054 (doi:10.1109/ESIME.2007.360048)

microelectronics manufacturing

microelectronics packaging

Ferenets, M., Tilford, Tim, Sinclair, Keith I., Bailey, Christopher and Desmulliez, Marc P.Y. (2009) Microwave curing of thermosetting polymer materials in microelectronics applications. In: Baltic Polymer Symposium 2009, 22-25 September 2009, Ventspils, Latvia.

microfabricated solenoid inductor

microfeeder

microfluidics

microgravity materials research

Pericleous, Kyriacos (2011) Computational science and the future. Public Service Review: UK Science and Technology, 4. pp. 26-27. ISSN 2046-5696 (Online) 2045-3884 (Print)

microinductor

microinductors

microsystem design

microsystems

Bailey, Christopher, Stoyanov, Stoyan, Tang, Ying Kit, Xue, Xiangdong and Tilford, Tim (2008) Multi-physics modelling for the fabrication, packaging and reliability of micro-systems components. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain. ISBN 978-84-96736-55-9

microvias

microwave

Dincov, Dusko D. (2002) Fully coupled CEM/CFD modelling of microwave heating in a porous medium. PhD thesis, University of Greenwich.

Tilford, Tim, Sinclair, Keith I., Rajaguru, P.R., Morris, James E., Desmulliez, Marc P.Y. and Bailey, Christopher (2009) Numerical optimisation of polymer curing using a dual-section microwave system. Annual microwave heating symposium (43rd). pp. 129-136. ISSN 1070-0129

microwave curing

microwave curing system

Adamietz, R., Müller, G., Othman, N., Eicher, F., Tilford, T., Ferenets, M., Pavuluri, S.K., Desmulliez, M. P.Y. and Bailey, C. (2010) On the integration of microwave curing systems into microelectronics assembly processes. In: Electronics System Integration Technology Conference, ESTC 2010 - Proceedings. IEEE Computer Society, Piscataway, USA, pp. 1-6. ISBN 9781424485536 (Print), 9781424485543 (Online) (doi:10.1109/ESTC.2010.5642827)

microwave energy

microwave heating

microwave oven

microwave processing

microwave radiation

microwave system

microwave systems

microwave thawing of frozen food

microwaves

Miner's linear damage accumulation

modeling

modeling iron

modelling

Dincov, Dusko D. (2002) Fully coupled CEM/CFD modelling of microwave heating in a porous medium. PhD thesis, University of Greenwich.

modelling analysis

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

modelling biofluids

modelling methodology

modelling technologies

modified EDM

moisture

momentum

mould

mould design

mould filling

moving interfaces

moving meshes

MPI

multi-grid

multi-phase flow

multi-physics

multi-physics modelling

multi-scale

multilevel optimisation

multilevel refinement

multiphase flow

multiphyics problems

multiphysics

multiphysics analysis

multiphysics modelling

multiscale modeling

Nano-Imprint Forming (NIF)

nano-techology

nanotechnology

narrow body aircraft

naval architecture

Navier-Stokes

neural networks

Zhao, Jun, Patel, Mayur and Knight, Brian (1996) A self-organising neural network for optimal grid distribution. CMS Paper S, 9 (6). CMS Press, London. ISBN 1899991115 (doi:978-1899991112)

non-articulated trains

non-linear Black-Scholes equation

non-linear transient finite element simulations

Stoyanov, Stoyan, Bailey, Christopher, Strusevitch, Nadia and Yannou, J.-M. (2007) Computational approach for reliable and robust system-in-package design. In: 2007 30th International Spring Seminar On Electronics Technology. International Spring Seminar on Electronics Technology ISSE . Institute of Electrical and Electronics Engineers, Inc., New York, pp. 40-45. ISBN 9781424412174 (doi:10.1109/ISSE.2007.4432818)

nonlinear waves

numerical analysis

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

Planitz, M. (1985) Existence and uniqueness of best approximants, with numerical applications. PhD thesis, Thames Polytechnic.

Wade, Kevin Christopher (1987) SARK: a type-insensitive Runge-Kutta code. PhD thesis, Thames Polytechnic.

numerical analysis of ODE

Wade, Kevin Christopher (1987) SARK: a type-insensitive Runge-Kutta code. PhD thesis, Thames Polytechnic.

numerical diffusion

Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.

numerical model

Bojarevics, Valdis and Pericleous, Koulis A. (2009) Levitated droplet oscillations: effect of internal flow. Magnetohydrodynamics, 45 (3). pp. 475-486. ISSN 0024-998X

Kao, Andrew, Djambazov, Georgi, Pericleous, Koulis A. and Voller, V. (2009) Thermoelectric MHD in dendritic solidification. Magnetohydrodynamics, 45 (3). pp. 305-315. ISSN 0024-998X

numerical modelling

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

Easter, Stuart (2012) Modelling of liquid droplet dynamics in a high DC magnetic field. PhD thesis, University of Greenwich.

Strusevitch, Nadia, Stoyanov, Stoyan, Liu, D., Bailey, Christopher, Richardson, A., Dumas, N., Yannou, J.M. and Georgel, V. (2006) Modelling the behavior of solder joints for wafer level SiP. In: 2006 8th Electronics Packaging Technology Conference (EPTC 2006) : 6-8 December 2006, Singapore. IEEE, Picsataway, N.J., pp. 127-132. ISBN 1424406641; 142440665X (doi:10.1109/EPTC.2006.342703)

Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.

numerical modelling tools

Bojarevics, Valdis, Djambazov, Georgi and Pericleous, Koulis A. (2008) Vacuum arc remelting time dependent modelling. In: Proceedings of the International Scientific Colloquium, Modelling for Electromagnetic Processing, Hannover, 27-29 October, 2008. Leibniz University of Hannover, Hannover, Germany, pp. 25-28. ISBN 978-3-00-026003-2

Djambazov, G., Bojarevics, V. and Pericleous, K. (2009) Vacuum arc remelting time dependent modelling. Magnetohydrodynamics, 45 (4). pp. 579-586. ISSN 0024-998X

numerical models

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

numerical optimisation

Alessandri, E., Buchlin, J.M. and Patel, Mayur (1996) Numerical optimisation of water curtain barriers design. Technical Report. University of Greenwich, London. (doi:1899991166)

numerical optimisation techniques

numerical PDE

numerical schemes

numerical simulation

numerical simulations

numerical solution

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

Nusselt number

NXP

observation

Xie, Hui, Filippidis, Lazaros, Galea, Edwin R., Gwynne, Steve, Blackshields, Darren and Lawrence, Peter (2007) Experimental study and theoretical analysis of signage legibility distances as a function of observation angle. In: Pedestrian and Evacuation Dynamics 2005. Springer Berlin, Berlin, pp. 131-143. ISBN 9783540470625 (doi:10.1007/978-3-540-47064-9_12)

occlusion

Sakaguchi, Ronald L. (1988) A biophysical analysis of the occlusal wear of dental materials. PhD thesis, Thames Polytechnic.

off-chip interconnection

off-gas ducting system

Kostamis, Photis (1987) Computer modelling and analysis of particulate laden gas flows. PhD thesis, Thames Polytechnic.

Oldroyd-B

on-chip interconnection

one turn inductor

open area

open-ended microwave curing system

Tilford, Tim, Sinclair, Keith I., Goussetis, George, Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2007) Variable frequency microwave curing of polymer materials in microelectronics packaging applications. In: 2007 9th Electronics Packaging Technology Conference. Electronics Packaging Technology Conference Proceedings . Institute of Electrical and Electronics Engineers, Inc., New York, pp. 791-796. ISBN 9781424413232 (doi:10.1109/EPTC.2007.446975)

open-ended microwave oven

open-ended waveguide cavity oven

open-oven

openMP

operations research

Jones, Beryl Wyn (1994) Mapping unstructured mesh codes onto local memory parallel architectures. PhD thesis, University of Greenwich.

OPISA

optical interconnects

Misselbrook, P., Gwyer, David, Bailey, Christopher, Conway, P.P. and Williams, K. (2007) Review of the technology and reliability issues arising as optical interconnects migrate onto the circuit board. In: Micro- and opto-electronic materials and structures: physics, mechanics, design, reliability, packaging. Springer, Boston, pp. 361-382. ISBN 978038727974 9 (doi:10.1007/0-387-32989-7_34)

optical performance

optimal location

optimisation

optimization

Planitz, M. (1985) Existence and uniqueness of best approximants, with numerical applications. PhD thesis, Thames Polytechnic.

optimization of solder

optimization tools

option pricing

opto-electronic assembly

optoelectronic packaging

ordinary differential equations

Wade, Kevin Christopher (1987) SARK: a type-insensitive Runge-Kutta code. PhD thesis, Thames Polytechnic.

organic light emitting diodes (OLED)

oscillating droplet technique

Easter, Stuart (2012) Modelling of liquid droplet dynamics in a high DC magnetic field. PhD thesis, University of Greenwich.

package design parameters

packaged modules

packaging

packaging design

packaging technology

Tilford, Tim, Lu, Hua and Bailey, Christopher (2006) Thermo-mechanical modelling of power electronics module structures. In: 2006 8th Electronics Packaging Technology Conference (EPTC 2006) : 6-8 December 2006, Singapore. IEEE, Picsataway, N.J., pp. 214-219. ISBN 1424406641 (doi:10.1109/EPTC.2006.342718)

paper

paper fibre matrix

parallel

parallel algorithm

parallel computing

McManus, Kevin (1996) A strategy for mapping unstructured mesh computational mechanics programs onto distributed memory parallel architectures. PhD thesis, University of Greenwich.

parallel genetic algorithm

parallel processing

Jones, Beryl Wyn (1994) Mapping unstructured mesh codes onto local memory parallel architectures. PhD thesis, University of Greenwich.

PARAMARINE

partial differential equation (PDE)

partial differential equations

particle interaction

Fenech, Keith Alexander (1987) Analysing aspects of the performance of an ironblast furnace. PhD thesis, Thames Polytechnic.

particle swarm optimisation algorithm

particle swarm optimization

particle-laden flows

Kostamis, Photis (1987) Computer modelling and analysis of particulate laden gas flows. PhD thesis, Thames Polytechnic.

particulate transport

passenger exit selection

passenger response time distributions

passenger response times

Galea, Edwin R., Deere, Steven, Sharp, Gary, Filippidis, Lazaros, Lawrence, Peter and Gwynne, Steve (2007) Safety: new model for ship evacuation. The Naval Architect. pp. 8-10. ISSN 0306-0209

Pb-free solder

PC

pedestrian behaviour

pedestrian dynamics

pedestrian escalator behaviour

performance measures

personnel movement

photonics

PHYSICA

physical and theoretical fluid mechanics

Kostamis, Photis (1987) Computer modelling and analysis of particulate laden gas flows. PhD thesis, Thames Polytechnic.

physics

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

physics of failure techniques

Physics-of-failure (PoF) model

pipe

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

pipe flow

pipe fluid mechanics

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

pneumatic conveying

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

pneumatic conveyors

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

polymer

polymer cure kinetics models

polymer cure models

polymer curing

polymer encapsulant

polymer materials curing

polymers

post-crash cabin fire

post-crash fire

potting cure

Power Electronic Module (PEM)

Bailey, C., Lu, H., Yin, C. and Ridout, S. (2008) Predictive reliability, prognostics and risk assessment for power modules. In: CIPS 2008: 5th International Conference on Integrated Power Electronics Systems. Proceedings, March, 11-13, 2008 Nuremberg/Germany. ETG-Fachbericht (111). VDE Verlag GmbH, Berlin-Offenbach, Germany, pp. 19-26. ISBN 9783800730896

power electronic modules

power electronic modules (PEMs)

power electronics

power electronics module

power electronics modules

power electronics modules (PEMs)

power module components

power supply circuits

pre-evacuation time data

prediction models

Hanson, Robert (2001) A model to predict the lifetime of pneumatic conveyor bends. PhD thesis, University of Greenwich.

predictive reliability

pressure wave contours

probability based analytical tools

process efficiency

process engineering industry

process simulation

prognostic and health management (PHM)systems

prognostics prediction methodology

programming

Johnson, Stephen Philip (1992) Mapping numerical software onto distributed memory parallel systems. PhD thesis, Thames Polytechnic.

Lawrence, Peter James (1994) Mesh generation by domain bisection. PhD thesis, University of Greenwich.

property measurements

prototyping

pseudo-spectral technique

pumping machinery

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

pure mathematics

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

quasi-Newton methods

radiative fluxes

radio frequency (RF) curing

rail cab collapse

rail safety

Xue, Xiangdong, Schmid, F. and Robinson, J. (2006) Finite element modelling approach of crashworthiness of high-speed trains. In: Passive Safety of Rail Vehicles: Crashworthiness and Interior Design 6th International Symposium. Interdisciplinary Research Network Rail Technology, Berlin, pp. 99-114. ISBN 9783981079777

rail vehicle collision

rail vehicle design

Rayleigh number

reciprocating engines

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

recognition phase

rectangular microchannel

rectangular pipe

reduced order modelling (ROM)

reduced order models

reduced order models (ROM)

Stoyanov, Stoyan, Yannou, J.-M., Bailey, Christopher and Strusevitch, Nadia (2007) Reliability based design optimisation for system-in-package. In: EUROSIME 2007: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, Proceedings. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 289-296. ISBN 9781424411054 (doi:10.1109/ESIME.2007.359948)

relative permittivity

reliability

reliability management

reliability prediction

reliability prediction techniques

remelting

renewable energy

research profile

Pericleous, Kyriacos (2011) Computational science and the future. Public Service Review: UK Science and Technology, 4. pp. 26-27. ISSN 2046-5696 (Online) 2045-3884 (Print)

residual

resonant cavity

response phase

response surface models

Response Surface Models (RSM)

response time distributions

Reynolds number

Reynolds-averaged Navier-Stokes (RANS) equations

RF-ID tag bonding

Rhie-chow interpolation

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

Richard's equation

risk assessment

risk mitigation

risk perception

rotation

run time

Runge-Kutta methods

Wade, Kevin Christopher (1987) SARK: a type-insensitive Runge-Kutta code. PhD thesis, Thames Polytechnic.

Saharan dust storms

sampling

Vardoulakis, Sotirios (2002) An operational method for assessing traffic-related air pollution in urban streets. PhD thesis, University of Greenwich.

scaling effect

scaling laws

Schraudolph

sedimentation

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

segregation

semi-Lagrange time integration

semimetals

September 11 terrorist attacks

Galea, Edwin R. (2007) How has 9/11 changed the preparedness of first responders: are we ready for the next attack? In: After shock - rethinking the future since September 11, 2001: a conference held at Pace University, NYC, September 6-8 2006. Pace University Press, New York, pp. 9-29. ISBN 0944473830

sewage

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

shallow layer

shape casting

ship

ship design

ship evacuation

Galea, Edwin R., Deere, Steven, Sharp, Gary, Filippidis, Lazaros, Lawrence, Peter and Gwynne, Steve (2007) Safety: new model for ship evacuation. The Naval Architect. pp. 8-10. ISSN 0306-0209

side-by-side dies

signage

signage systems

signal processing

Johnson, Stephen Philip (1992) Mapping numerical software onto distributed memory parallel systems. PhD thesis, Thames Polytechnic.

SIMD extensions 2

simulation

simulation software

Afzal, Muhammad (1994) Mathematical modelling of gas flow networks in pellet induratlon systems. PhD thesis, University of Greenwich.

simulations

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

SiP

SiP structure

SiP technology

slag-refractory interactions

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

slurry

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

SMARTFIRE

smelting processes

Campbell, Andrew Paul (2002) Modelling of freeze layer formation and refractory wear in direct smelting process. PhD thesis, University of Greenwich.

software technology

Keye, Stefan (2003) Model updating of modal parameters from experimental data and applications in aerospace. PhD thesis, University of Greenwich.

software tools and environment

solder

solder interface strength

solder joint

solder joint failure

solder joints

solder-mask defined joints

solid state physics

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

Mason, David John (1991) A study of the modes of gas-solids flow in pipelines. PhD thesis, Thames Polytechnic.

solidification

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

solids

Fenech, Keith Alexander (1987) Analysing aspects of the performance of an ironblast furnace. PhD thesis, Thames Polytechnic.

solute diffusion

sound source extraction

spatial representation

species calculation

species concentrations

spectral code

spectral methods

square room

stacked die

staggered mesh

staggered mess

staggered methods

stair merging behavior

stcked die

steelmaking

steelmaking processes

storage

storage modulus

strain gauge

Sakaguchi, Ronald L. (1988) A biophysical analysis of the occlusal wear of dental materials. PhD thesis, Thames Polytechnic.

stress

stress analysis

Fallah, Nosrat Allah (2000) Computational stress analysis using finite volume methods. PhD thesis, University of Greenwich.

stress and strain distribution

structural bonding

structural dynamic systems

Keye, Stefan (2003) Model updating of modal parameters from experimental data and applications in aerospace. PhD thesis, University of Greenwich.

structure

Conyers, Toby Richard (1999) Automating Abell's theory of comparative narratives. PhD thesis, University of Greenwich.

substrate delamination

sun-roof

surface tension

SURFCON

survivability

survivable aviation accidents

survivor experiences

survivors

sustainable architectural design

Ji, Yan and Plainiotis, Stellios (2006) Design for sustainability. China Architecture & Building Press, Beijing. ISBN 7112083907

sustainable architecture

Ji, Yan and Plainiotis, Stellios (2006) Design for sustainability. China Architecture & Building Press, Beijing. ISBN 7112083907

sustainable design

Ji, Yan and Plainiotis, Stellios (2006) Design for sustainability. China Architecture & Building Press, Beijing. ISBN 7112083907

Swissair

Swissair flight 111

System-in-Package (SiP) structures

systematic partitioning

T-microchannel device

technology

Yin, Chunyan (2006) Experimental and modelling analysis on the performance of anisotropic conductive films as used in electronics packaging. PhD thesis, University of Greenwich.

terrorism

testing

thawing

thermal cycling

thermal cycling reliability

Loh, Wei-Sun, Corfield, Martin, Lu, Hua, Hogg, Simon, Tilford, Tim and Johnson, C. Mark (2007) Wire bond reliability for power electronic modules - effect of bonding temperature. In: EUROSIME 2007: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, Proceedings. IEEE, New York, pp. 427-432. ISBN 9781424411054 (doi:10.1109/ESIME.2007.360057)

thermal fluids

McBride, Diane (2003) Vertex-based discretisation methods for thermo-fluid flow in a finite volume-unstructured mesh context. PhD thesis, University of Greenwich.

thermal modeling

thermal resistance

thermal stresses

thermal-mechanical loading

thermo-mechanical

thermo-mechanical behaviour

thermo-mechanical reliability

thermo-mechanical reliability analysis

thermo-mechanics

thermo-physical properties

Bojarevics, Valdis and Pericleous, Koulis A. (2009) Levitated droplet oscillations: effect of internal flow. Magnetohydrodynamics, 45 (3). pp. 475-486. ISSN 0024-998X

thermodynamics

Chan, Andrew Koon Sang (1994) Free surface flow and application to the filling and solidification of liquid metals into vessels of arbitrary shape. PhD thesis, University of Greenwich.

Croft, Thomas Nicholas (1998) Unstructured mesh - finite volume algorithms for swirling, turbulent, reacting flows. PhD thesis, University of Greenwich.

McBride, Diane (2003) Vertex-based discretisation methods for thermo-fluid flow in a finite volume-unstructured mesh context. PhD thesis, University of Greenwich.

thermoelectric MHD

thermoelectricity

thermomechanical stress development

thermomigration

thermosetting polymer

thermosetting polymer materials

thickener

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

thickening

Bailey, Christopher John (1988) Multi phase numerical modelling of thickening and sedimentation. PhD thesis, Thames Polytechnic.

tilt-casting

time dependent modelling

Djambazov, G., Bojarevics, V. and Pericleous, K. (2009) Vacuum arc remelting time dependent modelling. Magnetohydrodynamics, 45 (4). pp. 579-586. ISSN 0024-998X

time to flashover

titanium alloys

titanium alumindes

Wang, Hong (2008) Numerical modelling of the tilt casting processes of titanium alumindes. PhD thesis, University of Greenwich.

titanium aluminide

titanium casting

titanium castings

titanium powder production

tooth wear

Sakaguchi, Ronald L. (1988) A biophysical analysis of the occlusal wear of dental materials. PhD thesis, Thames Polytechnic.

total variation

toxic combustion products

toxicity

Trans-Manche Atmosphere" project

travel time

turbulence models

Dhinsa, Kulvir Kaur (2006) Development and application of low Reynolds number turbulence models for air-cooled electronics. PhD thesis, University of Greenwich.

turbulence predictions

Shah, Priti (1989) Mathematical modelling of flow and combustion in internal combustion engines. PhD thesis, Thames Polytechnic.

turbulent flow

turbulent thermal losses

uncertainty analysis

uncertainty analysisfatigue life-time

undercooling

underground station

uniform random distribution

unsaturated porous media

unstructured

unstructured mesh

vacuum arc remelting (VAR)

Vacuum Arch Remelting (VAR)

Djambazov, G., Bojarevics, V. and Pericleous, K. (2009) Vacuum arc remelting time dependent modelling. Magnetohydrodynamics, 45 (4). pp. 579-586. ISSN 0024-998X

validation

valves (mechanical)

VAR

VAR process

variable frequency microwave (VFM)

variable frequency microwave (VFM) heating

Variable Frequency Microwave (VFM) system

variable frequency microwave technology

various exiting combinations

VCA

vectors

Chow, Peter M-Y (1993) Control volume unstructured mesh procedure for convection-diffusion solidification processes. PhD thesis, University of Greenwich.

velocity

Jalili, Vahid (2004) Application of CFD in designing a drug delivery mixing chamber: an experimental and computational study. PhD thesis, University of Greenwich.

video compression

viscoelastic

viscoplastic model

viscosity

visibility

visibility catchment area

visual impairment

vitiated fires

Wafer Level Packaging (WLP)

wafer processing

wafer scale level packaging

warpage

water

Alessandri, E., Buchlin, J.M. and Patel, Mayur (1996) Numerical optimisation of water curtain barriers design. Technical Report. University of Greenwich, London. (doi:1899991166)

water curtain barrier

Alessandri, E., Buchlin, J., Cavallini, A., Patel, Mayur and Galea, Edwin R. (1996) On the modelling of the thermal interactions between a spray curtain and an impinging cold gas cloud. Technical Report. University of Greenwich, London. (doi:1899991107)

water model

water movement

water pollution

Little, Stephen Nicholas (1998) The flow behaviour of non-Newtonian sludges. PhD thesis, University of Greenwich.

waveguide cavity resonator

waveguide resonator

wavelet compression

wayfinding

welding

wetting

wetting behaviours

Rizvi, Mohammed Jahir (2007) Experimental and modelling studies of electronic packaging interconnections formed with lead-free materials. PhD thesis, University of Greenwich.

Export as	RSS

About GALA

Browse Contents

Guide to Depositing in GALA

For Greenwich Depositing Authors

Quick Search on GALA

Search the University website

Items where School / Department / Research Groups is "School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis"

(CFD)

3-D computational model

3D-miniaturised systems

500 kA reduction cell

63Sn37Pb solder joints

9/11

AASK

AASK (Aircraft Accident Statistics and Knowledge)

AASK database

AC and DC fields

AC electrodynamics

AC electromagnetic field

accelerated temperature cycle

accelerated testing

accident scenarios

ACF

acoustic correction methods

acoustic emission

acoustic pertubation

acoustic wave equation

acousticcorrection

active matrix liquid crystal display

adaptive decision-making

adaptive partition

adhesive

adhesive materials

adhesives

advanced solidification processes

aeroacoustics

aerospace applications

ageing

aging

air pollution

aircraft

aircraft accident

aircraft emergency evacuation

aircraft evacuation

airEXODUS

airEXODUS evacuation simulation

airEXODUS evacuation software

algorithm

algorithms

aluminium

aluminium electrolysis

aluminium electrolysis cells

aluminium production

aluminium wirebonds

AMLCD

analysis tools

analytical models

and alloys

and failure

anisotropic conductive film

anisotropic conductive film (ACF)

applied mathematics

articulated trains

Asian American Options

assembly analysis

assembly process technology

assembly trials

atmospheric pollution

ATTMA "Aerosol Transport

Au/Ni metallization

aviation accident reports

aviation accidents

aviation safety

ball grid array (BGA)

ball shear test

Bayesian Networks (BN)

binary alloy

biofluid behaviour

biomedical engineering

block-structured mesh