Skip navigation

Items where Faculty / Department / Research Groups is "School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis > Computational Science & Engineering Group"

Items where Faculty / Department / Research Groups is "School of Computing & Mathematical Sciences > Centre for Numerical Modelling & Process Analysis > Computational Science & Engineering Group"

Up a level
Export as [feed] RSS
Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping
Number of items at this level: 430.

Aboubacar, M., Phillips, T.N., Tamaddon-Jahromi, H.R., Webster, M.K. and Williams, A.J. (2002) Numerical Simulation of Contraction Flows for Boger Fluids using Finite Volume Methods. In: Proceedings of the 6th European Conference of Rheology, (eurheo 2002). LSP, Institute of Polymer Materials, Erlangen-Nuremberg, Germany, pp. 279-280.

Alessandri, E., Buchlin, J., Cavallini, A., Patel, Mayur and Galea, Edwin R. (1996) On the modelling of the thermal interactions between a spray curtain and an impinging cold gas cloud. Technical Report. University of Greenwich, London. (doi:1899991107)

Alessandri, E., Buchlin, J.M. and Patel, Mayur (1996) Numerical optimisation of water curtain barriers design. Technical Report. University of Greenwich, London. (doi:1899991166)

Alessandri, E., Mawhinney, R.N., Patel, Mayur and Galea, Edwin R. (1996) Revisiting the carrier-phase source-term formulation in mixed Lagrangian-Eulerian particle models. Numerical Heat Transfer, Part B: Fundamentals, 30 (1). pp. 111-116. ISSN 1521-0626 (electronic) 1040-7790 (paper) (doi:10.1080/10407799608915074)

Aravinthan, V., Johnson, S.P., McManus, K., Walshaw, C. and Cross, M. (1999) Dynamic load balancing for multi-physical modelling using unstructured meshes. In: Eleventh International Conference on Domain Decomposition Methods. Domain Decomposition Methods, pp. 374-381. ISBN 82-994951-1-3

Bailey, C., Bounds, S., Cross, M., Moran, G, Pericleous, K. and Taylor, G. (1999) Multiphysics modeling and its application to the casting process. CMSE: Computer Modelling & Simulation in Engineering, 4 (3). pp. 206-212. ISSN 1083-3455

Bailey, C., Chow, P., Cross, M., Fryer, Y. and Pericleous, K. (1996) Multiphysics modelling of the metals casting process. Proceedings of the Royal Society A, 452 (1946). pp. 459-486. ISSN Online: 1471-2946 (doi:10.1098/rspa.1996.0024)

Bailey, C., Clapham, S., Cross, M., Dixon, T., Wolfe, S. and Norman, P. (1996) Modelling stress evolution during cable fabrication. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 97-100. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

Bailey, C., Patel, M. and Kumar, S. (2001) Computational modelling-a key component in materials processing. Transactions of the Institution of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 110 (1). pp. 25-32. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2001.110.1.25)

Bailey, C., Taylor, G.A., Cross, M. and Chow, P. (1999) Discretisation procedures for multi-physics phenomena. Journal of Computational and Applied Mathematics, 103 (1). pp. 3-17. ISSN 0377-0427 (doi:10.1016/S0377-0427(98)00236-2)

Bailey, C., Warner, M., Agha, A., Pericleous, K., Parry, J., Marooney, C., Reeves, H. and Clark, I. (2002) Flo/Stress: an integrated software module to predict stress in electronic products. Computing and Control Engineering Journal, 13 (3). pp. 143-148. ISSN 0956-3385 (doi:10.1049/ccej:20020306)

Bailey, Chris, Wheeler, Daniel and Cross, Mark (1998) Numerical modelling of solder joint formation. Soldering & Surface Mount Technology, 10 (2). pp. 6-13. ISSN 0954-0911 (doi:10.1108/09540919810219912)

Bailey, Christopher, Wheeler, Daniel and Cross, Mark (1999) An integrated modeling approach to solder joint formation. IEEE Transactions on Components and Packaging Technology, 22 (4). pp. 497-502. ISSN 1521-3331 (doi:10.1109/6144.814964)

Bardet, Benoit, Bojarevics, Valdis, Pericleous, Kyriacos A and Etay, Jacqueline (2006) Numerical simulation of free surface behaviour of a molten liquid metal droplet with and without electromagnetic induction. Proceedings of the 5th International Symposium on Electromagnetic Processing of Materials. The Iron and Steel Institute of Japan, Tokyo, pp. 306-310. ISBN 978-4-930980-55-7

Baxter, John, Gröger, Torsten, Abou-Chakra, Hadi, Tüzün, Ugur, Christakis, Nicholas, Patel, Mayur K. and Cross, Mark (2002) Micro-mechanical parameterisations for continuum modelling of granular material using the discrete element method. In: Fifth World Congress on Computational Mechanics (WCCM V), 7-12 Jul 2002, Vienna, Austria.

Bennett, C.R., Cross, M., Croft, T.N., Uhrie, J., Green, C. and Gebhardt, J. (2003) A comprehensive copper stockpile leach model: background and model formulation. In: Hydrometallurgy 2003. Proceedings of the Fifth International Conference. Honoring Professor Ian M. Ritchie. TMS (The Minerals, Metals & Materials Society), Pennsylvania, USA, pp. 315-328. ISBN 0873395549

Bennett, C.R., Cross, M., Uhrie, J.L., Green, C.R. and Gebhardt, J.E. (2003) A comprehensive copper stockpile leach model: background and parameter sensitivity. In: Proceedings of the Copper 2003-Cobre 2003, the 5th International Conference. Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Quebec, Canada, pp. 563-579. ISBN 1894475402

Benson, M., Bennett, C.R., Harry, J.E., Patel, M.K. and Cross, M. (2000) The recovery mechanism of platinum group metals from catalytic converters in spent automotive exhaust systems. Resources, Conservation and Recycling, 31 (1). pp. 1-7. ISSN 0921-3449 (doi:10.1016/S0921-3449(00)00062-8)

Benson, M., Bennett, C.R., Patel, M.K., Harry, J.E. and Cross, M. (2000) Collector-metal behaviour in the recovery of platinum-group metals from catalytic converters. Transactions of the Institute of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 109 (1). pp. 6-10. ISSN 0371-9553 (Print), 1743-2855 (Online) (doi:10.1179/mpm.2000.109.1.6)

Bojarevics, A., Bojarevics, V., Gelfgat, Y. and Pericleous, K. (1999) Liquid metal turbulent flow dynamics in a cylindrical container with free surface: experiment and numerical analysis. In: Proceedings of the International Colloquium Modelling of Material Processing. University of Latvia, Riga, Latvia, pp. 68-73. ISBN 9984572382

Bojarevics, A., Bojarevics, V., Gelfgat, Yu. and Pericleous, K. (1999) Liquid metal turbulent flow dynamics in a cylindrical container with free surface: experiment and numerical analysis. Magnetohydrodynamics, 35 (3). pp. 205-222. ISSN 0024-998X

Bojarevics, V. (2009) Models for magnetohydrodynamics of aluminium electrolysis cells. In: 6th International Conference on Electromagnetic Processing of Materials - EPM2009, 19-23 Oct 2009, Dresden, Germany. (Unpublished)

Bojarevics, V., Djambazov, G., Harding, R.A., Pericleous, K. and Wickins, M. (2002) Investigation of the cold crucible melting process: experimental and numerical study. In: Proceedings of the 5th International pamir Conference. Cost P6 Annual Workshop 2002. Fundamental and Applied MHD. International pamir Conference, II.77-II.82.

Bojarevics, V., Djambazov, G., Harding, R.A., Pericleous, K. and Wickins, M. (2003) Investigation of the cold crucible melting process: experimental and numerical study. Magnetohydrodynamics, 39 (4). pp. 395-402. ISSN 0024-998X

Bojarevics, V., Harding, R.A., Pericleous, K. and Wickins, M. (2004) The development and experimental validation of a numerical model of an induction skull melting furnace. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 35 (4). pp. 785-803. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-004-0019-3)

Bojarevics, V. and Pericleous, K. (2003) AC & DC magnetic levitation and semi-levitation modelling. In: Proceedings of the International Scientific Colloquium. Modelling for Electromagnetic Processing. Institute for Electronthermal Processes, University of Hannover, Hannover, Germany, pp. 99-104. ISBN 3000110739

Bojarevics, V. and Pericleous, K. (2003) AC and DC magnetic levitation: melting, fluid flow and oscillations. In: 4th International Conference on Electromagnetic Processing of Materials, 14-17 Oct 2003, Lyon, France.

Bojarevics, V. and Pericleous, K. (2006) Droplet formation with electromagnetic pulse force. In: Proceedings of the 4th International Scientific Colloquim 'Modelling for Material Processing'. University of Latvia, Laboratory for Mathematical Modelling, of Environmental and Technological Processes, Riga, Latvia, pp. 23-28. ISBN 9984783855

Bojarevics, V. and Pericleous, K. (2008) Droplet oscillations in high gradient magnetic field. Microgravity Science and Technology, 21 (1-2). pp. 119-122. ISSN 0938-0108 (Print), 1875-0494 (Online) (doi:10.1007/s12217-008-9055-y)

Bojarevics, V. and Pericleous, K. (2014) Dual frequency AC and DC magnetic field levitation melting of metals. International Journal of Applied Electromagnetics and Mechanics, 44 (2). pp. 147-153. ISSN 1383-5416 (doi:10.3233/JAE-141754)

Bojarevics, V. and Pericleous, K. (2008) Dynamic melting model for small samples in cold crucible. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 27 (2). pp. 350-358. ISSN 0332-1649 (doi:10.1108/03321640810847634)

Bojarevics, V. and Pericleous, K. (2001) Dynamics of magnetically suspended fluid. In: 6th International Symposium on Magnetic Suspension Technology [Proceedings]. ISMST, pp. 287-292.

Bojarevics, V. and Pericleous, K. (2001) Magnetic levitation fluid dynamics. Magnetohydrodynamics, 37 (1/2). pp. 93-102. ISSN 0024-998X

Bojarevics, V. and Pericleous, K. (2001) Modelling induction melting energy savings. In: Proceedings of the International Colloquium. Modelling for Saving Resources. Riga, May 17-18, 2001. Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia, Riga, Latvia, pp. 11-16. ISBN 998466189X

Bojarevics, V. and Pericleous, K. (2003) Modelling induction skull melting design modifications. In: LMPC 2003. Proceedings of the International Symposium on Liquid Metal Processing and Casting. École des Mines de Nantes, France, pp. 183-192.

Bojarevics, V. and Pericleous, K. (2004) Modelling induction skull melting design modifications. Journal of Materials Science, 39 (24). pp. 7245-7251. ISSN 0022-2461 (Print), 1573-4803 (Online) (doi:10.1023/B:JMSC.0000048738.06025.9b)

Bojarevics, V., Pericleous, K. and Cross, M. (1999) Dynamics of an axisymmetric electromagnetic ‘crucible’ melting. In: Alemany, A., Marty, Ph. and Thibault, J.P., (eds.) Transfer Phenomena in Magnetohydrodynamic and Electroconducting Flows. Selected papers of the PAMIR Conference held in Aussois, France 22–26 September 1997. Fluid Mechanics and Its Applications, Pt III (51). Springer Netherlands / Kluwer Academic Publishers, pp. 345-357. ISBN 978-94-010-6002-8 (doi:10.1007/978-94-011-4764-4_24)

Bojarevics, V., Pericleous, K. and Cross, M. (2000) Modeling the dynamics of Magnetic Semilevitation Melting. Metallurgical and Materials Transactions B, 31 (1). pp. 179-189. ISSN 1073-5623 (Print), 1543-1916 (Online) (doi:10.1007/s11663-000-0143-7)

Bojarevics, V., Pericleous, K. and Freibergs, J. (2001) Modeling the dynamics of electromagnetically agitated metallurgical flows: levitation, cold crucible, aluminium electrolysis, etc. In: Proceedings 2001 AVS International Symposium Liquid Metal Processing and Casting. American Vacuum Society, New York, USA, pp. 46-60.

Bojarevics, V., Pericleous, K., Harding, R. and Wickins, M. (2003) Induction skull-melting dynamics for different materials: numerical modeling and comparisons with experiments. In: Proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 591-598. ISBN 0873395557

Bojarevics, V., Pericleous, K., Harding, R. A. and Wickins, M. (2006) Cold crucible melting of reactive metals using combined DC and AC magnetic fields. In: 5th International Symposium on Electromagnetic Processing of Materials (EPM 2006), October 23-27, 2006, Sendai, Japan.

Bojarevics, V., Taniguchi, S. and Pericleous, K. (2006) Droplet generation with modulated AC electromagnetic field at nozzle exit. Proceedings of the 5th International Symposium on Electromagnetic Processing of Materials. The Iron and Steel Institute of Japan, Tokyo, pp. 259-270. ISBN 978-4-930980-55-7

Bojarevics, Valdis (1996) Buoyancy driven flow and its stability in a horizontal rectangular channel with an arbitrary oriented transversal magnetic field. Magnetohydrodynamics, 31 (3). pp. 245-253. ISSN 0024-998X

Bojarevics, Valdis (1998) Nonlinear waves with electromagnetic interaction in aluminium electrolysis cells. In: Branover, Herman and Unger, Yeshajahu, (eds.) Progress in Fluid Flow Research: Turbulence and Applied MHD. Progress in Astronautics and Aeronautics (182). American Institute of Aeronautics and Astronautics, Reston, VA, pp. 833-848. ISBN 1563472848 (doi:10.2514/4.866531)

Bojarevics, Valdis, Djambazov, Georgi and Pericleous, Koulis A. (2008) Vacuum arc remelting time dependent modelling. In: Baake, Egbert and Nacke, Bernard, (eds.) Proceedings of the International Scientific Colloquium, Modelling for Electromagnetic Processing, Hannover, 27-29 October, 2008. Leibniz University of Hannover, Hannover, Germany, pp. 25-28. ISBN 978-3-00-026003-2

Bojarevics, Valdis, Djambazov, Georgi S. and Pericleous, Koulis A. (2015) Contactless ultrasound generation in a crucible. Metallurgical and Materials Transactions A, 46A (7). pp. 2884-2892. ISSN 1073-5623 (Print), 1543-1940 (Online) (doi:10.1007/s11661-015-2824-5)

Bojarevics, Valdis, Easter, S., Roy, A. and Pericleous, Koulis A. (2009) Levitated liquid droplets in AC and DC magnetic field. In: Lee, Peter D., Mitchell, Alec and Williamson, Rod, (eds.) International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 319-326. ISBN 978-0-87339-743-8

Bojarevics, Valdis and Evans, James W. (2012) An application of the inverse solution for electric current distribution from magnetic field measurements in aluminium electrolysis cells. Journal of Iron and Steel Research International, 19 (S1-1). pp. 561-565. ISSN 1006-706X

Bojarevics, Valdis and Pericleous, Koulis (2003) Modelling electromagnetically levitated liquid droplet oscillations. ISIJ International, 43 (6). pp. 890-898. ISSN 0915-1559 (Print), 1347-5460 (Online) (doi:10.2355/isijinternational.43.890)

Bojarevics, Valdis and Pericleous, Koulis (2006) Time dependent electric, magnetic and hydrodynamic interaction in aluminium electrolysis cells. In: Fifth International Conference on CFD in the Process Industries [Proceedings]. CFD Online. ISBN 0643094237

Bojarevics, Valdis and Pericleous, Koulis A. (2008) Levitated droplet oscillations: effect of internal flow. Proceedings of the 7th International PAMIR Conference: Fundamental and Applied MHD and COST P17 Annual Workshop 2008. Institute of Physics, University of Latvia, Salaspils, Latvia, pp. 159-164.

Bojarevics, Valdis and Pericleous, Koulis A. (2009) Levitated droplet oscillations: effect of internal flow. Magnetohydrodynamics, 45 (3). pp. 475-486. ISSN 0024-998X

Bojarevics, Valdis and Pericleous, Koulis A. (2007) Liquid metal induction heating modelling for cold crucible applications. International Journal of Materials and Product Technology, 29 (1-4). pp. 70-83. ISSN 0268-1900 (doi:10.1504/IJMPT.2007.013131)

Bojarevics, Valdis and Pericleous, Koulis A. (2007) Numerical modelling for electromagnetic processing of materials. In: Molokov, Sergei S., Moreau, R. and Moffatt, H. Keith, (eds.) Magnetohydrodynamics: historical evolution and trends. Fluid Mechanics and Its Applications, 80 (4). Springer Netherlands, Dordrecht, pp. 357-374. ISBN 9781402048326 (doi:10.1007/978-1-4020-4833-3)

Bojarevics, Valdis and Pericleous, Koulis A. (2008) Shallow water model for aluminium electrolysis cells with variable top and bottom. In: DeYoung, David H., (ed.) Light Metals 2008: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the Tms 2008 Annual Meeting and Exhibition, New Orleans, Louisiana, USA. TMS (The Minerals, Metals & Materials Society), Warrendale, PA, USA, pp. 403-408. ISBN 9780873397100

Bojarevics, Valdis and Pericleous, Kyriacos (2012) Modelling magnetically excited and magnetically damped liquid metal flow. In: Nastac, Laurentiu, Zhang, Lifeng, Thomas, Brian G., Sabau, Adrian, El-Kaddah, Nagy, Powell, Adam C. and Combeau, Herve, (eds.) CFD Modeling and Simulation in Materials. J. Wiley & Sons Inc, USA, pp. 245-252. ISBN 978-1-1182-9615-8 : 111829615X

Bojarevics, Valdis, Roy, A., Easter, S. and Pericleous, Koulis A. (2009) Magnetic damping of levitated liquid droplets in AC and DC field. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Bounds, S., Moran, G., Pericleous, K., Cross, M. and Croft, T.N. (2000) A computational model for defect prediction in shape castings based on the interaction of free surface flow, heat transfer, and solidification phenomena. Metallurgical and Materials Transactions B, 31 (3). pp. 515-527. ISSN 1073-5623 (Print), 1543-1916 (Online) (doi:10.1007/s11663-000-0157-1)

Burton, D.J., Grandison, Angus, Patel, Mayur, Galea, Edwin R. and Ewer, John (2007) Introducing a hybrid field/zone modelling approach for fire simulation. Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications, Greenwich, pp. 1491-1497. ISBN 9780954121693

Campbell, A.P., Pericleous, K.A. and Cross, M. (2002) Modeling of freeze layers and refractory wear in direct smelting processes. Iron & Steel Maker, 29 (9). pp. 41-45. ISSN 0275-8687

Campbell, Andrew P., Pericleous, Koulis A. and Cross, Mark (2002) Computational modelling of freeze layers in smelting processes. In: 2002 TMS Annual Meeting & Exhibition, 18-21 Feb 2002, Seattle, WA, USA.

Cao, Jianwen and Lai, Choi-Hong (2002) Numerical experiments of some Krylov subspace methods for black oil model. Computers & Mathematics with Applications, 44 (1-2). pp. 125-141. ISSN 0898-1221 (doi:10.1016/S0898-1221(02)00135-9)

Chan, K. S., Pericleous, Kyriacos and Cross, Mark (1991) Numerical simulation of flows encountered during mold-filling. Applied Mathematical Modelling, 15 (11-12). pp. 624-631. ISSN 0307-904X (doi:10.1016/S0307-904X(09)81008-1)

Chapelle, P., Christakis, N., Abou-Chakra, H., Tuzun, U., Bridle, I., Bradley, M.S.A., Patel, M.K. and Cross, M. (2003) Computational modelling of particle degradation in dilute phase pneumatic conveyors. In: Kumar, Vipin, Gavrilova, Marina L., Tan, Chih Jeng Kenneth and L’Ecuyer, Pierre, (eds.) Computational Science and Its Applications - ICCSA 2003. International Conference Montreal, Canada, May 18–21, 2003 Proceedings. Lecture Notes in Computer Science, Part I (2667). Springer, Berlin Heidelberg, pp. 493-502. ISBN 9783540401551 (doi:10.1007/3-540-44839-X_53)

Chapelle, P., Christakis, N., Wang, J., Strusevich, N., Patel, M.K., Cross, M., Abou-Chakra, H., Baxter, J. and Tuzun, U. (2005) Application of simulation technologies in the analysis of granular material behaviour during transport and storage. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 219 (1). pp. 43-52. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440805X7044)

Chapelle, Pierre, Abou-Chakra, Hadi, Christakis, Nicholas, Patel, Mayur, Abu-Nahar, Azlina, Tüzün, Ugur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute phase pneumatic conveying: the use of a laboratory scale degradation tester for the determination of degradation propensity. Advanced Powder Technology, 15 (1). pp. 13-29. ISSN 0921-8831 (doi:10.1163/15685520460740043)

Chapelle, Pierre, Christakis, Nicholas, Abou-Chakra, Hadi, Bridle, Ian, Bradley, M.S.A., Patel, Mayur and Cross, Mark (2004) Computational model for prediction of particle degradation during dilute-phase pneumatic conveying: modeling of dilute-phase pneumatic conveying. Advanced Powder Technology, 15 (1). pp. 31-49. ISSN 0921-8831 (Print), 1568-5527 (Online) (doi:10.1163/15685520460740052)

Chen, Fei, Wang, Mei-quing and Lai, Choi-Hong (2008) An algorithm for total variation inpainting based on nonlinear multi-grid methods. Journal of Algorithms & Computational Technology, 2 (1). pp. 15-33. ISSN 1748-3018 (doi:10.1260/174830108784300303)

Chen, Ke and Lai, Choi H. (2002) Parallel algorithms of the Purcell method for direct solution of linear systems. Parallel Computing, 28 (9). pp. 1275-1291. ISSN 0167-8191 (doi:10.1016/S0167-8191(02)00133-3)

Cheung, C.W. and Lai, C-H. (2001) On a flexible elimination algorithm with applications to panel element equations. IMA Journal of Numerical Analysis, 21 (2). pp. 603-619. ISSN 0272-4979 (Print), 1464-3642 (Online) (doi:10.1093/imanum/21.2.603)

Chow, P., Bailey, C., Cross, M. and Pericleous, K.A. (1996) The numerical modelling of multi-physics phenomena: The shape casting process. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 101-104. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

Chow, P., Cross, Mark and Pericleous, Koulis A. (1996) A natural extension of the conventional finite volume method into polygonal unstructured meshes for CFD application. Applied Mathematical Modelling, 20 (2). pp. 170-183. ISSN 0307-904X (doi:10.1016/0307-904X(95)00156-E)

Chow, Peter and Lai, Choi-Hong (2004) Collaborating components in mesh-based electronic packaging. Scientific Programming, 12 (2). pp. 65-70. ISSN 1058-9244 (Print), 1875-919X (Online)

Chow, Peter and Lai, Choi-Hong (2005) Electronic packaging and reduction in modelling time using domain decomposition. In: Barth, Timothy J., Griebel, Michael, Keyes, David E., Nieminen, Risto M., Roose, Dirk, Schlick, Tamar, Kornhuber, Ralf, Hoppe, Ronald, Périaux, Jacques, Pironneau, Olivier, Widlund, Olof and Xu, Jinchao, (eds.) Domain Decomposition Methods in Science and Engineering. Lecture Notes in Computational Science and Engineering, IV (40). Springer, Berlin Heidelberg, pp. 193-200. ISBN 9783540225232 (doi:10.1007/3-540-26825-1_16)

Christakis, N., Chapelle, P. and Patel, M.K. (2006) A computational study of segregation in granular material during heaping. In: 2006 Spring Meeting & 2nd Global Congress on Process Safety. American Institute of Chemical Engineers, New York, USA. ISBN 9780816910755

Christakis, N., Chapelle, Pierre and Patel, M. K. (2006) Analysis and modeling of heaping behavior of granular mixtures within a computational mechanics framework. Advanced Powder Technology, 17 (4). pp. 383-398. ISSN 0921-8831 (doi:10.1163/156855206777866173)

Christakis, N., Patel, M.K., Cross, M., Baxter, J., Abou-Chakra, H. and Tüzün, U. (2001) Continuum modelling of granular flows using PHYSICA, a 3-D unstructured, finite-volume code. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 129-138. ISBN 0873395131

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur, Cross, Mark, Bridle, Ian, Abou-Chakra, Hadi and Baxter, John (2002) Utilising computational fluid dynamics (CFD) for the modelling of granular material in large-scale engineering processes. In: Computational Science - ICCS 2002: International Conference Amsterdam, The Netherlands, April 21–24, 2002 Proceedings. Lecture Notes in Computer Science, Part 1 (2329). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 743-752. ISBN 9783540435914 ISSN 0302-9743 (Print), 1611-3349 (Online) (doi:10.1007/3-540-46043-8_75)

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K. and Cross, Mark (2006) On the continuum modelling of segregation of granular mixtures during hopper emptying in core flow mode. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. TU Delft, The Netherlands, The Netherlands. ISBN 9090209700

Christakis, Nicholas, Chapelle, Pierre, Patel, Mayur K., Wang, Junye, Cross, Mark, Baxter, John, Gröger, Torsten, Abou-Chakra, Hadi, Tüzün, Ugur, Bridle, Ian and Leaper, Mark C. (2002) Mathematical modelling of the behaviour of granular material in a computational fluid dynamics framework using micro-mechanical models. In: 5th World Congress on Computational Mechanics (WCCM V), 7-12 Jul 2002, Vienna, Austria.

Christakis, Nicholas, Patel, Mayur and Cross, Mark (2000) On the continuum modelling of granular flows with the aid of micro-mechanical parametrisations. In: 8th Annual Conference of the Association for Computational Mechanics in Engineering (ACME 2000), 16-19 April 2000, University of Greenwich, London, UK.

Christakis, Nicholas, Patel, Mayur and Cross, Mark (2001) Predictions of Segregation of Granular Material with the Aid of PHYSICA, a 3-D Unstructured Finite-Volume Modelling Framework. In: ICFD Conference on Numerical Methods for Fluid Dynamics, 26-29 March 2001, Oxford, UK.

Christakis, Nicholas, Patel, Mayur K., Cross, Mark, Baxter, John, Abou-Chakra, Hadi and Tuzun, Ugur (2002) Predictions of segregation of granular material with the aid of PHYSICA, a 3-D unstructured finite-volume modelling framework. In: International Journal for Numerical Methods in Fluids. Special Issue: ICFD Conference on Numerical Methods for Fluid Dynamics. John Wiley & Sons, Ltd., pp. 281-291. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.319)

Clarke, Nigel and Parrott, Kevin (1999) Multigrid for American option pricing with stochastic volatility. Applied Mathematical Finance, 6 (3). pp. 177-195. ISSN 1350-486X (Print), 1466-4313 (Online) (doi:10.1080/135048699334528)

Croft, T.N., Pericleous, K.A., Bobadilla, M. and Gardin, P. (2002) Three-phase computations of the continuous casting process. In: Proceedings of the 4th European Continuous Casting Conference. IOM Communications Ltd, London, England, UK, pp. 545-554.

Cross, M., Croft, T. N., Djambazov, G. and Pericleous, K. (2006) Computational modelling of bubbles, droplets and particles in metals reduction and refining. Applied Mathematical Modelling, 3. pp. 1445-1458. ISSN 0307-904X (doi:10.1016/j.apm.2006.03.007)

Cross, M., Croft, T. N., McBride, D., Slone, A. K., Williams, A. J., Bailey, C. and Pericleous, K. (2006) Computational fluid dynamics: advancements in technology for modeling iron and steelmaking processes. AIST Transactions - Iron and Steel Technology, 3 (7). pp. 155-163. ISSN 1547-0423

Cross, M., Croft, T.N., Djambazov, G. and Pericleous, K. (2003) Computational modelling of bubbles, droplets and particles in metals reduction and refining. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 47-52. ISBN 978064309038X

Cross, M., Lyster, C, Bailey, C., Croft, N., Ewer, J., Leggett, P., McManus, K., Pericleous, K.A. and Patel, M.K. (1996) PHYSICA - A software environment for the modelling of multi-physics phenomena. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 105-108. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

Cross, M., McBride, D., Croft, T.N., Williams, A.J., Pericleous, K. and Lawrence, J.A. (2006) Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved. Metallurgical and Materials Transactions B, 37 (6). pp. 879-885. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/BF02735009)

Cross, M., McManus, K., Johnson, S.P., Ierotheou, C.S., Walshaw, C., Bailey, C. and Pericleous, K.A. (1999) Computational modelling of multi-physics processes on high performance parallel computer systems. In: Allan, R.J., Guest, M.F., Simpson, A.D., Henty, D.S. and Nicole, D.A., (eds.) High-Performance Computing. Springer US, pp. 91-102. ISBN 978-0-306-46034-0 (doi:10.1007/978-1-4615-4873-7_10)

Cross, M., Walshaw, C., Williams, A., Slone, A., Croft, T. and McManus, K. (2003) Parallel processing for non-linear problems. In: VII International Conference on Computational Plasticity, 7-10 Apr 2003, Barcelona.

Cross, M., Williams, A., Bailey, C., Taylor, G.A., Pericleous, K. and Croft, T.N. (2000) Towards a comprehensive model of the direct chill casting process. In: Modeling of Casting, Welding and Advanced Solidification Processes IX [Proceedings]. Shaker, Aachen, Germany, pp. 713-720. ISBN 3826572300

Cross, Mark (1996) Computational issues in the modelling of materials-based manufacturing processes. Journal of Computer-Aided Materials Design, 3 (1-3). pp. 100-116. ISSN 0928-1045 (Print), 1573-4900 (Online) (doi:10.1007/BF01185643)

Cross, Mark (1996) Modelling of industrial multi-physics processes—a key role for computational mechanics. IMA Journal of Mathematics for Business and Industry, 7 (1). pp. 3-21. ISSN 0953-0061 (doi:10.1093/imaman/7.1.3-a)

Cross, Mark, Bailey, Christopher, Pericleous, Koulis, Williams, Alison, Bojarevics, Valdis, Croft, Nick and Taylor, Gary (2002) The multiphysics modeling of solidification and melting processes. JOM (The Member Journal of The Minerals, Metals & Materials Society), 2002 (Supp.). ISSN 1047-4838

Cross, Mark and Blot, Philippe (1999) Optimizing the operation of straight-grate iron-ore pellet induration systems using process models. Metallurgical and Materials Transactions B, 30 (4). pp. 803-813. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-999-0042-5)

Cross, Mark, Croft, Nick, Slone, Avril, Williams, Alison, Christakis, Nicholas, Patel, Mayur, Bailey, Christopher and Pericleous, Koulis A. (2007) Computational modelling of multi-physics and multi-scale processes in parallel. International Journal for Computational Methods and Engineering Science and Mechanics, 8 (2). pp. 63-74. ISSN 1550-2287 (doi:10.1080/15502280601149510)

Cross, Mark, Stoyanov, Stoyan, Mouchmov, Apostol, Lu, Hua, Croft, Nick, Slone, Avril, Williams, Alison, Bailey, Chris and Pericleous, Koulis (2003) Multi-physics-multi-scale simulation and optimisation: the next generation. In: NAFEMS World Congress, 2003, Orlando, Florida, USA.

Davies, A.J., Crann, Diane, Kane, S.J. and Lai, Choi-Hong (2007) A hybrid Laplace transform/finite difference boundary element method for diffusion problems. Computer Modelling in Engineering and Sciences, 18 (2). pp. 79-86. ISSN 1526-1492

Davis, Mark, Pericleous, Koulis, Cross, Mark and Schwartz, Philip (1998) Mathematical modelling tools for optimisation of direct smelting processes. Applied Mathematical Modelling, 22 (11). pp. 921-940. ISSN 0307-904X (doi:10.1016/S0307-904X(98)10037-9)

Deng, T., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor. Wear, 258 (1-4). pp. 480-487. ISSN 0043-1648 (doi:10.1016/j.wear.2004.08.001)

Deng, T., Li, J., Chaudhry, A.R., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials. Wear, 258 (1-4). pp. 402-411. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.012)

Deng, T., Patel, M., Hutchings, I. and Bradley, M.S.A. (2004) Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors. Wear, 258 (1-4). pp. 426-433. ISSN 0043-1648 (doi:10.1016/j.wear.2004.02.010)

Dhinsa, K., Bailey, C. and Pericleous, K. (2003) Accuracy of turbulence models and CFD for thermal characterisation of electronic systems. In: Proceedings of 5th Conference Electronics Packaging Technology (EPTC 2003). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 507-512. ISBN 0780382056 (doi:10.1109/EPTC.2003.1271573)

Dhinsa, K., Bailey, C. and Pericleous, K. (2004) Investigation into the performance of turbulence models for fluid flow and heat transfer phenomena in electronic applications. In: 2004 Proceedings, Twentieth IEEE Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM). Institute of Electrical and Electronics Engineers, Inc,, Piscataway, NJ, USA, pp. 278-285. ISBN 078038363X ISSN 1065-2221 (doi:10.1109/STHERM.2004.1291335)

Dhinsa, K., Bailey, C. and Pericleous, K. (2004) Low Reynolds number turbulence models for accurate thermal simulations of electronic components. In: Proceedings of the 5th International Conference on Thermal and Mechanical Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2004. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 483-490. ISBN 0780384202 (doi:10.1109/ESIME.2004.1304081)

Dhinsa, K., Bailey, C. and Pericleous, K. (2003) Turbulence modelling and its effects on electronic systems. In: Turbulence, Heat and Mass Transfer 4. Begell House, New York, USA. Oxfordshire, UK, pp. 625-632. ISBN 1567001963

Dhinsa, K., Bailey, C. and Pericleous, K. (2004) Turbulence modelling for thermal management of electronic systems. In: 12th Association of Computational Mechanics in Engineering Annual Conference (ACME 2004), 5-6 April 2004, Cardiff, Wales, UK. (Unpublished)

Dhinsa, Kulvir, Bailey, Chris and Pericleous, Koulis (2005) Investigation into the performance of turbulence models for fluid flow and heat transfer phenomena in electronic applications. IEEE Transactions on Components and Packaging Technologies, 28 (4). pp. 686-699. ISSN 1521-3331 (doi:10.1109/TCAPT.2005.859758)

Dhinsa, Kulvir K., Bailey, Chris J. and Pericleous, Koulis A. (2004) Turbulence modelling and its impact on CFD predictions for cooling of electronic components. In: The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (ITHERM 2004) [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 487-494. ISBN 0780383575 ISSN 1089-9870 (doi:10.1109/ITHERM.2004.1319214)

Dinčov, D.D., Parrott, K.A. and Pericleous, K.A. (2004) Heat and mass transfer in two-phase porous materials under intensive microwave heating. Journal of Food Engineering, 65 (2). pp. 403-412. ISSN 0260-8774 (doi:10.1016/j.jfoodeng.2004.02.011)

Dinčov, D.D., Parrott, K.A. and Pericleous, K.A. (2004) A new computational approach to microwave heating of two-phase porous materials. International Journal of Numerical Methods for Heat & Fluid Flow, 14 (6). pp. 783-802. ISSN 0961-5539 (doi:10.1108/09615530410544319)

Dinčov, Duško D., Parrott, Kevin A. and Pericleous, Koulis A. (2002) Coupled 3-D finite difference time domain and finite volume methods for solving microwave heating in porous media. In: Sloot, Peter A., Hoekstra, Alfons G., Tan, C.J. Kenneth and Dongarra, Jack J., (eds.) Computational Science - ICCS 2002: International Conference Amsterdam, The Netherlands, April 21–24, 2002 Proceedings. Lecture Notes in Computer Science, I (2329). Springer-Verlag, Berlin, Heidelberg, Germany, pp. 813-822. ISBN 9783540435914 (doi:10.1007/3-540-46043-8_82)

Djambazov, G., Bojarevics, V. and Pericleous, K. (2009) Vacuum arc remelting time dependent modelling. Magnetohydrodynamics, 45 (4). pp. 579-586. ISSN 0024-998X

Djambazov, G., Bojarevics, V., Pericleous, K. and Croft, N. (2015) Finite volume solutions for electromagnetic induction processing. Applied Mathematical Modelling, 39 (16). pp. 4733-4745. ISSN 0307-904X (doi:10.1016/j.apm.2015.03.059)

Djambazov, G., Lai, C.-H. and Pericleous, K. (1999) Development of numerical techniques for near-field aeroacoustic computations. International Journal for Numerical Methods in Fluids, 29 (6). pp. 719-731. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/(SICI)1097-0363(19990330)29:6<719::AID-FLD810>3.0.CO;2-P)

Djambazov, G.S., Lai, C.-H. and Pericleous, K.A. (2000) On the coupling of Navier–Stokes and linearised Euler equations for aeroacoustic simulation. Computing and Visualisation in Science, 3 (1-2). pp. 9-12. ISSN 1432-9360 (Print), 1433-0369 (Online) (doi:10.1007/s007910050045)

Djambazov, G.S., Lai, C.-H. and Pericleous, K.A. (2000) Staggered-mesh computation for aerodynamic sound. American Institute of Astronautics and Aeronautics Journal (AIAA Journal), 38 (1). pp. 16-21. ISSN 0001-1452 (Print), 1533-385X (Online) (doi:10.2514/2.948)

Djambazov, G.S., Lai, C.-H., Pericleous, K.A. and Wang, Z.-K. (2002) A coarse grid extraction of sound signals for computational aeroacoustics. International Journal for Numerical Methods in Fluids, 40 (12). pp. 1515-1525. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.408)

Djambazov, George Stefanov, Bailey, Chris, Patel, Mayur K. and Shrimpton, Jennifer (2004) Numerical simulation of vacuum dezincing of lead alloy. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

Djambazov, Georgi, Pericleous, Koulis A. and Bojarevics, Valdis (2009) Effect of varying electromagnetic field on the VAR process. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Djambazov, Georgi S., Lai, Choi-Hong and Pericleous, Koulis A. (1998) Efficient computation of aerodynamic noise. In: Mandel, Jan, Farhat, Charbel and Cai, Xiao-Chuan, (eds.) Domain Decomposition Methods. Contemporary Mathematics, 10 (218). American Mathematical Society, Providence, Rhode Island, USA, pp. 500-506. ISBN 9780821809884 (doi:10.1090/conm/218)

Djambazov, Georgi S., Lai, Choi-Hong, Pericleous, Koulis A. and Wang, Zong-Kang (2002) A defect correction method for multi-scale problems in computational aeroacoustics. In: Recent Developments in Domain Decomposition Methods. Lecture Notes in Computational Science and Engineering (23). Springer, Berlin, Heidelberg, Germany, pp. 147-156. ISBN 9783540434139 ISSN 1439-7358

Djambazov, Georgi S. and Pericleous, Koulis A. (2009) Choosing the appropriate level of coupling in multi-physics modeling of metallurgical processes. AIP Conference Proceedings: Applications of Mathematics in Engineering and Economics (AMEE '09): Proceedings of the 35th International Conference, 1184 (1). pp. 24-31. ISSN 0094-243X (Print), 1551-7616 (Online) (doi:10.1063/1.3271622)

Doh, Y., Chapelle, P., Jardy, A., Djambazov, G., Pericleous, K., Ghazal, G. and Gardin, P. (2013) Toward a full simulation of the basic oxygen furnace: Deformation of the bath free surface and coupled transfer processes associated with the post-combustion in the gas region. Metallurgical and Materials Transactions B, 44 (3). pp. 653-670. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-013-9817-9)

Dracopoulos, M., Parrott, K., Molinari, G., Nervi, M. and Simkin, J. (1997) Results of parallelisation of existing electromagnetic finite codes on some different parallel architectures. Applied Computational Electromagnetics Society Journal, 12 (2). pp. 107-112. ISSN 1054-4887

Dracopoulos, Mike C., Glasgow, Craig, Parrott, A. Kevin, Janssen, Rick, Alotto, Pergiorgio and Simkin, John (1997) Bulk synchronous parallelization of industrial electromagentic software. International Journal of High Performance Computing Applications, 11 (4). pp. 344-358. ISSN 1078-3482 (Print), 1741-2846 (Online) (doi:10.1177/109434209701100408)

Dupuis, M. and Bojarevics, V. (2006) Busbar sizing modeling tools: comparing an ANSYS® based 3D model with the versatile 1D model part of MHD-Valdis. In: Light Metals 2006. The Minerals, Metals & Materials Society (TMS), Warrendale, Pennsylvania, USA, pp. 341-346. ISBN 9780873396196

Dupuis, M., Bojarevics, V. and Freibergs, J. (2010) Demonstration of thermo-electric and MHD mathematical models of a 500 kA aluminum electrolysis cell: part 2. In: Light Metals 2004. John Wiley & Sons, Inc., Hoboken, NJ, USA, pp. 453-459. ISBN 9780470952948

Dupuis, M., Bojarevics, V. and Freibergs, J. (2003) Demonstration thermo-electric and MHD mathematical models of a 500 kA A1 electrolysis cell. In: Light metals 2003: proceedings of the International Symposium : August 24-27, 2003, Vancouver, British Columiba, Canada. Metallurgical Society of CIM ( MetSoc ), Montreal, QC Canada, pp. 3-20. ISBN 1894475453

Dupuis, M., Bojarevics, V. and Richard, D. (2006) MHD and pot mechanical design of a 740 kA cell. Aluminium : international journal for industry, research and application, 82 (5). pp. 442-446. ISSN 0002-6689

Dupuis, Marc, Bojarevics, Valdis and Richard, Daniel (2008) Impact of the vertical potshell deformation on the MHD cell stability behavior of a 500 kA aluminium electrolysis cell. In: DeYoung, David H., (ed.) Light Metals 2008. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 409-412. ISBN 978-0-87339-710-0

Easter, S., Bojarevics, V. and Pericleous, K. (2011) Numerical modelling of liquid droplet dynamics in microgravity. Journal of Physics: Conference Series (JPCS), 327 (1):012027. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/327/1/012027)

Easter, S., Bojarevics, Valdis and Pericleous, Koulis A. (2009) Determining surface tension using DC magnetic levitation. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Edussuriya, S.S., Williams, A.J. and Bailey, C. (2002) A CFD study of the underfill encapsulation process in flip-chip packaging using the Oldroyd-B model. In: Proceedings of the 6th European Conference of Rheology, (eurheo 2002). LSP, Institute of Polymer Materials, Erlangen-Nuremberg, Germany, pp. 285-286.

Edussuriya, S.S., Williams, A.J. and Bailey, C. (2004) A cell-centred finite volume method for modelling viscoelastic flow. Journal of Non-Newtonian Fluid Mechanics, 117 (1). pp. 47-61. ISSN 0377-0257 (doi:10.1016/j.jnnfm.2003.12.001)

El-Radhi, A. Sahib, Barry, William and Patel, Swatee (1999) Association of fever and severe clinical course in bronchiolitis. Archives of Diseases in Childhood, 81 (3). pp. 231-234. ISSN 0003-9888 (Print), 1468-2044 (Online) (doi:10.1136/adc.81.3.231)

Evans, E.W., Johnson, S.P., Leggett, P.F. and Cross, M. (2000) Automatic and effective multi-dimensional parallelisation of structured mesh based codes. Parallel Computing, 26 (6). pp. 677-703. ISSN 0167-8191 (doi:10.1016/S0167-8191(00)00004-1)

Evans, E.W., Johnson, S.P., Leggett, P.F. and Cross, M. (1997) Automatic code generation of overlapped communications in a parallelisation tool. Parallel Computing, 23 (10). pp. 1493-1523. ISSN 0167-8191 (doi:10.1016/S0167-8191(97)00069-0)

Evans, E.W., Johnson, S.P., Leggett, P.F. and Cross, M. (1998) Automatic generation of multi-dimensionally partitioned parallel CFD code in a parallelisation tool. In: Parallel Computational Fluid Dynamics. Recent Developments and Advances Using Parallel Computers. Proceedings of the Parallel CFD '97 Conference, Manchester, U.K. (May 19-21, 1997). Elsievier, Amsterdam, pp. 531-538. ISBN 0444828494

Ewer, J., Galea, E.R., Knight, B., Patel, M., Janes, D. and Petridis, M. (1998) Fire field modelling using the SMARTFIRE automated dynamic solution control environment. CMS Press, Greenwich, London, UK. ISBN 1899991387

Ewer, J., Galea, E.R., Patel, M.K., Taylor, S., Knight, B. and Petridis, M. (1999) SMARTFIRE: an intelligent CFD based fire model. Journal of Fire Protection Engineering, 10 (1). pp. 13-27. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/104239159901000102)

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (1999) The development and application of group solvers in the SMARTFIRE fire field model. In: Conference Proceedings: Interflam 1999: 8th International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 939-950. ISBN 0953231232

Ewer, J.A.C., Galea, E.R., Patel, M.K. and Knight, B. (2000) The development of group solvers in the SMARTFIRE fire field model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 54-57. ISBN 1861661509

Fallah, N.A., Bailey, C. and Cross, M. (2000) CFD approach for solid mechanics analysis. In: European Congress on Computational Methods in Applied Sciences and Engineering. ECCOMAS 2000. [Proceedings]. ECCOMAS.

Fallah, N.A., Bailey, C., Cross, M. and Taylor, G.A. (2000) Comparison of finite element and finite volume methods application in geometrically nonlinear stress analysis. Applied Mathematical Modelling, 24 (7). pp. 439-455. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00047-5)

Ferenets, M., Tilford, Tim, Sinclair, Keith I., Bailey, Christopher and Desmulliez, Marc P.Y. (2009) Microwave curing of thermosetting polymer materials in microelectronics applications. In: Baltic Polymer Symposium 2009, 22-25 September 2009, Ventspils, Latvia.

Frost, Ian, Patel, Mayur, Galea, Edwin R., Rymacrzyk, P. and Mawhinney, Robert (2001) A semi-automated approach to CAD input into field based fire modelling tools. In: Conference Proceedings: Interflam 2001: 9th International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 1421-1426. ISBN 1899991832

Galea, E. (2006) CFD fire simulation of the Swissair flight 111 in-flight fire – Part 1: Prediction of the pre-fire air flow within the cockpit and surrounding areas. The Aeronautical Journal, 110 (1103). ISSN 0001-9240

Gardin, P., Brunet, M., Domgin, J.F. and Pericleous, K. (2002) An experimental and numerical CFD study of turbulence in a tundish container. Applied Mathematical Modelling, 26 (2). pp. 323-336. ISSN 0307-904X (doi:10.1016/S0307-904X(01)00064-6)

Glinski, G.P., Bailey, C. and Pericleous, K.A. (2001) A non-Newtonian computational fluid dynamics study of the stencil printing process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 215 (4). pp. 437-446. ISSN 0954-4062 (Print), 2041-2983 (Online) (doi:10.1243/0954406011520869)

Goussetis, George, Sinclair, Keith I., Sangster, Alan J., Desmulliez, Marc P.Y., Tilford, Tim, Parrott, Kevin and Bailey, Christopher (2007) Microwave curing for high density package. 2007 International Symposium on High Density Design Packaging and Microsystem Integration. Institute of Electrical and Electronics Engineers, Inc., New York, p. 1. ISBN 9781424412525 (doi:10.1109/HDP.2007.4283552)

Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2004) The development of parallel implementation for a CFD based fire field model utilising conventional office based PCs. Journal of Applied Fire Science, 12 (2). pp. 137-157. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/AGH5-EXUR-J110-HPHE)

Grandison, Angus, Galea, Edwin R., Patel, Mayur and Ewer, John (2007) Parallel CFD fire modelling on office PCs with dynamic load balancing. International Journal for Numerical Methods in Fluids, 55 (1). pp. 29-39. ISSN 0271-2091 (doi:10.1002/fld.1278)

Grandison, Angus, Galea, Edwin R., Patel, Mayur and Ewer, John (2006) A suggested procedure for benchmarking fire field models. International Journal on Engineering Performance-Based Fire Codes, 8 (4). pp. 132-144. ISSN 1561-9559

Grossman, D., Bailey, C., Pericleous, K. and Slone, A. (2002) Computational modelling of blood flow and artery wall interaction. In: FEM Workshop 2002 [Proceedings]. University of Ulm, Germany, Ulm, Germany, pp. 88-94. ISBN 39806183558

Guo, Q., Shen, D., Guo, Y. and Lai, Choi-Hong (2007) Parallel genetic algorithms for the solution of inverse heat conduction problems. International Journal of Computer Mathematics, 84 (2). pp. 241-250. ISSN 0020-7160 (doi:10.1080/00207160601169967)

Gwyer, D., Bailey, C., Pericleous, K., Philpott, D. and Misselbrook, P. (2002) Mathematical modelling: a laser soldering process for an optoelectronics butterfly package. In: ITHERM 2002. The Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 121-127. ISBN 0780371526 ISSN 1089-9870 (doi:10.1109/ITHERM.2002.1012447)

Gwyer, D., Bailey, C., Pericleous, K., Philpott, D. and Misselbrook, P. (2003) Modelling the assembly and performance of optoelectronic packages. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-electronics and Micro-systems. Proceedings of EuroSimE 2003. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 77-85. ISBN 0780370546

Hanson, R., Allsopp, D., Deng, T., Smith, D., Bradley, M.S.A., Hutchings, I.M. and Patel, M.K. (2002) A model to predict the life of pneumatic conveyor bends. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 216 (3). pp. 143-149. ISSN 0954-4089 (Print), 2041-3009 (Online) (doi:10.1243/095440802320225284)

Harding, R. A., Wickins, M, Bojarevics, Valdis and Pericleous, Kyriacos (2003) Obtaining data to validate a model of an induction skull melting furnace. In: Modeling of Casting, Welding and Advanced Solidification Processes. TMS, Destin, FL, pp. 741-748. ISBN 0873395557

Harding, R.A., Wickins, M., Wang, H., Djambazov, G. and Pericleous, K. (2007) The tilt casting of titanium aluminides. In: LMPC 2007 Proceedings of the 2007 International Symposium on Liquid Metal Processing and Casting. LMPC, pp. 207-212.

Harding, R.A., Wickins, M., Wang, H., Djambazov, G. and Pericleous, K.A. (2011) Development of a turbulence-free casting technique for titanium aluminides. Intermetallics, 19 (6). pp. 805-813. ISSN 0966-9795 (doi:10.1016/j.intermet.2010.11.022)

Hayder, M. Ehtesham, Ierotheou, Constantinos S. and Keyes, David E. (2001) Three parallel programming paradigms: Comparisons on an archetypal PDE computation. In: Columbus, Frank, (ed.) Progress in Computer Research. Nova Science Publishers, Inc., Commack, NY, USA, pp. 17-38. ISBN 1-59033-011-0

Hughes, M., Pericleous, K.A. and Cross, M. (1994) The CFD analysis of simple parabolic and elliptic MHD flows. Applied Mathematical Modelling, 18 (3). pp. 150-155. ISSN 0307-904X (doi:10.1016/0307-904X(94)90257-7)

Hughes, Michael, Pericleous, Koulis and Strusevitch, Nadia (2002) Modelling the fluid dynamics and coupled phenomena in arc weld pools. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 63-81. ISBN 9781902653563

Hughes, Michael, Strussevich, Nadia, Bailey, Christopher, McManus, Kevin, Kaufmann, Jens, Flynn, David and Desmulliez, Marc P.Y. (2009) Numerical algorithms for modelling electrodeposition: Tracking the deposition front under forced convection from megasonic agitation. International Journal for Numerical Methods in Fluids, 64 (3). pp. 237-268. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.2140)

Hughes, Michael, Taylor, Gareth A. and Pericleous, Koulis (2000) Thermocapillary and magnetohydrodynamic effects in modelling the thermodynamics of stationary welding processes. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 13 (1). pp. 99-113. ISSN 0969-8248

Ierotheou, C., Lai, C.-H., Palansuriya, C.J. and Pericleous, K.A. (1998) Simulation of 2-D metal cutting by means of a distributed algorithm. The Computer Journal, 41 (1). pp. 57-63. ISSN 0010-4620 (Print), 1460-2067 (Online) (doi:10.1093/comjnl/41.1.57)

Ierotheou, C.S., Forsey, C.R. and Leatham, M. (2000) The implementation of an aeronautical CFD flow code onto distributed memory parallel systems. International journal for Numerical Methods in Fluids, 32 (8). pp. 903-920. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/(SICI)1097-0363(20000430)32:8<903::AID-FLD950>3.0.CO;2-C)

Ierotheou, C.S., Jin, H., Matthews, G., Johnson, S.P. and Hood, R. (2005) Generating OpenMP code using an interactive parallelization environment. Parallel Computing, 31 (10-12). pp. 999-1012. ISSN 0167-8191 (doi:10.1016/j.parco.2005.03.008)

Ierotheou, C.S., Jin, H., Matthews, G., Johnson, S.P. and Hood, R. (2004) An environment for OpenMP code parallelization. In: Parallel Computing — Software Technology, Algorithms, Architectures and Applications. Advances in Parallel Computing (13). Elsevier B.V., pp. 811-818. ISBN 9780444516893 (doi:10.1016/S0927-5452(04)80099-6)

Ierotheou, C.S., Johnson, S., Leggett, P. and Cross, M. (2002) The Shared Memory Parallelisation of an Ocean Modelling Code using an Interactive Parallelisation Toolkit. In: Computational Science - ICCS 2002: International Conference Amsterdam, The Netherlands, April 21–24, 2002 Proceedings. Lecture Notes in Computer Science, II (2330). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 953-962. ISBN 9783540435938 ISSN 0302-9743 (doi:10.1007/3-540-46080-2_100)

Ierotheou, C.S., Johnson, S.P., Cross, M. and Leggett, P.F. (1996) Computer aided parallelisation tools (CAPTools) — conceptual overview and performance on the parallelisation of structured mesh codes. Parallel Computing, 22 (2). pp. 163-195. ISSN 0167-8191 (doi:10.1016/0167-8191(95)00004-6)

Ierotheou, C.S., Johnson, S.P., Leggett, P.F and Cross, M. (2003) Using an interactive parallelisation toolkit to parallelise an ocean modelling code. Future Generation Computer Systems, 19 (5). pp. 789-801. ISSN 0167-739X (doi:10.1016/S0167-739X(02)00185-1)

Ierotheou, C.S., Johnson, S.P., Leggett, P.F., Cross, M., Evans, E.W., Jin, H., Frumkin, M. and Yan, J. (2001) The semi-automatic parallelisation of scientific application codes using a computer aided parallelisation toolkit. Scientific Programming, 9 (2-3). pp. 163-173. ISSN 1058-9244 (Print), 1875-919X (Online)

Ierotheou, Cos, Jin, H., Matthews, G., Johnson, Steve, Hood, R. and Leggett, Peter (2007) Using an interactive software environment for the parallelization of real-world scientific applications. International Journal of Computer Mathematics, 84 (2). pp. 167-175. ISSN 0020-7160 (doi:10.1080/00207160601169942)

Janes, D., Ewer, J., Galea, E., Patel, M. and Knight, B. (2001) Automatic dynamic control of CFD base fire modelling simulations. In: Conference Proceedings: Interflam 2001: 9th International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 811-822. ISBN 0953231283

Janssen, R., Dracopoulos, M., Parrott, K., Slessor, E., Alotto, P., Molfino, P., Nervi, M. and Simkin, J. (1998) Parallelisation of electromagnetic simulation codes. IEEE Transactions on Magnetics, 34 (5). pp. 3423-3426. ISSN 0018-9464 (doi:10.1109/20.717806)

Ji, Yan and Plainiotis, Stellios (2006) Design for sustainability. China Architecture & Building Press, Beijing. ISBN 7112083907

Jia, F., Galea, E.R, and Patel, M.K. (2000) The numerical simulation of compartment fires using an integrated gas and solid phase combustion model. In: ACME '2000 The 8th Annual Conference of the Association for Computational Mechanics in Engineering. Extended Abstracts. University of Greenwich, Greenwich, London, UK, pp. 50-53. ISBN 1861661509

Jia, F., Galea, E.R. and Patel, M.K. (1999) Numerical simulation of the mass loss process in pyrolizing char materials. Fire and Materials, 23 (2). pp. 71-78. ISSN 0308-0501 (Print), 1099-1018 (Online) (doi:10.1002/(SICI)1099-1018(199903/04)23:2<71::AID-FAM672>3.0.CO;2-5)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of fire spread within a compartment using an integrated gas and solid phase combustion model. Journal of Applied Fire Science, 8 (4). pp. 327-352. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/UY41-W38Q-X6KK-TXYV)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of noncharring thermal degradation and its application to the prediction of compartment fire development. In: Fire Safety Science: Proceedings of the Sixth International Symposium. IAFSS Symposiums (6). International Association for Fire Safety Science, Greenwich, London, UK, pp. 953-964. ISBN 0925223255 (doi:10.3801/IAFSS.FSS.6-953)

Jia, F., Galea, E.R. and Patel, M.K. (1999) The numerical simulation of the noncharring pyrolysis process and fire development within a compartment. Applied Mathematical Modelling, 23 (8). pp. 587-607. ISSN 0307-904X (doi:10.1016/S0307-904X(99)00003-7)

Jia, F., Galea, E.R. and Patel, M.K. (1997) The prediction of fire propagation in enclosure fires. In: Fire Safety Science: Proceedings of the fifth international symposium. International Association for Fire Safety Science, Greenwich, London, pp. 439-450. ISBN 4990062555 ISSN 1817-4299 (doi:10.3801/IAFSS.FSS.5-439)

Jia, F., Patel, M. and Galea, E. (2004) CFD fire simulation of the Swissair flight 111 in-flight fire. In: Conference Proceedings: Interflam 2004: 10th International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 1195-1206. ISBN 0954121643

Jia, F., Patel, M.K. and Galea, E.R. (2004) Simulating the Swissair flight 111 in-flight fire using the CFD fire simulation software SMARTFIRE. In: Fourth Triennial International Fire and Cabin Safety Research Conference, 15–19 Nov 2004, Lisbon, Portugal.

Jia, F., Patel, M.K., Galea, E.R., Grandison, A. and Ewer, J. (2006) CFD fire simulation of the Swissair flight 111 in-flight fire - part II: fire spread analysis. The Aeronautical Journal of the Royal Aeronautical Society, 110 (1107):3069. pp. 303-314. ISSN 0001-9240

Jia, Fuchen, Galea, Edwin and Patel, Mayur (1998) The numerical simulation of enclosure fires using a Cfd fire field model coupled with a pyrolysis based solid fuel combustion submodel—a first approximation. Journal of Fire Protection Engineering, 9 (4). pp. 1-17. ISSN 1042-3915 (Print), 1532-172X (Online) (doi:10.1177/104239159800900402)

Jia, Fuchen, Patel, Mayur and Galea, Edwin (2003) Flight simulation. Fire Prevention & Fire Engineers Journal, 2003 (Sept.). pp. 27-29. ISSN 1478-3576

Johnson, S.P., Cross, M. and Everett, M.G. (1996) Exploitation of symbolic information in interprocedural dependence analysis. Parallel Computing, 22 (2). pp. 197-226. ISSN 0167-8191 (doi:10.1016/0167-8191(96)00002-6)

Johnson, S.P., Ierotheou, C.S. and Cross, M. (1996) Automatic parallel code generation for message passing on distributed memory systems. Parallel Computing, 22 (2). pp. 227-258. ISSN 0167-8191 (doi:10.1016/0167-8191(96)00005-1)

Johnson, Stephen, Evans, Emyr, Jin, Haoqiang and Ierotheou, Constantinos (2005) The ParaWise expert assistant - widening accessibility to efficient and scalable tool Generated OpenMP code. In: Shared Memory Parallel Programming with Open MP: 5th International Workshop on Open MP Applications and Tools, WOMPAT 2004, Houston, TX, USA, May 17-18, 2004, Revised Selected Papers. Lecture Notes in Computer Science (3349). Springer, Berlin Heidelberg, pp. 67-82. ISBN 9783540245605 ISSN 0302-9743 (doi:10.1007/978-3-540-31832-3_7)

Kao, A., Djambazov, G., Pericleous, K. and Voller, V. (2009) Thermoelectric MHD in dendritic solidification. Magnetohydrodynamics, 45 (3). pp. 305-316. ISSN 0024-998X

Kao, A. and Pericleous, K. (2012) Investigating magnetic field orientation as an operational parameter in thermo-electric MHD solidification. Journal of Iron and Steel International, 19 (S1-1). pp. 260-264. ISSN 1006-706X

Kao, A. and Pericleous, K. (2012) A multi scale method for thermo-electric MHD in dendritic solidification. Journal of Iron and Steel International, 19 (S1-1). pp. 317-321. ISSN 1006-706X

Kao, A., Pericleous, K., Patel, M.K. and Voller, V. (2009) Effects of magnetic fields on crystal growth. International Journal of Cast Metals Research, 22 (1-4). pp. 147-150. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/136404609X367551)

Kao, A., Shevchenko, N., Roshchupinka, O., Eckert, E. and Pericleous, K. (2015) The effects of natural, forced and thermoelectric magnetohydrodynamic convection during the solidification of thin sample alloys. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing. ISSN 1757-8981 (Print), 1757-899X (Online) (doi:10.1088/1757-899X/84/1/012018)

Kao, A., Shevchenko, N., Roshchupinka, O., Eckert, S. and Pericleous, Koulis (2015) Thin sample alloy solidification in electromagnetic driven convection. In: 8th International Conference on Electromagnetic Processing of Materials. Groupe Élaboration par procédés magnétiques (Saint-Martin d'Hères, Isère). ISBN 9782955386101

Kao, Andrew (2015) Analytic solutions to determine critical magnetic fields for thermoelectric magnetohydrodynamics in alloy solidification. Metallurgical and Materials Transactions A, 46A (9). pp. 4215-4233. ISSN 1073-5623 (Print), 1543-1940 (Online) (doi:10.1007/s11661-015-2998-x)

Kao, Andrew (2010) Thermoelectric magnetohydrodynamics in dendritic solidification. PhD thesis, University of Greenwich.

Kao, Andrew, Djambazov, Georgi, Pericleous, Koulis A. and Voller, V. (2008) Effects of magnetic fields on crystal growth. Proceedings of the 7th International PAMIR Conference: Fundamental and Applied MHD and COST P17 Annual Workshop 2008. Institute of Physics, University of Latvia, Salaspils, Latvia, pp. 621-625.

Kao, Andrew, Gao, Jianrong, Mengkun, Han, Pericleous, Koulis, Alexandrov, Dmitri V. and Galenko, Peter K. (2015) Dendritic growth velocities in an undercooled melt of pure nickel under static magnetic fields: A test of theory with convection. Acta Materialia, 103. pp. 184-191. ISSN 1359-6454 (doi:10.1016/j.actamat.2015.10.014)

Kao, Andrew, Lee, Peter David and Pericleous, Koulis (2014) Influence of a slow rotating magnetic field in thermoelectric magnetohydrodynamic processing of alloys. ISIJ International, 54 (6). pp. 1283-1287. ISSN 0915-1559 (Print), 1347-5460 (Online) (doi:10.2355/isijinternational.54.1283)

Kao, Andrew and Pericleous, Koulis (2012) TEMHD effects on solidification under microgravity conditions. In: TMS 2012: The Minerals, Metals & Materials Society, 11-15 March 2012, Orlando USA. TMS Publications.

Kao, Andrew, Pericleous, Koulis A., Patel, Mayur and Voller, V. (2009) Thermoelectric MHD effects on equiaxed crystal morphology. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN Forschungszentrum Dresden-Rossendorf

Kao, Andrew, Pericleous, Koulis A., Patel, Mayur K. and Voller, Vaughan R. (2010) Thermoelectric effects on alloy solidification microstructure. In: Cockcroft, Steve L. and Maijer, Daan M., (eds.) Modeling of Casting, Welding, and Advanced Solidification Processes. John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 521-528. ISBN 978-0-87339-742-1 (hbk)

Kao, Andrew, Pericleous, Koulis A. and Voller, V. (2008) Effects of magnetic fields on crystal growth. In: Schrefler, B.A. and Perego, U., (eds.) 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), 30 June - 4 July 2008, Venice, Italy. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain. ISBN 978-84-96736-55-9

Kao, D, Pericleous, Koulis A., Graham, Deryn and Knight, Brian (2006) Use of a coupled mechanical-acoustic computational model to identify failure mechanisms in paper production. In: Proceedings of the Thirteenth International Congress on Sound and Vibration, ICSV13, 2-6 Jul 2006, Vienna, Austria.

Kao, David, Graham, Deryn, Knight, Brian and Pericleous, Koulis A. (2007) A mathematical description of the acoustic coupling of the mass/spring model. Applied Mathematical Modelling, 31 (12). pp. 2684-2695. ISSN 0307-904X (doi:10.1016/j.apm.2006.10.016)

Kao, David, Graham, Deryn and Pericleous, Koulis A. (2007) An analysis of the changes to the mechanical and acoustical properties of paper caused by the damage mechanisms present in the fibre structure. 14th International Congress on Sound and Vibration (ICSV14). University of New South Wales. ISBN 97807334 25165

Kerrison, L., Galea, E.R. and Patel, M.K. (1998) A two-dimensional numerical investigation of the oscillatory flow behaviour in rectangular fire compartments with a single horizontal ceiling vent. Fire Safety Journal, 30 (4). pp. 357-382. ISSN 0379-7112 (doi:10.1016/S0379-7112(97)00042-8)

Kersaudy-Kerhoas, Maïwenn, Kavanagh, Deirdre, Xue, Xiangdong, Patel, Mayur, Bailey, Christopher, Dhariwal, Resham and Desmulliez, Marc P.Y. (2008) Integrated biomedical device for blood preparation. 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 447-452. ISBN 978-1-4244-2814-4 (Print) 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684389)

Kiani, N.J., Patel, M.K. and Lai, Choi-Hong (2005) Computational modelling of reactive transport in hydrogeological systems. In: Water Resources Management III. WIT Transactions on Ecology and the Environment (80). WIT Press, Southampton, UK, pp. 239-249. ISBN 1845640071

Kiani, Nageena, Patel, Mayur and Lai, Choi-Hong (2007) CFD analysis of one-dimensional infiltration in vadose zone. Journal of Algorithms & Computational Technology, 1 (4). pp. 477-493. ISSN 1748-3018 (doi:10.1260/174830107783133897)

Kocher, H.M., Linklater, K., Patel, S. and Ellul, J.P.M. (2001) Epidemiological study of oesophageal and gastric cancer in south-east England. British Journal of Surgery, 88 (9). pp. 1249-1257. ISSN 0007-1323 (Print), 1365-2168 (Online) (doi:10.1046/j.0007-1323.2001.01847.x)

Lai, C.-H. (1997) An application of quasi-Newton methods for the numerical solution of interface problems. Advances in Engineering Software, 28 (5). pp. 333-339. ISSN 0965-9978 (doi:10.1016/S0965-9978(97)00009-4)

Lai, C.-H. (1997) An extension of Purcell's vector method with applications to panel element equations. Computers & Mathematics with Applications, 33 (7). pp. 101-114. ISSN 0898-1221 (doi:10.1016/S0898-1221(97)00045-X)

Lai, C.-H., Cuffe, A.M. and Pericleous, K.A. (1998) A defect equation approach for the coupling of subdomains in domain decomposition methods. Computers & Mathematics with Applications, 35 (6). pp. 81-94. ISSN 0898-1221 (doi:10.1016/S0898-1221(98)00021-2)

Lai, C.-H., Cuffe, A.M. and Pericleous, K.A. (1996) A domain decomposition algorithm for viscous/inviscid coupling. Advances in Engineering Software, 26 (2). pp. 151-159. ISSN 0965-9978 (doi:10.1016/0965-9978(96)00001-4)

Lai, C.-H., Cuffe, A.M. and Pericleous, K.A. (1996) A domain decomposition algorithm for viscous/inviscid coupling. Advances in Engineering Software, 26 (2). pp. 151-159. ISSN 0965-9978 (doi:10.1016/0965-9978(96)00001-4)

Lai, C.-H., Ierotheou, C.S., Palansuriya, C.J. and Pericleous, K.A. (2001) Domain decomposition methods for welding problems. In: 12th International Conference on Domain Decomposition Methods in Sciences and Engineering. ddm.org, pp. 411-419.

Lai, C.-H., Ierotheou, C.S., Palansuriya, C.J. and Pericleous, K.A. (2001) Performance evaluation of a distributed algorithm for an inverse heat conduction problem. The Computer Journal, 44 (3). pp. 214-220. ISSN 0010-4620 (Print), 1460-2067 (Online) (doi:10.1093/comjnl/44.3.214)

Lai, C.-H., Ierotheou, C.S., Palansuriya, C.J. and Pericleous, K.A. (2001) A domain decomposition algorithm for inverse welding problems. Computing and Visualization in Science, 4 (2). pp. 105-109. ISSN 1432-9360 (doi:10.1007/s007910100062)

Lai, C.-H., Ierotheou, C.S., Palansuriya, C.J., Pericleous, K.A., Espedal, M.S. and Tai, X.-C. (1999) Accuracy of a domain decomposition method for the recovering of discontinuous heat sources in metal sheet cutting. Computing and Visualization in Science, 2 (2-3). pp. 149-152. ISSN 1432-9360 (Print), 1433-0369 (Online) (doi:10.1007/s007910050037)

Lai, C.-H., Parrott, A.K., Rout, S. and Honnor, M.E. (2005) A distributed algorithm for European options with nonlinear volatility. Computers & Mathematics with Applications, 49 (5-6). pp. 885-894. ISSN 0898-1221 (doi:10.1016/j.camwa.2004.03.014)

Lai, C.H. (2005) [Review] M. Feistauer, J. Felcman, I. Straskbraba, Mathematical and Computational Methods for Compressible Flow, Oxford Science Publication, Oxford, ISBN 0198505884, 2004 (535pp.). Journal of Sound and Vibration, 287 (3). p. 650. ISSN 0022-460X (Print), 0022-460X (Online) (doi:10.1016/j.jsv.2005.05.014)

Lai, Choi-Hong (2008) Numerical solutions of certain nonlinear models in European options on a distributed computing environment. In: Ehrhardt, Matthias, (ed.) Nonlinear Models in Mathematical Finance: New Research Trends in Option Pricing. Nova Science Publishers, Inc., Hauppauge, NY, USA, pp. 305-320. ISBN 978-1-60456-931-5

Lai, Choi-Hong, Crane, Diane and Davies, Alan (2007) On a parallel time-domain method for the nonlinear Black-Scholes equation. In: Domain Decomposition Methods in Science and Engineering XVI. Lecture Notes in Computational Science and Engineering (55). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 659-666. ISBN 9783540344681 ISSN 1439-7358 (doi:10.1007/978-3-540-34469-8_82)

Lai, Liang, Djambazov, G., Lai, Choi-Hong, Pericleous, Koulis A. and Magoules, Frederic (2006) Experience of using a CFD code for estimating the noise generated by gusts along the sun-roof of a car. In: CD-ROM Proceedings of the Thirteenth International Congress on Sound and Vibration, ICSV13, July 2-6, 2006, Vienna, Austria.

Lebon, G S Bruno, Tzanakis, I, Pericleous, K A and Eskin, D G (2015) Comparison between low-order and high-order acoustic pressure solvers for bubbly media computations. Journal of Physics: Conference Series, 656 (012134). pp. 1-4. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/656/1/012134)

Lebon, G.S. Bruno, Patel, Mayur K., Djambazov, Georgi and Pericleous, Koulis A. (2012) Mathematical modelling of a compressible oxygen jet entering a hot environment using a pressure-based finite volume code. Computers & Fluids, 59. pp. 91-100. ISSN 0045-7930 (doi:10.1016/j.compfluid.2012.02.016)

Lebon, G.S.B., Pericleous, K., Tzanakis, I. and Eskin, D. (2015) Application of the "Full Cavitation Model" to the fundamental study of cavitation in liquid metal processing. IOP Conference Series: Materials Science and Engineering. IOP Publishing Ltd.. ISSN 1757-8981 (Print), 1757-899X (Online) (doi:10.1088/1757-899X/72/5/052050)

Lebon, Gerard S B, Pericleous, Kyriacos, Tzanakis, Iakovos and Eskin, Dmitry (2015) A model of cavitation for the treatment of a moving liquid metal volume. In: Advances in the Science and Engineering of Casting Solidification: An MPMD Symposium Honoring Doru Michael Stefanescu. TMS-Wiley, USA, pp. 23-30. ISBN 9781119082385

Lebon, Gerard S. B., Pericleous, Koulis, Tzanakis, Iakovos and Eskin, Dmitry G. (2015) Dynamics of two interacting hydrogen bubbles in liquid aluminium under the influence of a strong acoustic field. Physical Review E (PRE), 92 (4). 043004. ISSN 1539-3755 (Print), 1550-2376 (Online) (doi:10.1103/PhysRevE.92.043004)

Leggett, P.F., Johnson, S.P and Cross, M. (2000) CAPLib - A 'thin layer' message passing library to support computational mechanics codes on distributed memory parallel systems. Advances in Engineering Software, 32 (1). pp. 61-83. ISSN 0965-9978 (doi:10.1016/S0965-9978(00)00056-9)

Leggett, P.F., Marsh, A.T.J., Johnson, S.P. and Cross, M. (1996) Integrating user knowledge with information from parallelisation tools to facilitate the automatic generation of efficient parallel FORTRAN code. Parallel Computing, 22 (2). pp. 259-288. ISSN 0167-8191 (doi:10.1016/0167-8191(95)00003-8)

Lena, Claudio, Djambazov, Georgi and Pericleous, Koulis A. (2008) Modelling metal powder production by the gas atomisation process. TMS 2008 Annual Meeting Supplemental Proceedings: Volume 2: Materials Characterization, Computation and Modeling. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 279-285. ISBN 978-0-87339-717-9

Lu, Hua, Bailey, C. and Cross, M. (2000) Reliability analysis of flip chip designs via computer simulation. Journal of Electronic Packaging, 122 (3). pp. 214-219. ISSN 1528-9044 (Print), 1043-7398 (Online) (doi:10.1115/1.1286122)

Lu, Hua, Rafii-Tabar, H. and Cross, M. (1997) Molecular dynamics simulation of fractures using an N-body potential. Philosophical Magazine Letters, 75 (5). pp. 237-244. ISSN 0950-0839 (Print), 1362-3036 (Online) (doi:10.1080/095008397179480)

Lü, Lan, Wang, Meiqing and Lai, Choi-Hong (2008) Image denoise by fourth-order PDE based on the changes of laplacian. Journal of Algorithms & Computational Technology, 2 (1). pp. 99-110. ISSN 1748-3018 (doi:10.1260/174830108784300295)

Mahalingam, Arun, Jia, Fuchen, Patel, Mayur and Galea, Edwin R. (2007) Modelling generation and transport of toxic combustion products in enclosure fires using bench-scale test data. Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications, Greenwich, pp. 1631-1636. ISBN 9780954121693

Manoylov, Anton, Djambazov, Georgi, Bojarevics, Valdis and Pericleous, Koulis (2016) Multiple timescale modelling of particle suspensions in metal melts subjected to external forces. In: ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) Crete Island, Greece, 5–10 June 2016. ECCOMAS Congress 2016, Greece. (Submitted)

Markatos, N.C., Pericleous, K. and Simitovic, R. (1987) A hydrometeorological, three-dimensional model of thermal energy releases into environmental media. International Journal for Numerical Methods in Fluids, 7 (3). pp. 263-276. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650070306)

Markatos, N.C. and Pericleous, K.A. (1984) Laminar and turbulent natural convection in an enclosed cavity. International Journal of Heat and Mass Transfer, 27 (5). pp. 755-772. ISSN 0017-9310 (doi:10.1016/0017-9310(84)90145-5)

Markatos, N.C. and Pericleous, K.A. (1984) Une recherche des incendies tridimensionnels dans des compartiments / An investigation of three-dimensional fires in enclosures. Revue générale de thermique, 23 (266). pp. 67-78. ISSN 0035-3159

Markatos, NC and Pericleous, Kyriacos A (1983) An investigation of three-dimensional fires in enclosures. Fire Dynamics and Heat Transfer, HTD-25. pp. 115-124.

Markatos, Nikos C. and Pericleous, Coulis A. (1983) GRAFFIC: a computer package for the interactive graphical representation of fluid-flow phenomena. Advances in Engineering Software, 5 (2). pp. 86-91. ISSN 0965-9978 (doi:10.1016/0141-1195(83)90170-5)

Marsden, R.H., Croft, T.N. and Lai, C.H. (2002) Domain decomposition using a 2-level correction scheme. In: Sloot, Peter M.A., Hoekstra, Alfons G., Tan, C.J. Kenneth and Dongarra, Jack J., (eds.) Computational Science - ICCS 2002: International Conference Amsterdam, The Netherlands, April 21–24, 2002 Proceedings. Lecture Notes in Computer Science, II (2330). Springer-Verlag, Berlin, Heidelberg, Germany, pp. 480-489. ISBN 9783540435938 (doi:10.1007/3-540-46080-2_50)

Matthews, Gregory, Hood, Robert, Jin, Haoqiang, Johnson, Stephen and Ierotheou, Constantinos (2003) Automatic relative debugging of OpenMP programs. In: Fifth European Workshop on OpenMP, 22-23 Sep 2003, Aachen, Germany. (Unpublished)

Mawhinney, R.N., Galea, E.R. and Patel, M.K. (1996) Fire-sprinkler spray interaction modelling using an Euler-Lagrange approach. In: Conference Proceedings: Interflam '96: Seventh International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 841-845. ISBN 0951632094

Mawhinney, R.N., Grandison, A.J., Galea, E.R., Patel, M.K. and Ewer, J. (2000) The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel. Journal of Applied Fire Science, 9 (4). pp. 311-345. ISSN 1044-4300 (Print), 1541-4183 (Online) (doi:10.2190/L07V-KGDD-KUPJ-D397)

McBride, Diane, Croft, Nick and Cross, Mark (2003) Combined vertex-based - cell-centred finite volume method for flows in complex geometries. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 351-356. ISBN 978064309038X

McCready, M., Patel, S. and Rennolls, K. (1997) An investigation of the effect of road traffic pollution on asthma, using Geographical Information Systems. In: Barnett, Vic and Feridun Turkman, K., (eds.) Statistics for the Environment 3. Pollution Assessment and Control. John Wiley & Sons, Ltd., Chichester, UK, pp. 287-300. ISBN 978-0-471-96435-3

McManus, K., Cross, M., Walshaw, C., Johnson, S., Bailey, C., Pericleous, K., Slone, A. and Chow, P. (2000) Virtual manufacturing and design in the real world - implementation and scalability on HPPC systems. In: Parallel Computational Fluid Dynamics 1999: Towards Teraflops, Optimization and Novel Formulations. North-Holland, Amsterdam, The Netherlands, pp. 47-56. ISBN 978044482851 (doi:10.1016/B978-044482851-4.50009-8)

McManus, K., Johnson, S.P. and Cross, M. (1999) Converting best manual practice into generic automatable strategies for unstructured mesh parallelisation. Concurrency: Practice and Experience, 11 (11). pp. 593-614. ISSN 1040-3108 (doi:10.1002/(SICI)1096-9128(199909)11:11<593::AID-CPE446>3.0.CO;2-L)

McManus, Kevin, Cross, Mark, Walshaw, Chris, Croft, Nick and Williams, Alison (2002) Parallel performance in multi-physics simulation. In: Computational Science - ICCS 2002: International Conference Amsterdam, The Netherlands, April 21–24, 2002 Proceedings. Lecture Notes in Computer Science, II (2330). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 806-815. ISBN 9783540435938 ISSN 0302-9743 (doi:10.1007/3-540-46080-2_85)

McManus, Kevin, Cross, Mark, Walshaw, Chris, Johnson, Steve and Leggett, Peter (2000) A scalable strategy for the parallelization of multiphysics unstructured mesh-iterative codes on distributed-memory systems. The International Journal of High Performance Computing Applications, 14 (2). pp. 137-174. ISSN 1094-3420 (Print), 1741-2846 (Online) (doi:10.1177/109434200001400203)

McManus, Kevin, Williams, Alison, Cross, Mark, Croft, Nick and Walshaw, Chris (2005) Assessing the scalability of multiphysics tools for modeling solidification and melting processes on parallel clusters. The International Journal of High Performance Computing Applications, 19 (1). pp. 1-27. ISSN 1094-3420 (Print), 1741-2846 (Online) (doi:10.1177/1094342005051198)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidized bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th International Conference on CFD in the oil & gas, metallurgical and process industries. E SINTEF research reports, A22601 . SINTEF, Trondheim, Norway. ISBN 9788214052626 (Print), 9788251928113 (Electronic)

Molaei, M., Pericleous, K.A. and Patel, M.K. (2012) Modelling and CFD simulation of a fluidizes bed reactor to capture CO2 by solid sorbents. In: Proceedings of the 8th international conference on CFD in the oil & gas, metallurgical and process industries. SINTEF, Norway.

Monk, Peter and Parrott, Kevin (2001) Phase-accuracy comparisons and improved far-field estimates for 3-D edge elements on tetrahedral meshes. Journal of Computational Physics, 170 (2). pp. 614-641. ISSN 0021-9991 (doi:10.1006/jcph.2001.6753)

Morris, J.E., Tilford, T., Bailey, C., Sinclair, K.I. and Desmulliez, M.P.Y. (2009) Polymer cure modeling for microelectronics applications. In: 32nd International Spring Seminar on Electronics Technology, 2009. ISSE 2009. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 978-1-4244-4260-7 (print) (doi:10.1109/ISSE.2009.5206929)

Morris, James E., Tilford, Tim, Ferenets, M. and Bailey, Christopher (2009) A critical analysis of polymer cure modeling for microelectronics applications. In: IMAPS Nordic Conference 2009, 13-15 September 2009, Tønsberg, Norway.

Mouchmov, A., Voller, V.R., Cross, M., Croft, T.N. and Pericleous, K. (2003) Macro-segregation of multi-component alloys in shape casting simulation. In: Proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, p. 277. ISBN 0873395557

Pan, Y., Ierotheou, C.S. and Hayat, M.M. (2002) Parallel implementation of the recurrence method for computing the power-spectral density of thin avalanche photodiodes. In: Proceedings. International Conference on Parallel Processing. 2002. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 298-305. ISBN 0769516777 ISSN 1530-2016 (doi:10.1109/ICPPW.2002.1039744)

Pan, Yi, Ierotheou, Constantinos S. and Hayat, Majeed M. (2004) Parallel bandwidth characteristics calculations for thin avalanche photodiodes on a SGI Origin 2000 supercomputer. Concurrency and Computation: Practice and Experience, 16 (12). pp. 1207-1225. ISSN 1532-0634 (doi:10.1002/cpe.834)

Panaitescu, Ileana, Repetto, Maurizio, Leboucher, Laurent and Pericleous, Kyriacos (2000) Magneto-hydro-dynamic analysis of an electrolysis cell for aluminum production. IEEE Transactions on Magnetics, 36 (4). pp. 1305-1308. ISSN 0018-9464 (doi:10.1109/20.877679)

Parrott, Kevin and Rout, Sweta (2006) Semi-Lagrange time integration for PDE models of asian options. Progress in Industrial Mathematics at ECMI 2004. Mathematics in Industry, 8 . Springer Berlin / Heidelberg, Berlin, pp. 432-436. ISBN 9783540280729 (doi:10.1007/3-540-28073-1)

Parrott, Kevin and Tilford, Tim (2007) Numerical simulation of microwave thawing using a coupled solver approach. PAMM - Proceedings in Applied Mathematics and Mechanics, 7 (1). pp. 1150601-1150602. ISSN 1617-7061 (online) (doi:10.1002/pamm.200700212)

Parry, John, Marooney, Chris, Warner, Matt, Bailey, Chris and Pericleous, Koulis (2002) An integrated approach to flow, thermal and mechanical modeling of electronics devices. In: ITHERM 2002. The Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems [Proceedings]. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, U.S.A., pp. 862-868. ISBN 0780371526 ISSN 1089-9870 (doi:10.1109/ITHERM.2002.1012545)

Patel, M.K., Bailey, C., Djambazov, G., Shrimpton, J. and Jalili, V. (2003) Application of CFD in vacuum dezincing process. In: The 3rd International Conference on CFD in the Minerals and Process Industries [Proceedings]. CSIRO Publishing, Collingwood, Victoria, Australia, pp. 313-318. ISBN 978064309038X

Patel, M.K., Pericleous, K. and Cross, M. (1993) Numerical modelling of circulating fluidized beds. International Journal of Computational Fluid Dynamics, 1 (2). pp. 161-176. ISSN 1061-8562 (Print), 1029-0257 (Online) (doi:10.1080/10618569308904470)

Patel, M.K., Pericleous, K.A. and Baldwin, S. (1995) The development of a structured mesh grid adaption technique for resolving shock discontinuities in upwind Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 20 (10). pp. 1179-1197. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/fld.1650201006)

Patel, S. P., Järvelin, M.-R. and Little, M. P. (2002) Review of worldwide variations of asthma prevalence in children. In: 2nd Conference on Epidemiological Longitudinal Studies in Europe, 12–14 Jun 2002, Oulu, Finland.

Peng, T., Wang, Meiqing and Lai, Choi-Hong (2007) Design of parallel algorithms for fractal video compression. International Journal of Computer Mathematics, 84 (2). pp. 193-202. ISSN 0020-7160 (doi:10/1080/00207160601168456)

Pericleous, K. and Bojarevics, V. (2005) Pseudo-spectral solutions for fluid flow and heat transfer in electro-metallurgical applications. In: Fourth International Conference on CFD in the Oil and Gas, Metallurgical & Process Industries, 6-8 Jun 2005, Trondheim, Norway. (Unpublished)

Pericleous, K., Cross, M., Hughes, M. and Cook, D. (1996) Mathematical modelling of the solidification of liquid tin with electromagnetic stirring. Magnetohydrodynamics, 32 (4). pp. 443-450. ISSN 0024-998X

Pericleous, K., Djambazov, G., Domgin, J.F. and Gardin, P. (2008) Dynamic modelling and validation of the metal/flux interface in continuous casting. In: 6th European Conference on Continuous Casting. Associazione Italiana Di Metallurgia (AIM), Riccione, Italy. ISBN 88-85298-65-6

Pericleous, K., Djambazov, G., Lebon, B., Croft, T.-N., Domgin, J.-F. and Gardin, P. (2008) Time-dependent modelling and experimental validation of the metal/flux interface in a continuous casting mould. Revue de Métallurgie, 105 (1). pp. 33-43. ISSN 0035-1563 (Print), 1156-3141 (Online) (doi:10.1051/metal:2008011)

Pericleous, K., Hughes, M., Cross, M., Cook, D., Bojarevics, V. and Tinios, G. (1996) Computational magnetohydrodynamics - Application. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76 (S4). pp. 113-116. ISSN 0044-2267 (Print), 1521-4001 (Online) (doi:10.1002/zamm.19960761408)

Pericleous, K.A, Molaei, M. and Patel, M.K. (2012) CO2 removal from industrial off-gas streams by fluidized bed carbonation. In: Salazar-Villalpando, Maria. D., Neelameggham, Neal R., Guillen, Donna Post, Pati, Soobhankar and Krumdick, Gregory K., (eds.) Energy Technology 2012: Carbon Dioxide Management and Other Technologies. J. Wiley & Sons, Inc., USA, pp. 39-46. ISBN 978-1-1182-9138-2

Pericleous, K.A. (2001) Computing the dynamic interaction of magnetic fields and turbulent conducting fluids in metals processing. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 5-22. ISBN 0873395131

Pericleous, K.A. (1994) Heat transfer in differentially heated non-newtonian cavities. International Journal of Numerical Methods for Heat and Fluid Flow, 4 (3). pp. 229-248. ISSN 0961-5539 (doi:10.1108/EUM0000000004040)

Pericleous, K.A. (1987) Mathematical simulation of hydrocyclones. Applied Mathematical Modelling, 11 (4). pp. 242-255. ISSN 0307-904X (doi:10.1016/0307-904X(87)90139-9)

Pericleous, K.A. (2002) The development and validation of computational MHD techniques for the modelling of metal production processes. In: Proceedings of the 5th International pamir Conference. Cost P6 Annual Workshop 2002. Fundamental and Applied MHD. International pamir Conference, L21-L26.

Pericleous, K.A., Bojarevics, V., Djambazov, G., Harding, R.A. and Wickins, M. (2005) Maximising heat transfer efficiency in the cold crucible induction melting process. In: EUROTHERM Seminar 82. Numerical Heat Transfer 2005 [Proceedings]. Institute of Thermal Technology, Silesian University of Technology, Gliwice, Poland, pp. 405-414. ISBN 8392238125

Pericleous, K.A., Chan, K.S. and Cross, M. (1995) Free-surface flow and heat transfer in cavities - The SEA algorithm. Numerical Heat Transfer Part B, 27 (4). pp. 487-507. ISSN 1040-7790 (Print), 1521-0626 (Online) (doi:10.1080/10407799508914969)

Pericleous, K.A. and Dempsey, S. (1996) Development of a fractal-based LES model in PHOENICS. Phoenics Journal of Computational Fluid Dynamics and Its Applications, 9 (1). ISSN 0969-8248

Pericleous, K.A., Moran, G.J., Bounds, S.M., Chow, P. and Cross, M. (1998) Three-dimensional free surface modelling in an unstructured mesh environment for metal processing applications. Applied Mathematical Modelling, 22 (11). pp. 895-906. ISSN 0307-904X (doi:10.1016/S0307-904X(98)10033-1)

Pericleous, K.A. and Rhodes, N. (1986) The hydrocyclone classifier — A numerical approach. International Journal of Mineral Processing, 17 (1-2). pp. 23-43. ISSN 0301-7516 (doi:10.1016/0301-7516(86)90044-X)

Pericleous, Koulis, Bojarevics, Valdis and Roy, Alan (2013) Modeling of EML in Combined AC/DC Magnetic Fields as the Basis for Microgravity Experiments. International Journal of Microgravity Science and Application, 30 (1). pp. 56-63. ISSN 0915-3616

Pericleous, Koulis, Djambazov, Georgi, Ward, Mark, Yuan, Lang and Lee, Peter D. (2013) A multiscale 3D model of the vacuum arc remelting process. Metallurgical and Materials Transactions A, 44 (12). pp. 5365-5376. ISSN 1073-5623 (Print), 1543-1940 (Online) (doi:10.1007/S11661-013-1680-4)

Pericleous, Koulis, Lebon, Bruno, Djambazov, Georgi and Patel, Mayur (2012) Mathematical modelling of a compressible oxygen jet interfacing with a free surface in a basic oxygen furnace for steel production. In: Nastac, Laurentiu, Zhang, Lifeng, Thomas, Brian G., Sabau, Adrian, El-Kaddah, Nagy, Powell, Adam C. and Combeau, Herve, (eds.) CFD Modeling and Simulation in Materials Processing. John Wiley & Sons, Inc., Hoboken, NJ, USA, pp. 287-294. ISBN 9781118296158 (doi:10.1002/9781118364697.ch34)

Pericleous, Koulis A. (1988) Computer modelling for the analysis of fluid flow, heat transfer and combustion in industry. Energy World, 161. pp. 9-11. ISSN 0307-7942

Pericleous, Koulis A. and Bojarevics, Valdis (2007) Pseudo-spectral solutions for fluid flow and heat transfer in electro-metallurgical applications. Progress in Computational Fluid Dynamics, 7 (2-4). pp. 118-127. ISSN 1468-4349 (doi:10.1504/PCFD.2007.013004)

Pericleous, Koulis A. and Bojarevics, Valdis (2007) The study of flow and temperature fields in conducting droplets suspended in a DC/AC combination field. Current Advances in Materials and Processes, 20 (4). p. 796. ISSN 0914-6628

Pericleous, Koulis A., Bojarevics, Valdis, Djambazov, G., Harding, R. and Wickins, M. (2006) Experimental and numerical study of the cold crucible melting process. Applied Mathematical Modelling, 30 (11). pp. 1262-1280. ISSN 0307-904X (doi:10.1016/j.apm.2006.03.003)

Pericleous, Koulis A., Bojarevics, Valdis, Harding, R.A. and Wickins, M. (2003) Experimental and numerical study of the cold crucible melting process. In: Third International Conference on CFD in the Minerals and Process Industries CSIRO, 10-12 Dec 2003, Melbourne, Australia.

Pericleous, Koulis A., Djambazov, G. and Wang, Hong (2006) Numerical modelling of the low-superheat casting of thin-section components. In: Gandin, Charles-André and Bellet, Michel, (eds.) Modeling of casting, welding, and advanced solidification XI : proceedings from the Eleventh International Conference on Modelling of Casting, Welding and Advanced Solidification Processes. TMS - The Minerals Metals and Materials Society, Warrendale, Pennsylvania, USA. ISBN 9780873396295

Pericleous, Koulis A., Djambazov, Georgi, Bojarevics, Valdis and Ward, R.M. (2009) A unified 3D model of the VAR process. In: Lee, Peter D., Mitchell, Alec and Williamson, Rod, (eds.) International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 21-28. ISBN 978-0-87339-743-8

Pericleous, Koulis A. and Patel, Mayur (1987) The modelling of tangential and axial agitators in chemical reactors. Physicochemical Hydrodynamics, 8 (2). pp. 105-123.

Pericleous, Koulis A., Plainiotis, S. and Fisher, Bernard (2006) Airborne transport of Saharan dust to the Mediterranean and to the Atlantic. In: Tian, H., (ed.) Proceedings of the second IASTED International Conference on Environmental Modelling and Simulation, November 29-December 1, 2006, St. Thomas, US Virgin Islands. ACTA Press, Anaheim ; Calgary ; Zürich, pp. 54-59. ISBN Print: 978-0-88986-617-1 CD: 0 88986 619 8

Pericleous, Kyriacos, Djambazov, Georgi, Yuan, Lang, Ward, Mark and Lee, Peter D. (2012) A multi-scale 3D model of the vacuum arc remelting process. In: 2012 TMS Supplemental Proceedings: Materials Properties, Characterization, and Modeling. J. Wiley & Sons Inc, USA, pp. 291-298. ISBN 978-1-11829-609-7

Pericleous, Kyriacos A and Chan, Koon (1994) The SEA method for free-surface problems with heat transfer and change of phase. Journal of Fluid Engineering, 185. pp. 227-236.

Phillips, T. N. and Williams, A. J. (1998) A semi-Lagrangian finite volume method for solving viscoelastic flow problems. In: Progress and Trends in Rheology V: Proceedings of the Fifth European Rheology Conference Portorož, Slovenia, September 6–11, 1998. Steinkopff-Verlag Heidelberg, pp. 299-300. ISBN 978-3-642-51064-9 (doi:10.1007/978-3-642-51062-5_139)

Phillips, T.N. and Williams, A.J. (2002) Comparison of creeping and inertial flow of an Oldroyd B fluid through planar and axisymmetric contractions. Journal of Non-Newtonian Fluid Mechanics, 108 (1-3). pp. 25-47. ISSN 0377-0257 (doi:10.1016/S0377-0257(02)00123-4)

Phillips, T.N. and Williams, A.J. (2001) Conservative semi-Lagrangian finite volume schemes. Numerical Methods for Partial Differential Equations, 17 (4). pp. 403-425. ISSN 0749-159X (Print), 1098-2426 (Online) (doi:10.1002/num.1019)

Phillips, T.N. and Williams, A.J. (2000) Semi-Lagrangian finite volume methods for viscoelastic flow problems. In: The Mathematics of Finite Elements and Applications X (MAFELAP 19). Elsevier Science Ltd., Kidlington, Oxford, pp. 335-344. ISBN 0080435688

Phillips, T.N. and Williams, A.J. (1999) Viscoelastic flow through a planar contraction using a semi-Lagrangian finite volume method. Journal of Non-Newtonian Fluid Mechanics, 87 (2-3). pp. 215-246. ISSN 0377-0257 (doi:10.1016/S0377-0257(99)00065-8)

Phillips, T.N. and Williams, A.J. (2000) A semi-Lagrangian finite volume method for Newtonian contraction flows. SIAM Journal on Scientific Computing, 22 (6). pp. 2152-2177. ISSN 1064-8275 (Print), 1095-7197 (Online) (doi:10.1137/S1064827599365288)

Plainiotis, S., Pericleous, K., Fisher, B.E.A. and Shier, L. (2005) Forward and inverse transport of particulate matter and gaseous pollutants affecting the region bordering the English Channel. In: International Conference on Modelling and Simulation, 2005. ACTA Press, Calgary, AB, Canada, pp. 164-169. ISBN 0-88986-496-9 (print) : 0-88986-498-5 (CD) ISSN 1925-8003 (doi:http://www.actapress.com/Content_of_Proceeding.aspx?proceedingid=290)

Plainiotis, S., Pericleous, K.A., Fisher, B.E.A. and Shier, L. (2005) Application of Lagrangian particle dispersion models to air quality assessment in the Trans-Manche Region of Nord-Pas-de-Calais (France) and Kent (Great Britain). In: Proceedings of the 10th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes. Harmonisation Conference, pp. 398-403. ISBN 9602331666

Plainiotis, S., Pericleous, K.A., Fisher, B.E.A. and Shier, L. (2005) Modelling high particulate matter and ozone episodes in the Trans-Manche region. In: 5th International Conference on Urban Air Quality, 29-31 Mar 2005, Valencia, Spain. (Unpublished)

Rafii-Tabar, H., Kamiyama, H. and Cross, Mark (1997) Molecular dynamics simulation of adsorption of Ag particles on a graphite substrate. Surface Science, 385 (1). pp. 187-199. ISSN 0039-6028 (doi:10.1016/S0039-6028(97)00262-8)

Rafii-Tabar, Hashem, Lu, Hua and Cross, Mark (1998) A multi-scale atomistic-continuum modelling of crack propagation in a two-dimensional macroscopic plate. Journal of Physics: Condensed Matter, 10 (11). pp. 2375-2387. ISSN 0953-8984 (Print), 1361-648X (Online) (doi:10.1088/0953-8984/10/11/003)

Reed, Joy, Parrott, Kevin and Lanfear, Tim (1996) Portability, predictability and performance for parallel computing: BSP in practice. Concurrency: Practice and Experience, 8 (10). pp. 799-812. ISSN 1040-3108 (Print), 1096-9128 (Online) (doi:10.1002/(SICI)1096-9128(199612)8:10<799::AID-CPE274>3.0.CO;2-7)

Rennolls, Keith, Zhang, Yong, Ramesh, Nadarajah, Chen, Anyue and Patel, Swatee (1998) Spatial models of pollution exposure from a road network: the effect on asthma. In: Barnett, Vic, Stein, Albert and Turkman, K. Feridun, (eds.) Statistical Aspects of Health and the Environment. Statistics for the Environment (4). Wiley-Blackwell, Chichester, UK, pp. 137-150. ISBN 9780471976455

Robinson, J.E., Hull, T.R., Lebek, K., Stec, A.A., Galea, Edwin R., Mahalingam, Arun, Jia, Fuchen, Patel, Mayur and Persson, H. (2007) Assessment of the impact of computed and measured fire environments on building evacuation using bench and real scale test data. Interflam 2007 11th International Fire Science and Engineering Conference. Interscience Communications, Greenwich, pp. 873-884. ISBN 9780954121693

Rodrigues, J.N., Johnson, S.P., Walshaw, C. and Cross, M. (2000) An automatable generic strategy for dynamic load balancing in parallel structured mesh CFD codes. In: Parallel Computational Fluid Dynamics 1999: Towards Teraflops, Optimization and Novel Formulations. North-Holland, Amsterdam, The Netherlands, pp. 345-353. ISBN 978044482851 (doi:10.1016/B978-044482851-4.50043-8)

Roy, A.A., Bojarevics, V. and Pericleous, K.A. (2011) Multi-physics modeling in the electromagnetic levitation and melting of reactive metals. In: COMSOL Conference: User Presentations and Proceedings CD. COMSOL, Inc., Burlington, MA, USA. ISBN 978-0-9839688-2-5

Shala, Mehmet, Patel, Mayur and Pericleous, Koulis A. (2006) Unstructured staggered mesh methods for fluid flow, heat transfer and phase change. WSEAS Transactions on Fluid Mechanics, 1 (5). pp. 431-438. ISSN 1790-5087

Shala, Mehmet, Pericleous, Koulis A. and Patel, Mayur (2007) Numerical simulation of incompressible flow problems using an unstructured staggered mesh method. Journal of Algorithms and Computational Technology, 1 (3). pp. 273-302. ISSN 1748-3018 (doi:10.1260/174830107782424066)

Shala, Mehmet, Pericleous, Koulis A. and Patel, Mayur (2006) A two dimensional unstructured staggered mesh method with special treatment of tangential velocity. In: 4th WSEAS International Conference on Fluid Mechanics and Aerodynamics, August 21-23, 2006, Elounda, Greece.

Sinclair, K.I., Goussetis, G., Desmulliez, M.P.Y., Sangster, A.J., Tilford, T., Bailey, C. and Parrott, A.K. (2008) Optimization of an open-ended microwave oven for microelectronics packaging. IEEE Transactions on Microwave Theory and Techniques, 56 (11). pp. 2635-2641. ISSN 0018-9480 (doi:10.1109/TMTT.2008.2005925)

Sinclair, K.I., Tilford, T., Desmulliez, M.Y.P., Goussetis, G., Bailey, C., Parrott, K. and Sangster, A.J. (2008) Open ended microwave oven for packaging. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, 2008 (MEMS/MOEMS 2008). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 16-20. ISBN 978-2-3550-0006-5 (doi:10.1109/DTIP.2008.4752943)

Sinclair, Keith I., Sangster, Alan J., Goussetis, George, Desmulliez, Marc P.Y., Tilford, Tim, Parrott, Kevin and Bailey, Christopher (2007) Open ended microwave oven for flip-chip assembly. 2007 European Microwave Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 620-623. ISBN 9782874870019

Sinclair, Keith I., Tilford, Tim, Goussetis, George, Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2008) Advanced microwave oven for rapid curing of encapsulant. 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 551-556. ISBN 978-1-4244-2814-4 (print) 978-1-4244-2813-7 (online) (doi:10.1109/ESTC.2008.4684409)

Slone, A.K., Bailey, C. and Cross, M. (2002) Dynamic solid mechanics using finite volume methods. Applied Mathematical Modelling, 27 (2). pp. 69-87. ISSN 0307-904X (doi:10.1016/S0307-904X(02)00060-4)

Slone, A.K., Croft, T.N., Williams, A.J. and Cross, M. (2002) Two fluid approach to high speed impact interaction amongst solid structures. In: Fifth World Congress on Computational Mechanics (WCCM V), 7-12 Jul 2002, Vienna, Austria.

Slone, A.K., Cross, M., Pericleous, K.A. and Bailey, C. (2001) A finite volume unstructured mesh approach to dynamic fluid-structure interaction: an assessment of the challenge of flutter analysis. In: Trends in Computational Structural Mechanics. International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 741-750. ISBN 8489925771

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Details of an integrated approach to three-dimensional dynamic fluid structure interaction. In: Fluid Structure Interaction. WIT Press, Southampton, UK, pp. 57-66. ISBN 1853128813 ISSN 1353-808x

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2001) Dynamic fluid-structure interaction using finite volume unstructured mesh procedures. In: European Conference on Computational Fluid Dynamics ECCOMAS CFD 2006 Proceedings. ECCOMAS. ISBN 0905091124

Slone, A.K., Pericleous, K., Bailey, C. and Cross, M. (2002) Dynamic fluid–structure interaction using finite volume unstructured mesh procedures. Computers and Structures, 80 (5-6). pp. 371-390. ISSN 0045-7949 (doi:10.1016/S0045-7949(01)00177-8)

Slone, A.K., Pericleous, K., Bailey, C., Cross, M. and Bennett, C. (2004) A finite volume unstructured mesh approach to dynamic fluid–structure interaction: an assessment of the challenge of predicting the onset of flutter. Applied Mathematical Modelling, 28 (2). pp. 211-239. ISSN 0307-904X (doi:10.1016/S0307-904X(03)00142-2)

Slone, A.K., Pericleous, K., Bailey, C., Cross, M. and Bennett, C. (2003) A finite volume unstructured mesh approach to dynamic fluid–structure interaction: an assessment of the challenge of predicting the onset of flutter. Applied Mathematical Modelling, 28 (2). pp. 211-239. ISSN 0307-904X (doi:10.1016/S0307-904X(03)00142-2)

Slone, A.K., Williams, A.J., Grossman, D., Croft, T.N. and Cross, M. (2003) A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems. In: NAFEMS World Congress 2003, 2003, Orlando, Florida, USA.

Slone, Avril, Fallah, Nosrat, Bailey, Christopher and Cross, Mark (2002) A finite volume approach to geometrically non-linear stress analysis. In: Finite volumes for complex applications III: problems and perspectives. Hermes Penton Science, London, UK, pp. 663-670. ISBN 9781903996348

Slone, Avril, Pericleous, Kyriacos A., Bailey, Christopher, Cross, Mark and Bennett, Christopher (1999) A finite volume approach to dynamic fluid structure interaction. In: Conference on the Mathematics of Finite Elements and Applications, 22-25 June 1999, Brunel Institute of Computational Mathematics, London, UK.

Soper, A. J., Walshaw, C. and Cross, M. (2004) A combined evolutionary search and multilevel optimisation approach to graph-partitioning. Journal of Global Optimization, 29 (2). pp. 225-241. ISSN 0925-5001 (Print), 1573-2916 (Online) (doi:10.1023/B:JOGO.0000042115.44455.f3)

Soper, Alan, Walshaw, Christopher and Cross, Mark (2000) A combined evolutionary search and multilevel approach to graph partitioning. GECCO-2000: proceedings of the Genetic and Evolutionary Computation Conference : a joint meeting of the Ninth International Conference on Genetic Algorithms (ICGA-2000) and the Fifth Annual Genetic Programming Conference (GP-2000), July 10-12, 2000, Las V. Morgan Kaufmann Publishers, San Francisco, USA, pp. 674-681. ISBN 978-1558607088

Soper, Alan, Walshaw, Christopher and Cross, Mark (2000) A combined evolutionary search and multilevel optimisation approach to graph partitioning. Technical Report. CMS Press, London, UK. (doi:Tech. Rep. 00/IM/58)

Stoyanov, S., Bailey, C. and Cross, M. (2001) Integrating computational mechanics and numerical optimization for the design of material properties in electronic packages. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 551-562. ISBN 0873395131

Stoyanov, S., Bailey, C. and Cross, M. (2002) Optimisation modelling for flip-chip solder joint reliability. Soldering and Surface Mount Technology, 14 (1). pp. 49-58. ISSN 0954-0911 (doi:10.1108/09540910210416477)

Stoyanov, S., Bailey, C., Lu, H. and Cross, M. (2002) Integrated computational mechanics and optimization for design of electronic components. In: Parmee, Ian C. and Hajela, Prabhat, (eds.) Optimization In Industry. Springer Verlag, pp. 57-71. ISBN 9781852338342

Strusevich, Nadezhda V., Pericleous, Koulis and Hughes, Michael (2002) Characterisation of weldpool shapes in the laser welding of thick plates. In: Mathematical Modelling of Weld Phenomena. Materials Modelling, 6 . Maney Publishing for the Institute of Materials, Minerals and Mining, London, England, UK, pp. 83-92. ISBN 9781902653563

Strusevitch, Nadia, Hughes, Michael, Bailey, Christopher and Djambazov, Georgi (2008) Numerical modelling of electrodeposition phenomena. 2nd Electronics System-Integration Technology Conference, Greenwich, UK, 1-4 September 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 281-286. ISBN 978-1-4244-2813-7 (Print) 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684362)

Taniguchi, S., Shimasaki, S., Park, J.S., Ueno, K. and Bojarevics, Valdis (2009) Prospect for EPM application to environmental technology. 6th International Conference on Electromagnetic Processing of Materials, EPM 2009. Forschungszentrum Dresden-Rossendorf, Dresden, Germany. ISBN 978-3-936104-65-3

Taylor, G.A., Bailey, C. and Cross, M. (2002) A vertex-based finite volume method applied to non-linear material problems in computational solid mechanics. International Journal for Numerical Methods in Engineering, 56 (4). pp. 507-529. ISSN 0029-5981 (Print), 1097-0207 (Online) (doi:10.1002/nme.574)

Taylor, Gareth A., Hughes, Michael, Strusevich, Nadia and Pericleous, Koulis (2002) Finite volume methods applied to the computational modelling of welding phenomena. Applied Mathematical Modelling, 26 (2). pp. 311-322. ISSN 0307-904X (doi:10.1016/S0307-904X(01)00063-4)

Taylor, S., Galea, E., Patel, M. and Petridis, M. (1996) SMARTFIRE: an intelligent fire field model. In: Conference Proceedings: Interflam '96: Seventh International Fire Science and Engineering Conference. Interscience Communications Ltd., Greenwich, London, UK, pp. 671-680. ISBN 0951632094

Taylor, S., Galea, E.R., Ewer, J., Patel, M.K., Petridis, M. and Knight, B. (1998) SMARTFIRE: an intelligent CFD-based fire model. CMS Press, Greenwich, London, UK. ISBN 1899991301

Taylor, S., Petridis, M., Knight, B., Ewer, J., Galea, E.R. and Patel, M. (1997) SMARTFIRE: an integrated computational fluid dynamics code and expert system for fire field modelling. In: Fire Safety Science: Proceedings of the Fifth International Symposium. International Association for Fire Safety Science, Greenwich, London, UK, pp. 1285-1296. ISBN 4990062555 (doi:10.3801/IAFSS.FSS.5-1285)

Thorpe, S.J., Patel, S.P. and Simonds, L.M. (2003) The relationship between disgust sensitivity, anxiety and obsessions. Behaviour Research and Therapy, 41 (12). pp. 1397-1409. ISSN 0005-7967 (doi:10.1016/S0005-7967(03)00058-5)

Tilford, T., Ferenets, M., Morris, J.E., Krumme, A., Pavuluri, S., Rajaguru, P.R., Desmulliez, M.P.Y. and Bailey, C. (2010) Application of particle swarm optimisation to evaluation of polymer cure kinetics models. Journal of Algorithms & Computational Technology, 4 (1). pp. 121-146. ISSN 1748-3018 (doi:10.1260/1748-3018.4.1.121)

Tilford, T., Parrott, A.K., Bailey, C. and Pericleous, K.A. (2008) Multiphysics simulation of microwave processing using a multidomain coupled solver approach. In: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008). International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain. ISBN 978-84-96736-55-9

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical analysis of thermal stresses induced during VFM encapsulant curing. In: 31st International Spring Seminar on Electronics Technology, 2008. ISSE '08. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 348-353. ISBN 978-1-4244-3972-0 (doi:10.1109/ISSE.2008.5276666)

Tilford, T., Sinclair, K.I., Goussetis, G., Bailey, C., Desmulliez, M.P.Y., Parrott, A.K. and Sangster, A.J. (2008) Numerical simulation of encapsulant curing within a variable frequency microwave processing system. In: Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2008. EuroSimE 2008. International Conference on. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 447-454. ISBN 978-1-4244-2127-5 (doi:10.1109/ESIME.2008.4525086)

Tilford, Tim, Baginski, E., Kelder, J., Pericleous, Koulis A. and Parrott, Kevin (2006) Microwave modeling and validation in food applications. Annual microwave heating symposium (40th). pp. 208-212. ISSN 1070-0129

Tilford, Tim, Baginski, Ed, Kelder, Jasper, Parrott, Kevin and Pericleous, Koulis A. (2007) Microwave modelling and validation in food thawing applications. Journal of Microwave Power & Electromagnetic Energy, 41 (4). pp. 30-45. ISSN 0832-7823

Tilford, Tim, Bailey, Christopher, Parrott, Kevin, Rizvi, M.J., Yin, Chunyan, Sinclair, Keith I. and Desmulliez, Marc P.Y. (2008) Impact of assembly process technologies on electronic packaging materials. International Conference on Electronic Packaging Technology & High Density Packaging, 2008. ICEPT-HDP 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-6. ISBN 978-1-4244-2739-0 (online) 978-1-4244-2740-6 (print) (doi:10.1109/ICEPT.2008.4607039)

Tilford, Tim, Pavuluri, S., Bailey, Christopher and Desmulliez, Marc P.Y. (2009) On variable frequency microwave processing of heterogeneous chip-on-board assemblies. International Conference on Electronic Packaging Technology & High Density Packaging, 2009. ICEPT-HDP '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 927-931. ISBN 978-1-4244-4659-9 (doi:10.1109/ICEPT.2009.5270558)

Tilford, Tim, Sinclair, Keith I., Bailey, Christopher, Desmulliez, Marc P.Y., Goussetis, George, Parrott, Kevin and Sangster, Alan J. (2007) Multiphysics simulation of microwave curing in micro-electronics packaging applications. Soldering & Surface Mount Technology, 19 (3). pp. 26-33. ISSN 0954-0911 (doi:10.1108/09540910710843757)

Tilford, Tim, Sinclair, Keith I., Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2007) Coupled FDTD-FVM simulation of microwave heating of polymer materials for micro-systems packaging applications. Annual microwave heating symposium (41st). pp. 7-11. ISSN 1070-0129

Tilford, Tim, Sinclair, Keith I., Goussetis, George, Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2008) Comparison of encapsulant curing with convention and microwave systems. 33rd IEEE/CPMT International Electronic Manufacturing Technology Symposium (IEMT), 2008. IEEE, Piscataway, NJ, USA. ISBN 9781424433926 (print) 9781424433933 (electronic) (doi:10.1109/IEMT.2008.5507869)

Tilford, Tim, Sinclair, Keith I., Goussetis, George, Bailey, Christopher, Desmulliez, Marc P.Y., Parrott, Kevin and Sangster, Alan J. (2007) Variable frequency microwave curing of polymer materials in microelectronics packaging applications. 2007 9th Electronics Packaging Technology Conference. Electronics Packaging Technology Conference Proceedings . Institute of Electrical and Electronics Engineers, Inc., New York, pp. 791-796. ISBN 9781424413232 (doi:10.1109/EPTC.2007.446975)

Tsirkas, S.A., Papanikos, P., Pericleous, K., Strusevitch, N., Boitout, F. and Bergheau, J.M. (2003) Evaluation of distortions in laser welded shipbuilding parts using local-global finite element approach. Science and Technology of Welding and Joining, 8 (2). pp. 79-88. ISSN 1362-1718 (Print), 1743-2936 (Online) (doi:10.1179/136217103225010899)

Tzanakis, I, Lebon, G S B, Eskin, D G and Pericleous, K (2015) Comparison of cavitation intensity in water and in molten aluminium using a high-temperature cavitometer. Journal of Physics: Conference Series, 656 (1):012120. pp. 1-4. ISSN 1742-6588 (Print), 1742-6596 (Online) (doi:10.1088/1742-6596/656/1/012120)

Tzanakis, I, Lebon, Gerard S B, Eskin, D.G. and Pericleous, Kyriacos A (2015) Effect of input power and temperature on the cavitation intensity during the ultrasonic treatment of molten aluminium. In: Transactions of the Indian Institute of Metals. Springer India, pp. 1023-1026. ISSN 0972-2815 (Print), 0975-1645 (Online) (doi:10.1007/s12666-015-0639-0)

Tzanakis, I., Hodnett, M., Eskin, D.G. and Lebon, B. (2014) Advanced calibration of a high-temperature cavitometer. In: 14th Meeting of the European Sonochemistry Society (ESS14), 2-6- Jun 2014, Université d'Avignon et des Pays de Vaucluse, Avignon, France.

Tzanakis, I., Hodnett, M., Lebon, G.S.B., Dezhkunov, N. and Eskin, D.G. (2016) Calibration and performance assessment of an innovative high-temperature cavitometer. Sensors and Actuators A: Physical, 240. pp. 57-69. ISSN 0924-4247 (doi:10.1016/j.sna.2016.01.024)

Tzanakis, I., Lebon, G.S.B., Eskin, D.G. and Pericleous, K. (2015) Investigation of the factors influencing cavitation intensity during the ultrasonic treatment of molten aluminium. Materials and Design, 90. 979 - 983. ISSN 0261-3069 (doi:10.1016/j.matdes.2015.11.010)

Tzanakis, I., Lebon, Gerard S B, Eskin, D. G. and Pericleous, Kyriacos A (2015) Characterisation of the ultrasonic acoustic spectrum and pressure field in aluminium melt with an advanced cavitometer. Journal of Materials Processing Technology, 229. pp. 582-586. ISSN 0924-0136 (doi:10.1016/j.jmatprotec.2015.10.009)

Vardoulakis, Sotiris, Fisher, Bernard E.A., Gonzalez-Flesca, Norbert and Pericleous, Koulis (2002) Model sensitivity and uncertainty analysis using roadside air quality measurements. Atmospheric Environment, 36 (13). pp. 2121-2134. ISSN 1352-2310 (doi:10.1016/S1352-2310(02)00201-7)

Vardoulakis, Sotiris, Fisher, Bernard E.A., Pericleous, Koulis and Gonzalez-Flesca, Norbert (2002) Modelling air quality in street canyons: a review. Atmospheric Environment, 37 (2). pp. 155-182. ISSN 1352-2310 (doi:10.1016/S1352-2310(02)00857-9)

Vardoulakis, Sotiris, Gonzalez-Flesca, Norbert, Fisher, Bernard E.A. and Pericleous, Koulis (2005) Spatial variability of air pollution in the vicinity of a permanent monitoring station in central Paris. Atmospheric Environment, 39 (15). pp. 2725-2736. ISSN 1352-2310 (doi:10.1016/j.atmosenv.2004.05.067)

Versluis, A., Douglas, W.H., Cross, M. and Sakaguchi, R.L. (1996) Does an incremental filling technique reduce polymerization shrinkage stresses. Journal of Dental Research, 75 (3). pp. 871-878. ISSN 0022-0345 (Print), 1544-0591 (Online) (doi:10.1177/00220345960750030301)

Vince, Ivan and Patel, Mayur (2006) Explosion in fume cupboard damages several laboratories. Loss Prevention Bulletin, 187. pp. 6-8. ISSN 0260-9576

Voller, V.R., Mouchmov, A. and Cross, M. (2003) An explicit scheme for coupling temperature and concentration fields in solidification models. Applied Mathematical Modelling, 28 (1). pp. 79-94. ISSN 0307-904X (doi:10.1016/S0307-904X(03)00115-X)

Walshaw, C. and Cross, M. (2002) Dynamic mesh partitioning and load-balancing for parallel computational mechanics codes. In: Topping, B.H.V., (ed.) Computational Mechanics using High Performance Computing. Computational Science, Engineering & Technology (9). Saxe-Coburg Publications, Kippen, Stirling, Scotland, pp. 79-94. ISBN 1874672075 (doi:10.4203/csets.9.4)

Walshaw, C. and Cross, M. (2000) Mesh partitioning: a multilevel balancing and refinement algorithm. SIAM Journal on Scientific Computing, 22 (1). pp. 63-80. ISSN 1064-8275 (Print), 1095-7197 (Online) (doi:10.1137/S1064827598337373)

Walshaw, C. and Cross, M. (2002) Parallel mesh partitioning on distributed memory systems. In: Topping, B.H.V., (ed.) Computational Mechanics using High Performance Computing. Computational Science, Engineering & Technology (9). Saxe-Coburg Publications, Kippen, Stirling, Scotland, pp. 59-78. ISBN 1874672075 (doi:10.4203/csets.9.3)

Walshaw, C. and Cross, M. (2000) Parallel optimisation algorithms for multilevel mesh partitioning. Parallel Computing, 26 (12). pp. 1635-1660. ISSN 0167-8191 (doi:10.1016/S0167-8191(00)00046-6)

Walshaw, C., Cross, M., Diekmann, R. and Schlimbach, F. (1999) Multilevel mesh partitioning for optimising aspect ratio. In: Hernández, Vicente, Palma, José M.L.M. and Dongarra, Jack J., (eds.) Vector and Parallel Processing – VECPAR’98: Third International Conference, Porto, Portugal, June 21-23, 1998. Selected Papers and Invited Talks. Lecture Notes in Computer Science (1573). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 285-300. ISBN 9783540662280 (doi:10.1007/10703040_23)

Walshaw, C., Cross, M., Diekmann, R. and Schlimbach, F. (1999) Multilevel mesh partitioning for optimizing domain shape. The International Journal of High Performance Computing Applications, 13 (4). pp. 334-353. ISSN 1094-3420 (Print), 1741-2846 (Online) (doi:10.1177/109434209901300404)

Walshaw, C., Cross, M. and Everett, M. (1999) Mesh partitioning and load balancing for distributed memory parallel architectures. In: Topping, B.H.V., (ed.) Parallel and Distributed Processing for Computational Mechanics: Systems and Tools. Civil-Comp Press, Edinburgh, UK, pp. 110-123. ISBN 1-874672-03-2

Walshaw, C., Cross, M. and Everett, M.G. (1997) Parallel dynamic graph-partitioning for unstructured meshes. Journal of Parallel and Distributed Computing, 47 (2). pp. 102-108. ISSN 0743-7315 (doi:10.1006/jpdc.1997.1407)

Walshaw, C., Cross, M. and McManus, K. (2000) Multiphase mesh partitioning. Applied Mathematical Modelling, 25 (2). pp. 123-140. ISSN 0307-904X

Walshaw, C., Cross, M. and McManus, K. (2002) Multiphase mesh partitioning for parallel computational mechanics codes. In: Computational Science — ICCS 2002: International Conference Amsterdam, The Netherlands, April 21–24, 2002 Proceedings. Lecture Notes in Computer Science, II (2330). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 943-952. ISBN 9783540435938 ISSN 0302-9743 (doi:10.1007/3-540-46080-2_99)

Walshaw, Christopher and Cross, Mark (2007) JOSTLE: multilevel graph partitioning software: an overview. Mesh partitioning techniques and domain decomposition techniques. Saxe-Coburg Publications, Stirling, Scotland, UK, pp. 27-58. ISBN 9781874672296 (doi:10.4203/csets.17.2)

Walshaw, Christopher and Cross, Mark (2001) Multilevel mesh partitioning for heterogeneous communication networks. Future Generation Computer Systems, 17 (5). pp. 601-623. ISSN 0167-739X (doi:10.1016/S0167-739X(00)00107-2)

Wang, H., Djambazov, G., Pericleous, K., Harding, R.A. and Wickins, M. (2012) Numerical modelling of tilt casting process for γ-TiAl alloys. International Journal of Cast Metals Research, 25 (2). pp. 65-74. ISSN 1364-0461 (Print), 1743-1336 (Online) (doi:10.1179/1743133611Y.0000000024)

Wang, H., Djambazov, G., Pericleous, K.A., Harding, R.A. and Wickins, M. (2013) Numerical modelling of the tilt casting process for γ-TiAl alloys. Foundry Trade Journal International, 187 (3705). pp. 150-157. ISSN 1758-9789

Wang, Hong, Djambazov, G. and Pericleous, K.A. (2011) Numerical study of crucial parameters in tilt casting for titanium aluminides. China Foundry, 8 (3). pp. 274-281. ISSN 1672-6421 (doi:1672-6421(2011)03-274-08)

Wang, Hong, Djambazov, Georgi and Pericleous, Koulis (2013) Analysis of heat transfer through the casting-mould interface including gas-gap effect and application to TiAl castings. International Journal of Numerical Methods for Heat & Fluid Flow, 23 (4). pp. 707-724. ISSN 0961-5539 (doi:10.1108/09615531311323827)

Wang, Hong, Djambazov, Georgi, Pericleous, Koulis A., Harding, Richard A. and Wickins, Michael (2010) Modelling the tilt-casting process for the tranquil filling of titanium alloy turbine blades. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley and Sons, Inc. / The Minerals, Metals & Materials Society (TMS), Warrendale, PA, USA, pp. 53-60. ISBN 978-0-87339-742-1

Wang, Junye, Christakis, Nicholas, Patel, Mayur K., Cross, Mark and Leaper, Mark C. (2004) A computational model of coupled heat and moisture transfer with phase change in granular sugar during varying environmental conditions. Numerical Heat Transfer, Part A: Applications, 45 (8). pp. 751-776. ISSN 1040-7782 (Print), 1521-0634 (Online) (doi:10.1080/10407780490424280)

Wang, Meiqing, Huang, Zhehuang and Lai, Choi-Hong (2005) Matching search in fractal video compression and its parallel implementation in distributed computing environments. Applied Mathematical Modelling, 30 (8). pp. 677-687. ISSN 0307-904X (doi:10.1016/j.apm.2005.05.018)

Wang, Meiqing and Lai, Choi-Hong (2008) Concise introduction to image processing using C++. Numerical Analysis and Scientific Computing Series . Chapman & Hall/CRC Press, Boca Raton, Florida , USA. ISBN 978-1-58488-897-0

Wang, Meiqing and Lai, Choi-Hong (2007) Grey video compression methods using fractals. International Journal of Computer Mathematics, 84 (11). pp. 1567-1590. ISSN 0020-7160 (doi:10.1080/00207160601178299)

Wang, Meiqing and Lai, Choi-Hong (2005) A hybrid fractal video compression method. Computers & Mathematics with Applications, 50 (3-4). pp. 611-621. ISSN 0898-1221 (doi:10.1016/j.camwa.2004.11.019)

Wang, Meiqing, Liu, Rong and Lai, Choi-Hong (2006) Adaptive partition and hybrid method in fractal video compression. Computers & Mathematics with Applications, 51 (11). pp. 1715-1726. ISSN 0898-1221 (doi:10.1016/j.camwa.2006.05.009)

Wang, Z., Jia, F., Galea, E.R., Patel, M.K. and Ewer, J. (2001) Simulating one of the CIB W14 round robin test cases using the SMARTFIRE fire field model. Fire Safety Journal, 36 (7). pp. 661-677. ISSN 0379-7112 (doi:10.1016/S0379-7112(01)00018-2)

Wang, Z.-K., Djambazov, G.S., Lai, C.-H. and Pericleous, K.A.. (2007) Numerical investigation of a source extraction technique based on an acoustic correction method. Computers & Mathematics with Applications, 55 (3). pp. 441-458. ISSN 0898-1221 (doi:10.1016/j.camwa.2004.08.017)

Wang, Z.K., Djambazov, G.S., Lai, C.-H. and Pericleous, K.A. (2004) An acoustic correction method for extracting sound signals. Computers & Mathematics with Applications, 47 (1). pp. 57-69. ISSN 0898-1221 (doi:10.1016/S0898-1221(04)90005-3)

Wang, Zhaozhi, Jia, Fuchen, Galea, Edwin R. and Patel, Mayur (2007) Predicting toxic species concentrations in a full-scale vitiated fire. Interflam 2007 11th International Fire Science and Engineering Conference. Interflam, 2 . Interscience Communications Ltd, London, pp. 1047-1058. ISBN 9780954121693

Wang, Zhaozhi, Jia, Fuchen, Galea, Edwin R., Patel, Mayur and Ewer, John (2007) Predicting HCl concentrations in fire enclosures using an HCl decay model coupled to a CFD-based fire field model. Fire and Materials, 31 (7). pp. 443-461. ISSN 0308-0501 (doi:10.1002/fam.942)

Wang, Zong-Kang, Djambazov, Georgi, Lai, Choi-Hong and Pericleous, Koulis A. (2007) Numerical simulation of flow-induced cavity noise in self-sustained oscillations. Computing and Visualization in Science, 10 (3). pp. 123-134. ISSN 1432-9360 (doi:10.1007/s00791-006-0039-4)

Wheeler, D., Bailey, C. and Cross, M. (2000) Numerical modelling and validation of Marangoni and surface tension phenomena using the finite volume method. International Journal for Numerical Methods in Fluids, 32 (8). pp. 1021-1047. ISSN 0271-2091 (Print), 1097-0363 (Online) (doi:10.1002/(SICI)1097-0363(20000430)32:8<1021::AID-FLD998>3.0.CO;2-1)

Wheeler, D., Bailey, C. and Cross, M. (1998) A computational modelling framework to predict macroscopic phenomena in solder joint formation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 212 (2). pp. 141-157. ISSN 0954-4054 (Print), 2041-2975 (Online) (doi:10.1243/0954405981515563)

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metal extrusion and forging processes. Journal of Materials Processing Technology, 125-6. pp. 573-582. ISSN 0924-0136 (doi:10.1016/S0924-0136(02)00401-6)

Williams, A.J., Croft, T.N. and Cross, M. (2001) Computational modelling of metals extrusion and forging processes. In: Computational Modeling of Materials, Minerals and Metals Processing [Conference Proceedings]. The Mineral, Metals and Materials Society (TMS), Warrendale, PA, USA, pp. 481-490. ISBN 0873395131

Williams, A.J., Croft, T.N. and Cross, M. (2002) Computational modelling of metals forming processes. In: The 5th International EASFORM Conference on Material Forming [Proceedings]. Akapit Publishing, Kraków, Poland, pp. 67-70. ISBN 8371080980

Williams, A.J., Croft, T.N. and Cross, M. (2003) Modeling of ingot development during the start-up phase of direct chill casting. Metallurgical and Materials Transactions B, 34 (5). pp. 727-734. ISSN 1073-5615 (Print), 1543-1916 (Online) (doi:10.1007/s11663-003-0042-9)

Williams, A.J., Slone, A.K., Croft, T.N. and Cross, M. (2003) A mixed Eulerian-Lagrangian approach for metal extrusion. In: Proceedings of the 6th ESAFORM Conference on Material Forming, 28-30 April 2003, Salerno, Italy. Nuova Ipsa Editore, Palermo, Italy, pp. 663-666. ISBN 8876762116

Williams, Alison J., Croft, T. Nicholas and Cross, Mark (2002) The application of free-surface techniques to metal forming processes. In: Finite Volumes for Complex Applications III: Problems and Perspectives. Hermes Penton Science, London, UK, pp. 841-848. ISBN 1903996341

Woon, Fei Ling, Knight, Brian, Petridis, Miltos, Chapelle, Pierre and Patel, Mayur (2004) Enhancing the usability of numerical models with case-based reasoning. Journal of Expert Update, 7 (2). pp. 17-20. ISSN 1465-4091

Woon, Fei Ling, Knight, Brian, Petridis, Miltos and Patel, Mayur (2005) CBE-conveyor: a case-based reasoning system to assist engineers in designing conveyor systems. In: Case-Based Reasoning Research and Development: 6th International Conference on Case-Based Reasoning, ICCBR 2005, Chicago, IL, USA, August 23-26, 2005. Proceedings. Lecture Notes in Computer Science (3620). Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, pp. 640-651. ISBN 9783540281740 (doi:10.1007/11536406_48)

Xia, Y., Häuser, J., Patel, M.K. and Cross, M. (2001) Feature-oriented grid topology design for aerospace configurations. In: Deutscher Luft- und Raumfahrtkongress 2001, 17-20 Sep 2001, Hamburg, Germany.

Xue, Xiangdong, Patel, Mayur, Kersaudy-Kerhoas, Maïwenn, Bailey, Christopher, Desmulliez, Marc P.Y. and Topham, David (2009) Effect of fluid dynamics and device mechanism on biofluid behaviour in microchannel systems: modelling biofluids in a microchannel biochip separator. International Conference on Electronic Packaging Technology & High Density Packaging, 2009. ICEPT-HDP '09. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 179-186. ISBN 978-1-4244-4659-9 (doi:10.1109/ICEPT.2009.5270767)

Xue, Xiangdong, Patel, Mayur K., Bailey, Chris, Kersaudy-Kerhoas, Maïwenn and Desmulliez, Marc P.Y. (2008) Challenges in modelling biofluids in microchannels. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 287-292. ISBN 978-1-4244-2814-4 (Print) 978-1-4244-2813-7 (Online) (doi:10.1109/ESTC.2008.4684363)

Yamani, Ahmed A. S. (1998) An intelligent question: answering system for natural language. PhD thesis, University of Greenwich.

Yao, Jun, Yao, Yufeng, Mason, Peter J. and Patel, Mayur (2009) Numerical simulation of heat transfer in rectangular microchannel. Advances in Applied Mathematics and Mechanics, 1 (2). pp. 231-241. ISSN 2070-0733 (Print), 2075-1354 (Online)

Yao, Jun, Yao, Yufeng, Patel, Mayur and Mason, Peter J. (2007) On Reynolds number and scaling effects in microchannel flows. The European Physical Journal Applied Physics, 37 (2). pp. 229-235. ISSN 1286-0042 (doi:10.1051/epjap:2007010)

Yuan, L., Djambazov, G., Pericleous, K. and Lee, P.D. (2007) Multiscale modelling of dendrite growth during vacuum arc remelting. In: LMPC 2007 Proceedings of the 2007 International Symposium on Liquid Metal Processing and Casting. LMPC, pp. 43-48.

Yuan, L., Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2009) Multiscale modeling of the onset of freckle formation during vacuum arc remelting. In: Lee, Peter D., Mitchell, Alec and Williamson, Rod, (eds.) International Symposium on Liquid Metal Processing and Casting - LMPC 2009. The Minerals, Metals & Materials Society, Warrendale, Pennsylvania, USA, pp. 39-46. ISBN 978-0-87339-743-8

Yuan, Lang, Lee, Peter D., Djambazov, Georgi and Pericleous, Koulis A. (2010) Three-dimensional simulation of the influence of convection on dendritic solidification. In: Modeling of Casting, Welding, and Advanced Solidification Processes - XII (MCWASP XII). John Wiley & Sons, Inc. / The Minerals, Metals & Materials Society, Warrendale, PA, USA, pp. 451-458. ISBN 978-0-87339-742-1 (hbk)

Zhao, Jun, Patel, Mayur and Knight, Brian (1996) A self-organising neural network for optimal grid distribution. CMS Paper S, 9 (6). CMS Press, London. ISBN 1899991115 (doi:978-1899991112)

This list was generated on Wed Oct 12 11:59:33 2016 BST.