(ICA)

Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 , Bailey, Christopher ORCID: 0000-0002-9438-3879 , Kay, Robert, Durairaj, Rajkumar, Hendriksen, Mike, Desmuilliez, Marc and Ekere, Ndy (2004) Assembly and reliability of isotropic conductive adhesives for fine pitch flip-chip applications. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

adhesives

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:https://doi.org/10.1016/j.matdes.2011.02.045)

ageing

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Al/SiC

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

alloy

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:https://doi.org/10.1007/s12540-013-5025-z)

aluminium

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:https://doi.org/10.1109/ICASTech.2011.6145164)

assembly lines

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

attenuation

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763635)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763615)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684351)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684512)

bonding

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:https://doi.org/10.1007/s12540-013-5025-z)

cement-based materials

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763635)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763615)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684351)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684512)

coefficient of thermal expansion

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

copper

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:https://doi.org/10.1109/ICASTech.2011.6145164)

cost

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

creep

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540911111120140)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540910810885705)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

density

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

design of experiments

Mallik, Sabuj and Ekere, Ndy (2011) Investigating the effects of area ratio and aspect ratio on stencil printing process used in the electronics assembly line. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

diffraction experiments

Hoo, Nick, Jackson, Gavin, Hendriksen, Mike, Lu, Hua ORCID: 0000-0002-4392-6562 , Durairaj, Rajkumar, Bailey, Chris ORCID: 0000-0002-9438-3879 , Ekere, Ndy and Wright, Jonathon (2004) In-situ synchrotron x-ray diffraction during melting and solidification of a lead-free solder paste. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

elastic and plastic behaviour

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:https://doi.org/10.1016/j.matdes.2011.02.045)

electronic control unit

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:https://doi.org/10.1016/j.applthermaleng.2010.09.023)

electronic materials

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:https://doi.org/10.1007/s12540-013-5025-z)

electronics manufacturing

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

electronics packaging

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:https://doi.org/10.1109/ESTC.2006.280131)

emulsions

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417065)

flip chip

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:https://doi.org/10.1063/1.3552519)

flip-chip assemblies

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

flip-chip assembly

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 , Bailey, Christopher ORCID: 0000-0002-9438-3879 , Kay, Robert, Durairaj, Rajkumar, Hendriksen, Mike, Desmuilliez, Marc and Ekere, Ndy (2004) Assembly and reliability of isotropic conductive adhesives for fine pitch flip-chip applications. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

flip-chip assembly applications

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684527)

flow

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417065)

flux

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540911111120140)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540910810885705)

heat sink

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

heat sink geometry

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:https://doi.org/10.1109/ICASTech.2011.6145164)

industrial production

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

inter-metallic compounds

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:https://doi.org/10.1109/ESTC.2006.280131)

interface materials

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

isotropic conductive adhesives

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 , Bailey, Christopher ORCID: 0000-0002-9438-3879 , Kay, Robert, Durairaj, Rajkumar, Hendriksen, Mike, Desmuilliez, Marc and Ekere, Ndy (2004) Assembly and reliability of isotropic conductive adhesives for fine pitch flip-chip applications. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

lead

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540911111120140)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

lead-free solder pastes

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

lead-free soldering

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:https://doi.org/10.1063/1.3552519)

metal matrix composites

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:https://doi.org/10.1016/j.applthermaleng.2010.09.023)

microelectronics

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:https://doi.org/10.1109/ICASTech.2011.6145164)

microstructure

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763635)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763615)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684351)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684512)

miniaturization

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:https://doi.org/10.1063/1.3552519)

NDT

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:https://doi.org/10.1016/j.matdes.2011.02.045)

non-destructive testing

Amalu, Emeka H., Ekere, Ndy and Mallik, Sabuj (2011) Evaluation of rheological properties of lead-free solder pastes and their relationship with transfer efficiency during stencil printing process. Materials and Design, 32 (6). pp. 3189-3197. ISSN 0261-3069 (doi:https://doi.org/10.1016/j.matdes.2011.02.045)

nonlinear flow

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:https://doi.org/10.1007/s11665-012-0360-7)

particle size measurement

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540911111120140)

particles

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:https://doi.org/10.1023/A:1023929119055)

printing performance

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:https://doi.org/10.1109/EPTC.2009.5416423)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

printing processes

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

quality control

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540910810885705)

reflow profile

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:https://doi.org/10.1063/1.3552519)

reliability modelling

Stoyanov, Stoyan ORCID: 0000-0001-6091-1226 , Bailey, Christopher ORCID: 0000-0002-9438-3879 , Kay, Robert, Durairaj, Rajkumar, Hendriksen, Mike, Desmuilliez, Marc and Ekere, Ndy (2004) Assembly and reliability of isotropic conductive adhesives for fine pitch flip-chip applications. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)

rheological behaviour

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684527)

rheological behaviours

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:https://doi.org/10.1109/EPTC.2009.5416423)

rheological characteristics

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2008) Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly. Smart Processing Technology, 2. pp. 131-134.

rheological characterization

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:https://doi.org/10.1023/A:1023929119055)

rheology

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:https://doi.org/10.1007/s11665-012-0360-7)

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540911111120140)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684512)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540910810885705)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

scanning electron microscopy (SEM)

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:https://doi.org/10.1007/s12540-013-5025-z)

shear testing

Ekere, Ndy, Marks, Antony, Mallik, Sabuj and Durairaj, Rajkumar (2007) Effect of abandon time on print quality and rheological characteristics for lead-free solder pastes used for flip-chip assembly. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. Ieee/Cpmt International Electronics Manufacturing Technology Symposium . Institute of Electrical and Electronics Engineers, New York, USA, pp. 14-19. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417048)

simulation

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:https://doi.org/10.1023/A:1023929119055)

slip

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

solder joint

Bernasko, Peter, Mallik, Sabuj, Ekere, Ndy and Takyi, G. (2011) Evaluating the effect of pad sizes on the inter-metallic layer formation and growth for Sn-Ag-Cu solders on Cu metallization. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

solder joint integrity

Amalu, Emeka H., Lui, Y.T., Ekere, Ndy, Bhatti, R.S. and Takyi, G. (2011) Investigation of the effects of reflow profile parameters on lead-free solder bump volumes and joint integrity. In: AIP Conference Proceedings. American Institute of Physics, Melville, NY, USA, pp. 639-644. (doi:https://doi.org/10.1063/1.3552519)

solder joints

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763615)

Salam, B. and Ekere, Ndy (2006) A study of inter-metallic compounds (IMC) formation and growth in ultra-fine pitch Sn-Ag-Cu lead-free solder joints. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 988-994. ISBN 1424405521 (doi:https://doi.org/10.1109/ESTC.2006.280131)

solder paste

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:https://doi.org/10.1007/s11665-012-0360-7)

Mallik, Sabuj and Ekere, Ndy (2011) Investigating the effects of area ratio and aspect ratio on stencil printing process used in the electronics assembly line. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

Marks, Antony, Ekere, Ndy, Mallik, Sabuj and Bhatti, Rajinderpal (2011) Effect of particle size distribution (PSD) and flux medium on the creep recovery performance of lead-free solder pastes. Soldering and Surface Mount Technology, 23 (2). pp. 75-84. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540911111120140)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540910810885705)

Mallik, Sabuj, Ekere, Ndy, Durairaj, Rajkumar and Marks, Antony (2008) An investigation into the rheological properties of different lead-free solder pastes for surface mount applications. Soldering & Surface Mount Technology, 20 (2). pp. 3-10. ISSN 0954-0911 (doi:1108/09540910810871511)

Durairaj, Rajkumar, Ekere, Ndy, Salam, B., Jackson, G. and He, Da (2003) Monte Carlo study of solder paste microstructure and ultra-fine-pitch stencil printing. Journal of Materials Science: Materials in Electronics, 14 (8). pp. 501-506. ISSN 0957-4522 (doi:https://doi.org/10.1023/A:1023929119055)

solder pastes

Mallik, Sabuj, Thieme, Jens, Bauer, R., Ekere, Ndy, Seman, Anton, Bhatti, Rajinderpal and Durairaj, Rajkumar (2010) Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance. In: EPTC 2009 Proceedings of 2009 11th Electronics Packaging Technology Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 869-874. ISBN 978-1-4244-5099-2 (Print), 978-1-4244-5100-5 (e-ISBN) (doi:https://doi.org/10.1109/EPTC.2009.5416423)

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763615)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684512)

Mallik, Sabuj, Ekere, Ndy, Marks, Antony, Seman, Anton and Durairaj, Rajkumar (2008) Modelling of the time-dependent flow behaviour of lead-free solder pastes used for flip-chip assembly applications. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 1219-1224. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684527)

Ekere, Ndy, Durairaj, Rajkumar, Mallik, Sabuj, Marks, Antony, Bauer, R. and Winter, M. (2006) Rheological characterisation of new lead-free solder paste formulations for flip-chip assembly. ESTC 2006: 1st Electronics Systemintegration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, pp. 995-1000. ISBN 1424405521 (doi:https://doi.org/10.1109/ESTC.2006.280132)

soldering

Kumar, Santosh, Mallik, Sabuj, Ekere, Ndy and Jung, Jaepil (2013) Stencil Printing Behavior of Lead-Free Sn-3Ag-0.5Cu Solder Paste for Wafer Level Bumping for Sub-100 μm Size Solder Bumps. Metals and Materials International, 19 (5). pp. 1083-1090. ISSN 1598-9623 (Print), 2005-4149 (Online) (doi:https://doi.org/10.1007/s12540-013-5025-z)

stencil printing

Mallik, Sabuj and Ekere, Ndy (2011) Investigating the effects of area ratio and aspect ratio on stencil printing process used in the electronics assembly line. In: International Conference on Electronics Packaging (ICEP) 2011, 13-15 April 2011, Nara Prefectural New Public Hall, Nara, Japan.

stress

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763635)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes. 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, New York, USA, pp. 209-214. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684351)

Mallik, Sabuj, Schmidt, M., Bauer, R. and Ekere, Ndy (2008) Influence of solder paste components on rheological behaviour. In: 2008 2nd Electronics System-Integration Technology Conference. Institute of Electrical and Electronics Engineers, Inc., New York, USA, pp. 1135-1140. ISBN 9781424428137 (doi:https://doi.org/10.1109/ESTC.2008.4684512)

stretched exponential model

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

suspension

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:https://doi.org/10.1007/s11665-012-0360-7)

thermal conductive polymer

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:https://doi.org/10.1016/j.applthermaleng.2010.09.023)

thermal conductivity

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

thermal efficiency

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy, Mallik, Sabuj, Amalu, Emeka and Otiaba, Kenny (2011) Investigation of effects of heat sinks on thermal performance of microelectronic package. In: 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011): Proceedings. IEEE Conference Publications . Institute of Electrical and Electronic Engineers, Inc., Piscataway, NJ, USA, pp. 127-132. ISBN 9781467307581 (doi:https://doi.org/10.1109/ICASTech.2011.6145164)

thermal interface material

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:https://doi.org/10.1016/j.applthermaleng.2010.09.023)

thermal management

Mallik, Sabuj, Ekere, Ndy, Best, Chris and Bhatti, Raj (2011) Investigation of thermal management materials for automotive electronic control units. Applied Thermal Engineering, 31 (2-3). pp. 355-362. ISSN 1359-4311 (doi:https://doi.org/10.1016/j.applthermaleng.2010.09.023)

thermal management materials

Ekpu, Mathias, Bhatti, Raj, Ekere, Ndy and Mallik, Sabuj (2011) Advanced thermal management materials for heat sinks used in microelectronics. In: EMPC-2011: 18th European Microelectronics and Packaging Conference. IEEE Conference Publications . Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 1-8. ISBN 9781467306942

thixotropy

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Mallik, Sabuj, Ekere, Ndy, Seman, Anton and Durairaj, Rajkumar (2009) Modelling the time-dependent behaviour of solder pastes used in the electronics assembly applications. In: 11th Electronic Material and Packaging Conference (EMAP 2009), 1-2 Dec 2009, Penang, Malaysia. (Unpublished)

viscoelasticity

Mallik, Sabuj, Chan, Erica Hiu Laam and Ekere, Ndy (2012) Nonlinear Viscoelastic Characteristics of Sn-Ag-Cu Solder Pastes Used in Electronics Assembly Applications. Journal of Materials Engineering and Performance, 22 (4). pp. 1186-1193. ISSN 1059-9495 (Print), 1544-1024 (Online) (doi:https://doi.org/10.1007/s11665-012-0360-7)

viscosity

Durairaj, Rajkumar, Man, Lam Wai, Mallik, Sabuj and Ekere, Ndy (2009) Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes. In: 11th Electronic Material and Packaging Conference (EMAP), 1-3 Dec 2009, Penang, Malaysia. (Unpublished)

Seman, Anton, Ekere, Ndy, Ashenden, Stuart J., Mallik, Sabuj, Marks, Antony and Durairaj, Rajkumar (2008) In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1448-1454. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763635)

Durairaj, Rajkumar, Mallik, Sabuj, Seman, Anton, Marks, Antony and Ekere, Ndy (2008) Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process. 2008 10th Electronics Packaging Technology Conference (EPTC 2008). Institute of Electrical and Electronics Engineers, New York, USA, pp. 1328-1333. ISBN 9781424421176 (doi:https://doi.org/10.1109/EPTC.2008.4763615)

Durairaj, Rajkumar, Mallik, Sabuj and Ekere, Ndy (2008) Solder paste characterisation: towards the development of quality control (QC) tool. Soldering & Surface Mount Technology, 20 (3). pp. 34-40. ISSN 0954-0911 (doi:https://doi.org/10.1108/09540910810885705)

water

Ekere, Ndy, Mallik, Sabuj, Durairaj, Rajkumar and Marks, Antony (2007) A study of the rheological properties of lead free solder paste formulations used for flip-chip interconnection. 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE/CPM International Electronics Manufacturing Technology Symposium . IEEE, New York, USA, pp. 165-171. ISBN 9781424413355 (doi:https://doi.org/10.1109/IEMT.2007.4417065)

x-rays

Hoo, Nick, Jackson, Gavin, Hendriksen, Mike, Lu, Hua ORCID: 0000-0002-4392-6562 , Durairaj, Rajkumar, Bailey, Chris ORCID: 0000-0002-9438-3879 , Ekere, Ndy and Wright, Jonathon (2004) In-situ synchrotron x-ray diffraction during melting and solidification of a lead-free solder paste. In: TMS 2004 133rd TMS Annual Meeting & Exhibition 2004, 14-18 Mar 2004, Charlotte, North Carolina, USA. (Unpublished)