Skip navigation

Items where Author is "Douroumis, Dennis"

Items where Author is "Douroumis, Dennis"

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
3D printing Acryl-EZE Amorphous anionic polymers anticancer drugs Antihypertensive drugs Astree e-tongue atomic force microscopy bioadhesion bioconjugated quantum dots bioconjugation biodegradable polymers Bitter APIs caprolactam cationic drugs CDS quantum dots coating Combination therapy complexation Continuous manufacturing critical quality attributes crystals cytokines differential scanning calorimetry Dissolution rate Dissolutions DoE drug delivery drug delivery LNCap Apoptosis drug eluting stents Drug – excipient interactions dissolution drug-polymer interactions DVS e-tongue electron spin resonance electronic tongue electrostatic deposition encapsulation Energy dispersive X-ray Eudragit L100 Excipients extended release extrudates Extrusion fatty acids Films fluidity Formulation FT-IR Fusion deposition modelling Granulations Hot melt extrusion Hot-melt extrusion hot-melt extrusion (HME) technique ibuprofen ikjet printing implantation in silico in vitro In-line monitoring in-line NIR Indomethacin inkjet printing Inter-molecular interactions invasomes Jet dispensing liposomes matrix tablet mechanical properties medical devices melting point depression microencapsulation microneedles microparticles miscibility Modified release Molecular dispersion molecular dispersions molecular imaging molecular modelling Molecular solutions nanoparticles Near infrared spectroscopy near-infrared spectroscopy Oral strips orally disintegrating tables paclitaxel Paediatric medicines photoluminescence PLA platelet adhesion polyethylene oxide polymer combination polymers polymorphs Polynorphism printing Process analytical technology Process technology propranolol hydrochloride prostate cancer QbD quality by design quantum dot quantum mechanics Raman Raman mapping Reflectance release scale-up simvastatin sirolimus sodium carboxymethylcellulose Solid dispersions Solubility increase solubility parameter solubility parameters Specific surface area spray-drying stealth liposomes supercritical fluids Surface analysis synthesis targeting Taste assessment Taste masking temoporfin theophylline transdermal delivery transformation Transmission TS5000Z Twin screw variable-temperature XRPD water insoluble drugs Water sorption Wet granulation X-ray photon electron analysis zeolite BEA
Number of items: 170.

3D printing

Scoutaris, Nikolaos, Ross, Steven A. and Douroumis, Dennis (2017) 3D printed "Starmix" drug loaded dosage forms for paediatric applications. Pharmaceutical Research. ISSN 0724-8741 (Print), 1573-904X (Online) (In Press)

Acryl-EZE

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro-in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro–in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Amorphous

Maniruzzaman, Mohammed, Farias, Smirna, Slipper, Ian J., Boateng, Joshua S., Chowdhry, Babur Z., Nair, Arun and Douroumis, Dennis (2016) Development and optimization of ketoconazole oral strips by means of continuous hot-melt extrusion processing. Journal of Pharmacy and Pharmacology, 68 (7). pp. 890-900. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12569)

anionic polymers

Maniruzzaman, Mohammed, Morgan, David J., Mendham, Andrew P., Pang, Jiayun, Snowden, Martin J. and Douroumis, Dennis (2012) Drug–polymer intermolecular interactions in hot-melt extruded solid dispersions. International Journal of Pharmaceutics, 443 (1-2). pp. 199-208. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.11.048)

anticancer drugs

Uddin, Md Jasim, Scoutaris, Nicolaos, Klepetsanis, Pavlos, Chowdry, Babur, Prausnitz, Mark R. and Douroumis, Dennis (2015) Inkjet printing of transdermal microneedles for the delivery of anticancer agents. International Journal of Pharmaceutics, 494 (2). pp. 593-602. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.01.038)

Antihypertensive drugs

Scoutaris, Nicolaos, Malamatari, Maria, Letellier, Adrien and Douroumis, Dennis (2017) Jet dispensing of multi-layered films for the co-delivery of three antihypertensive agents. Drug Delivery and Translational Research, 8 (1). pp. 32-42. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-017-0430-3)

Astree e-tongue

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro-in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro–in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

atomic force microscopy

Onyesom, Ichioma, Lamprou, Dimitrios A., Sygellou, Lamprini, Owusu-Ware, Samuel K., Antonijevic, Milan, Chowdhry, Babur Z. and Douroumis, Dennis (2013) Sirolimus encapsulated liposomes for cancer therapy: physicochemical and mechanical characterization of sirolimus distribution within liposome bilayers. Molecular Pharmaceutics, 10 (11). pp. 4281-4293. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp400362v)

bioadhesion

Boateng, Joshua and Douroumis, Dennis (2012) Bioadhesion properties of polymeric films produced by hot-melt extrusion. In: Douroumis, Dennis, (ed.) Hot-Melt Extrusion: Pharmaceutical Applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK, pp. 177-200. ISBN 978-0-470-71118-7 (hbk), 978-1-1183-0787-8 (ebk)

bioconjugated quantum dots

Rajaram, Sudha, Bhujbal, Pranav, Slipper, Ian J., Favretto, Marco E. and Douroumis, Dennis (2013) Prostate cancer targeting with 7E11-C5.3-CdS bioconjugated quantum dots. Journal of Colloid Science and Biotechnology, 2 (1). pp. 34-39. ISSN 2164-9634 (Print), 2164-9642 (Online) (doi:10.1166/jcsb.2013.1036)

bioconjugation

Obonyo, Onyechi, Fisher, Emma, Edwards, Mark and Douroumis, Dennis (2010) Quantum dots synthesis and biological applications as imaging and drug delivery systems. Critical Reviews in Biotechnology, 30 (4). pp. 283-301. ISSN 0738-8551 (Print), 1549-7801 (Online) (doi:10.3109/07388551.2010.487184)

biodegradable polymers

Schafroth, Nina, Arpagaus, Cordin, Jadhava, Umesh Y., Makne, Sushil and Douroumis, Dennis (2012) Nano and microparticle engineering of water insoluble drugs using a novel spray-drying process. Colloids and Surfaces B: Biointerfaces, 90 (1). pp. 8-15. ISSN 0927-7765 (doi:10.1016/j.colsurfb.2011.09.038)

Bitter APIs

Maniruzzaman, Mohammed, Boateng, Joshua, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2013) A review on the taste masking of bitter APIs: Hot-melt extrusion (HME) evaluation. Drug Development and Industrial Pharmacy, 40 (2). pp. 145-156. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.3109/03639045.2013.804833)

caprolactam

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

cationic drugs

Maniruzzaman, Mohammed, Morgan, David J., Mendham, Andrew P., Pang, Jiayun, Snowden, Martin J. and Douroumis, Dennis (2012) Drug–polymer intermolecular interactions in hot-melt extruded solid dispersions. International Journal of Pharmaceutics, 443 (1-2). pp. 199-208. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.11.048)

CDS quantum dots

Slipper, Ian J., Bhujval, Pranav, Rajaram, Sudha, Favretto, Marco E. and Douroumis, Dennis (2010) A facile synthesis route of size tunable CdS quantum dots with high photoluminescence yield. Journal of Nanoscience and Nanotechnology, 10 (9). pp. 5899-5902. ISSN 1550-7033 (Print), 1550-7041 (Online) (doi:10.1166/jnn.2010.2548)

coating

Nukala, Ravi Kumar, Boyapally, Harikrishna, Slipper, Ian J., Mendham, Andrew P. and Douroumis, Dennis (2009) The application of electrostatic dry powder deposition technology to coat drug-eluting stents. Pharmaceutical Research, 27 (1). pp. 72-81. ISSN 0724-8741 (Print), 1573-904X (Online) (doi:10.1007/s11095-009-0008-y)

Combination therapy

Scoutaris, Nicolaos, Malamatari, Maria, Letellier, Adrien and Douroumis, Dennis (2017) Jet dispensing of multi-layered films for the co-delivery of three antihypertensive agents. Drug Delivery and Translational Research, 8 (1). pp. 32-42. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-017-0430-3)

complexation

Douroumis, Dennis (2011) Orally disintegrating dosage forms and taste-masking technologies; 2010. Expert Opinion on Drug Delivery, 8 (5). pp. 665-675. ISSN 1742-5247 (Print), 1744-7593 (Online) (doi:10.1517/17425247.2011.566553)

Continuous manufacturing

Maniruzzaman, Mohammed, Farias, Smirna, Slipper, Ian J., Boateng, Joshua S., Chowdhry, Babur Z., Nair, Arun and Douroumis, Dennis (2016) Development and optimization of ketoconazole oral strips by means of continuous hot-melt extrusion processing. Journal of Pharmacy and Pharmacology, 68 (7). pp. 890-900. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12569)

critical quality attributes

Islam, Muhammad T., Maniruzzaman, Mohammed, Halsey, Sheelagh A., Chowdhry, Babur Z. and Douroumis, Dennis (2014) Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach. Drug Delivery and Translational Research, 4 (4). pp. 377-387. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-014-0197-8)

crystals

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

cytokines

Scoutaris, Nikolaos, Chai, Feng, Blandine, Maurel, Sobocinski, Jonathan, Zhao, Min, Moffat, Jonathan G., Craig, Duncan Q., Martel, Bernard, Blanchemain, Nicolas and Douroumis, Dennis (2016) Development and biological evaluation of Iinkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13 (1). pp. 125-133. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/acs.molpharmaceut.5b00570)

differential scanning calorimetry

Dragicevic-Curic, Nina, Friedrich, Manfred, Petersen, Silvia, Scheglmann, Dietrich, Douroumis, Dennis, Plass, Winfried and Fahr, Alfred (2011) Assessment of fluidity of different invasomes by electron spin resonance and differential scanning calorimetry. International Journal of Pharmaceutics, 412 (1-2). pp. 85-94. ISSN 0378-5173

Dissolution rate

Maniruzzaman, Mohammed, Ross, Steven A., Dey, Tumpa, Nair, Arun, Snowden, Martin J. and Douroumis, Dennis (2017) A quality by design (QbD) twin–screw extrusion wet granulation approach for processing water insoluble drugs. International Journal of Pharmaceutics, 526 (1-2). pp. 496-505. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2017.05.020)

Dissolutions

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom, Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. and Douroumis, Dennis (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.025)

DoE

Maniruzzaman, Mohammed, Ross, Steven A., Dey, Tumpa, Nair, Arun, Snowden, Martin J. and Douroumis, Dennis (2017) A quality by design (QbD) twin–screw extrusion wet granulation approach for processing water insoluble drugs. International Journal of Pharmaceutics, 526 (1-2). pp. 496-505. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2017.05.020)

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom, Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. and Douroumis, Dennis (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.025)

drug delivery

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

Fatouros, Dimitrios G., Douroumis, Dennis, Nikolakis, Vladimiros, Ntais, Spyridon, Moschovi, Anastasia Maria, Trivedi, Vivek, Khima, Bhavin, Roldo, Marta, Nazar, Hamde and Cox, Paul A. (2011) In vitro and in silico investigations of drug delivery via zeolite BEA. Journal of Materials Chemistry, 21 (21). pp. 7789-7794. ISSN 0959-9428 (Print), 1364-5501 (Online) (doi:10.1039/c1jm10204d)

Douroumis, Dennis (2011) Orally disintegrating dosage forms and taste-masking technologies; 2010. Expert Opinion on Drug Delivery, 8 (5). pp. 665-675. ISSN 1742-5247 (Print), 1744-7593 (Online) (doi:10.1517/17425247.2011.566553)

drug delivery LNCap Apoptosis

Akanda, Mushfiq H., Rai, Rajeev, Slipper, Ian J., Chowdhry, Babur Z., Lamprou, Dimitrios, Getti, Giulia and Douroumis, Dennis (2015) Delivery of retinoic acid to LNCap human prostate cancer cells using solid lipid nanoparticles. International Journal of Pharmaceutics, 493 (1-2). pp. 161-171. ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.07.042)

drug eluting stents

Scoutaris, Nikolaos, Chai, Feng, Blandine, Maurel, Sobocinski, Jonathan, Zhao, Min, Moffat, Jonathan G., Craig, Duncan Q., Martel, Bernard, Blanchemain, Nicolas and Douroumis, Dennis (2016) Development and biological evaluation of Iinkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13 (1). pp. 125-133. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/acs.molpharmaceut.5b00570)

Nukala, Ravi Kumar, Boyapally, Harikrishna, Slipper, Ian J., Mendham, Andrew P. and Douroumis, Dennis (2009) The application of electrostatic dry powder deposition technology to coat drug-eluting stents. Pharmaceutical Research, 27 (1). pp. 72-81. ISSN 0724-8741 (Print), 1573-904X (Online) (doi:10.1007/s11095-009-0008-y)

Drug – excipient interactions dissolution

Maniruzzaman, M., Ross, S.A., Islam, M.T, Scoutaris, N., Nair, A. and Douroumis, Dennis (2017) Increased dissolution rates of tranilast solid dispersions extruded with inorganic excipients. Drug Development and Industrial Pharmacy, 43 (6). pp. 947-957. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.1080/03639045.2017.1287716)

drug-polymer interactions

Maniruzzaman, Mohammed, Pang, Jiayun, Morgan, David J. and Douroumis, Dennis (2015) Molecular modelling as a predictive tool for the development of solid dispersions. Molecular Pharmaceutics, 12 (4). pp. 1040-1049. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp500510m)

DVS

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom, Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. and Douroumis, Dennis (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.025)

e-tongue

Maniruzzaman, Mohammed, Bonnefille, Marion, Aranyos, Attila, Snowden, Martin J. and Douroumis, Dennis (2013) An in-vivo and in-vitro taste masking evaluation of bitter melt-extruded drugs. Journal of Pharmacy and Pharmacology, 66 (2). pp. 323-337. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12169)

electron spin resonance

Dragicevic-Curic, Nina, Friedrich, Manfred, Petersen, Silvia, Scheglmann, Dietrich, Douroumis, Dennis, Plass, Winfried and Fahr, Alfred (2011) Assessment of fluidity of different invasomes by electron spin resonance and differential scanning calorimetry. International Journal of Pharmaceutics, 412 (1-2). pp. 85-94. ISSN 0378-5173

electronic tongue

Maniruzzaman, Mohammed, Boateng, Joshua S., Bonnefille, Marion, Arranyos, Attila, Mitchell, John C. and Douroumis, Dennis (2011) Taste masking of paracetamol by hot-melt extrusion: An in vitro and in vivo evaluation. European Journal of Pharmaceutics and Biopharmaceutics, 80 (2). pp. 433-442. ISSN 0939-6411 (doi:10.1016/j.ejpb.2011.10.019)

electrostatic deposition

Nukala, Ravi Kumar, Boyapally, Harikrishna, Slipper, Ian J., Mendham, Andrew P. and Douroumis, Dennis (2009) The application of electrostatic dry powder deposition technology to coat drug-eluting stents. Pharmaceutical Research, 27 (1). pp. 72-81. ISSN 0724-8741 (Print), 1573-904X (Online) (doi:10.1007/s11095-009-0008-y)

encapsulation

Schafroth, Nina, Arpagaus, Cordin, Jadhava, Umesh Y., Makne, Sushil and Douroumis, Dennis (2012) Nano and microparticle engineering of water insoluble drugs using a novel spray-drying process. Colloids and Surfaces B: Biointerfaces, 90 (1). pp. 8-15. ISSN 0927-7765 (doi:10.1016/j.colsurfb.2011.09.038)

Energy dispersive X-ray

Maniruzzaman, Mohammed, Farias, Smirna, Slipper, Ian J., Boateng, Joshua S., Chowdhry, Babur Z., Nair, Arun and Douroumis, Dennis (2016) Development and optimization of ketoconazole oral strips by means of continuous hot-melt extrusion processing. Journal of Pharmacy and Pharmacology, 68 (7). pp. 890-900. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12569)

Eudragit L100

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro-in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro–in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Excipients

Maniruzzaman, M., Ross, S.A., Islam, M.T, Scoutaris, N., Nair, A. and Douroumis, Dennis (2017) Increased dissolution rates of tranilast solid dispersions extruded with inorganic excipients. Drug Development and Industrial Pharmacy, 43 (6). pp. 947-957. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.1080/03639045.2017.1287716)

extended release

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

extrudates

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

Extrusion

Maniruzzaman, M., Ross, S.A., Islam, M.T, Scoutaris, N., Nair, A. and Douroumis, Dennis (2017) Increased dissolution rates of tranilast solid dispersions extruded with inorganic excipients. Drug Development and Industrial Pharmacy, 43 (6). pp. 947-957. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.1080/03639045.2017.1287716)

fatty acids

Trivedi, Vivek, Bhomia, Ruchir, Mitchell, John C., Coleman, Nichola J., Douroumis, Dennis and Snowden, Martin J. (2013) Study of the effect of pressure on melting behavior of saturated fatty acids in liquid or supercritical carbon dioxide. Journal of Chemical & Engineering Data, 58 (6). pp. 1861-1866. ISSN 0021-9568 (Print), 1520-5134 (Online) (doi:10.1021/je400260c)

Films

Scoutaris, Nicolaos, Malamatari, Maria, Letellier, Adrien and Douroumis, Dennis (2017) Jet dispensing of multi-layered films for the co-delivery of three antihypertensive agents. Drug Delivery and Translational Research, 8 (1). pp. 32-42. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-017-0430-3)

Boateng, Joshua and Douroumis, Dennis (2012) Bioadhesion properties of polymeric films produced by hot-melt extrusion. In: Douroumis, Dennis, (ed.) Hot-Melt Extrusion: Pharmaceutical Applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK, pp. 177-200. ISBN 978-0-470-71118-7 (hbk), 978-1-1183-0787-8 (ebk)

fluidity

Dragicevic-Curic, Nina, Friedrich, Manfred, Petersen, Silvia, Scheglmann, Dietrich, Douroumis, Dennis, Plass, Winfried and Fahr, Alfred (2011) Assessment of fluidity of different invasomes by electron spin resonance and differential scanning calorimetry. International Journal of Pharmaceutics, 412 (1-2). pp. 85-94. ISSN 0378-5173

Formulation

Maniruzzaman, Mohammed, Boateng, Joshua S., Snowden, Martin J. and Douroumis, Dennis (2012) A review of hot-melt extrusion: process technology to pharmaceutical products [Review article]. ISRN Pharmaceutics, 2012:436763. pp. 1-9. ISSN 2090-6145 (Print), 2090-6153 (Online) (doi:10.5402/2012/436763)

FT-IR

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

Fusion deposition modelling

Scoutaris, Nikolaos, Ross, Steven A. and Douroumis, Dennis (2017) 3D printed "Starmix" drug loaded dosage forms for paediatric applications. Pharmaceutical Research. ISSN 0724-8741 (Print), 1573-904X (Online) (In Press)

Granulations

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom, Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. and Douroumis, Dennis (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.025)

Hot melt extrusion

Scoutaris, Nikolaos, Ross, Steven A. and Douroumis, Dennis (2017) 3D printed "Starmix" drug loaded dosage forms for paediatric applications. Pharmaceutical Research. ISSN 0724-8741 (Print), 1573-904X (Online) (In Press)

Maniruzzaman, Mohammed, Boateng, Joshua, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2013) A review on the taste masking of bitter APIs: Hot-melt extrusion (HME) evaluation. Drug Development and Industrial Pharmacy, 40 (2). pp. 145-156. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.3109/03639045.2013.804833)

Douroumis, Dennis (ed.) (2012) Hot-Melt Extrusion: pharmaceutical applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK. ISBN 9780470711187

Maniruzzaman, Mohammed, Boateng, Joshua S., Snowden, Martin J. and Douroumis, Dennis (2012) A review of hot-melt extrusion: process technology to pharmaceutical products [Review article]. ISRN Pharmaceutics, 2012:436763. pp. 1-9. ISSN 2090-6145 (Print), 2090-6153 (Online) (doi:10.5402/2012/436763)

Hot-melt extrusion

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

Islam, Muhammad T., Maniruzzaman, Mohammed, Halsey, Sheelagh A., Chowdhry, Babur Z. and Douroumis, Dennis (2014) Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach. Drug Delivery and Translational Research, 4 (4). pp. 377-387. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-014-0197-8)

Maniruzzaman, Mohammed, Bonnefille, Marion, Aranyos, Attila, Snowden, Martin J. and Douroumis, Dennis (2013) An in-vivo and in-vitro taste masking evaluation of bitter melt-extruded drugs. Journal of Pharmacy and Pharmacology, 66 (2). pp. 323-337. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12169)

Boateng, Joshua and Douroumis, Dennis (2012) Bioadhesion properties of polymeric films produced by hot-melt extrusion. In: Douroumis, Dennis, (ed.) Hot-Melt Extrusion: Pharmaceutical Applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK, pp. 177-200. ISBN 978-0-470-71118-7 (hbk), 978-1-1183-0787-8 (ebk)

Maniruzzaman, Mohammed, Boateng, Joshua S., Bonnefille, Marion, Arranyos, Attila, Mitchell, John C. and Douroumis, Dennis (2011) Taste masking of paracetamol by hot-melt extrusion: An in vitro and in vivo evaluation. European Journal of Pharmaceutics and Biopharmaceutics, 80 (2). pp. 433-442. ISSN 0939-6411 (doi:10.1016/j.ejpb.2011.10.019)

hot-melt extrusion (HME) technique

Maniruzzaman, Mohammed, Morgan, David J., Mendham, Andrew P., Pang, Jiayun, Snowden, Martin J. and Douroumis, Dennis (2012) Drug–polymer intermolecular interactions in hot-melt extruded solid dispersions. International Journal of Pharmaceutics, 443 (1-2). pp. 199-208. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.11.048)

ibuprofen

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

ikjet printing

Uddin, Md Jasim, Scoutaris, Nicolaos, Klepetsanis, Pavlos, Chowdry, Babur, Prausnitz, Mark R. and Douroumis, Dennis (2015) Inkjet printing of transdermal microneedles for the delivery of anticancer agents. International Journal of Pharmaceutics, 494 (2). pp. 593-602. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.01.038)

implantation

Scoutaris, Nikolaos, Chai, Feng, Blandine, Maurel, Sobocinski, Jonathan, Zhao, Min, Moffat, Jonathan G., Craig, Duncan Q., Martel, Bernard, Blanchemain, Nicolas and Douroumis, Dennis (2016) Development and biological evaluation of Iinkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13 (1). pp. 125-133. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/acs.molpharmaceut.5b00570)

in silico

Fatouros, Dimitrios G., Douroumis, Dennis, Nikolakis, Vladimiros, Ntais, Spyridon, Moschovi, Anastasia Maria, Trivedi, Vivek, Khima, Bhavin, Roldo, Marta, Nazar, Hamde and Cox, Paul A. (2011) In vitro and in silico investigations of drug delivery via zeolite BEA. Journal of Materials Chemistry, 21 (21). pp. 7789-7794. ISSN 0959-9428 (Print), 1364-5501 (Online) (doi:10.1039/c1jm10204d)

in vitro

Fatouros, Dimitrios G., Douroumis, Dennis, Nikolakis, Vladimiros, Ntais, Spyridon, Moschovi, Anastasia Maria, Trivedi, Vivek, Khima, Bhavin, Roldo, Marta, Nazar, Hamde and Cox, Paul A. (2011) In vitro and in silico investigations of drug delivery via zeolite BEA. Journal of Materials Chemistry, 21 (21). pp. 7789-7794. ISSN 0959-9428 (Print), 1364-5501 (Online) (doi:10.1039/c1jm10204d)

In-line monitoring

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

in-line NIR

Islam, Muhammad T., Maniruzzaman, Mohammed, Halsey, Sheelagh A., Chowdhry, Babur Z. and Douroumis, Dennis (2014) Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach. Drug Delivery and Translational Research, 4 (4). pp. 377-387. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-014-0197-8)

Indomethacin

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

inkjet printing

Scoutaris, Nikolaos, Chai, Feng, Blandine, Maurel, Sobocinski, Jonathan, Zhao, Min, Moffat, Jonathan G., Craig, Duncan Q., Martel, Bernard, Blanchemain, Nicolas and Douroumis, Dennis (2016) Development and biological evaluation of Iinkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13 (1). pp. 125-133. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/acs.molpharmaceut.5b00570)

Inter-molecular interactions

Maniruzzaman, Mohammed, Boateng, Joshua, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2013) A review on the taste masking of bitter APIs: Hot-melt extrusion (HME) evaluation. Drug Development and Industrial Pharmacy, 40 (2). pp. 145-156. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.3109/03639045.2013.804833)

invasomes

Dragicevic-Curic, Nina, Friedrich, Manfred, Petersen, Silvia, Scheglmann, Dietrich, Douroumis, Dennis, Plass, Winfried and Fahr, Alfred (2011) Assessment of fluidity of different invasomes by electron spin resonance and differential scanning calorimetry. International Journal of Pharmaceutics, 412 (1-2). pp. 85-94. ISSN 0378-5173

Jet dispensing

Scoutaris, Nicolaos, Malamatari, Maria, Letellier, Adrien and Douroumis, Dennis (2017) Jet dispensing of multi-layered films for the co-delivery of three antihypertensive agents. Drug Delivery and Translational Research, 8 (1). pp. 32-42. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-017-0430-3)

Scoutaris, Nikolaos, Snowden, Martin and Douroumis, Dennis (2015) Taste masked thin films printed by jet dispensing. International Journal of Pharmaceutics, 494 (2). pp. 619-622. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.05.018)

liposomes

Dragicevic-Curic, Nina, Friedrich, Manfred, Petersen, Silvia, Scheglmann, Dietrich, Douroumis, Dennis, Plass, Winfried and Fahr, Alfred (2011) Assessment of fluidity of different invasomes by electron spin resonance and differential scanning calorimetry. International Journal of Pharmaceutics, 412 (1-2). pp. 85-94. ISSN 0378-5173

matrix tablet

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

mechanical properties

Onyesom, Ichioma, Lamprou, Dimitrios A., Sygellou, Lamprini, Owusu-Ware, Samuel K., Antonijevic, Milan, Chowdhry, Babur Z. and Douroumis, Dennis (2013) Sirolimus encapsulated liposomes for cancer therapy: physicochemical and mechanical characterization of sirolimus distribution within liposome bilayers. Molecular Pharmaceutics, 10 (11). pp. 4281-4293. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp400362v)

medical devices

Douroumis, Dennis (ed.) (2012) Hot-Melt Extrusion: pharmaceutical applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK. ISBN 9780470711187

melting point depression

Trivedi, Vivek, Bhomia, Ruchir, Mitchell, John C., Coleman, Nichola J., Douroumis, Dennis and Snowden, Martin J. (2013) Study of the effect of pressure on melting behavior of saturated fatty acids in liquid or supercritical carbon dioxide. Journal of Chemical & Engineering Data, 58 (6). pp. 1861-1866. ISSN 0021-9568 (Print), 1520-5134 (Online) (doi:10.1021/je400260c)

microencapsulation

Douroumis, Dennis (2011) Orally disintegrating dosage forms and taste-masking technologies; 2010. Expert Opinion on Drug Delivery, 8 (5). pp. 665-675. ISSN 1742-5247 (Print), 1744-7593 (Online) (doi:10.1517/17425247.2011.566553)

microneedles

Uddin, Md Jasim, Scoutaris, Nicolaos, Klepetsanis, Pavlos, Chowdry, Babur, Prausnitz, Mark R. and Douroumis, Dennis (2015) Inkjet printing of transdermal microneedles for the delivery of anticancer agents. International Journal of Pharmaceutics, 494 (2). pp. 593-602. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.01.038)

microparticles

Schafroth, Nina, Arpagaus, Cordin, Jadhava, Umesh Y., Makne, Sushil and Douroumis, Dennis (2012) Nano and microparticle engineering of water insoluble drugs using a novel spray-drying process. Colloids and Surfaces B: Biointerfaces, 90 (1). pp. 8-15. ISSN 0927-7765 (doi:10.1016/j.colsurfb.2011.09.038)

miscibility

Maniruzzaman, Mohammed, Pang, Jiayun, Morgan, David J. and Douroumis, Dennis (2015) Molecular modelling as a predictive tool for the development of solid dispersions. Molecular Pharmaceutics, 12 (4). pp. 1040-1049. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp500510m)

Modified release

Maniruzzaman, Mohammed, Boateng, Joshua, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2013) A review on the taste masking of bitter APIs: Hot-melt extrusion (HME) evaluation. Drug Development and Industrial Pharmacy, 40 (2). pp. 145-156. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.3109/03639045.2013.804833)

Molecular dispersion

Maniruzzaman, Mohammed, Boateng, Joshua, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2013) A review on the taste masking of bitter APIs: Hot-melt extrusion (HME) evaluation. Drug Development and Industrial Pharmacy, 40 (2). pp. 145-156. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.3109/03639045.2013.804833)

molecular dispersions

Maniruzzaman, Mohammed, Bonnefille, Marion, Aranyos, Attila, Snowden, Martin J. and Douroumis, Dennis (2013) An in-vivo and in-vitro taste masking evaluation of bitter melt-extruded drugs. Journal of Pharmacy and Pharmacology, 66 (2). pp. 323-337. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12169)

molecular imaging

Obonyo, Onyechi, Fisher, Emma, Edwards, Mark and Douroumis, Dennis (2010) Quantum dots synthesis and biological applications as imaging and drug delivery systems. Critical Reviews in Biotechnology, 30 (4). pp. 283-301. ISSN 0738-8551 (Print), 1549-7801 (Online) (doi:10.3109/07388551.2010.487184)

molecular modelling

Maniruzzaman, Mohammed, Pang, Jiayun, Morgan, David J. and Douroumis, Dennis (2015) Molecular modelling as a predictive tool for the development of solid dispersions. Molecular Pharmaceutics, 12 (4). pp. 1040-1049. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp500510m)

Molecular solutions

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

nanoparticles

Schafroth, Nina, Arpagaus, Cordin, Jadhava, Umesh Y., Makne, Sushil and Douroumis, Dennis (2012) Nano and microparticle engineering of water insoluble drugs using a novel spray-drying process. Colloids and Surfaces B: Biointerfaces, 90 (1). pp. 8-15. ISSN 0927-7765 (doi:10.1016/j.colsurfb.2011.09.038)

Obonyo, Onyechi, Fisher, Emma, Edwards, Mark and Douroumis, Dennis (2010) Quantum dots synthesis and biological applications as imaging and drug delivery systems. Critical Reviews in Biotechnology, 30 (4). pp. 283-301. ISSN 0738-8551 (Print), 1549-7801 (Online) (doi:10.3109/07388551.2010.487184)

Near infrared spectroscopy

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

near-infrared spectroscopy

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

Oral strips

Maniruzzaman, Mohammed, Farias, Smirna, Slipper, Ian J., Boateng, Joshua S., Chowdhry, Babur Z., Nair, Arun and Douroumis, Dennis (2016) Development and optimization of ketoconazole oral strips by means of continuous hot-melt extrusion processing. Journal of Pharmacy and Pharmacology, 68 (7). pp. 890-900. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12569)

orally disintegrating tables

Douroumis, Dennis (2011) Orally disintegrating dosage forms and taste-masking technologies; 2010. Expert Opinion on Drug Delivery, 8 (5). pp. 665-675. ISSN 1742-5247 (Print), 1744-7593 (Online) (doi:10.1517/17425247.2011.566553)

paclitaxel

Scoutaris, Nikolaos, Chai, Feng, Blandine, Maurel, Sobocinski, Jonathan, Zhao, Min, Moffat, Jonathan G., Craig, Duncan Q., Martel, Bernard, Blanchemain, Nicolas and Douroumis, Dennis (2016) Development and biological evaluation of Iinkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13 (1). pp. 125-133. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/acs.molpharmaceut.5b00570)

Paediatric medicines

Scoutaris, Nikolaos, Ross, Steven A. and Douroumis, Dennis (2017) 3D printed "Starmix" drug loaded dosage forms for paediatric applications. Pharmaceutical Research. ISSN 0724-8741 (Print), 1573-904X (Online) (In Press)

photoluminescence

Slipper, Ian J., Bhujval, Pranav, Rajaram, Sudha, Favretto, Marco E. and Douroumis, Dennis (2010) A facile synthesis route of size tunable CdS quantum dots with high photoluminescence yield. Journal of Nanoscience and Nanotechnology, 10 (9). pp. 5899-5902. ISSN 1550-7033 (Print), 1550-7041 (Online) (doi:10.1166/jnn.2010.2548)

PLA

Scoutaris, Nikolaos, Chai, Feng, Blandine, Maurel, Sobocinski, Jonathan, Zhao, Min, Moffat, Jonathan G., Craig, Duncan Q., Martel, Bernard, Blanchemain, Nicolas and Douroumis, Dennis (2016) Development and biological evaluation of Iinkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13 (1). pp. 125-133. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/acs.molpharmaceut.5b00570)

platelet adhesion

Nukala, Ravi Kumar, Boyapally, Harikrishna, Slipper, Ian J., Mendham, Andrew P. and Douroumis, Dennis (2009) The application of electrostatic dry powder deposition technology to coat drug-eluting stents. Pharmaceutical Research, 27 (1). pp. 72-81. ISSN 0724-8741 (Print), 1573-904X (Online) (doi:10.1007/s11095-009-0008-y)

polyethylene oxide

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

polymer combination

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

polymers

Douroumis, Dennis (ed.) (2012) Hot-Melt Extrusion: pharmaceutical applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK. ISBN 9780470711187

polymorphs

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

Polynorphism

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

printing

Scoutaris, Nikolaos, Snowden, Martin and Douroumis, Dennis (2015) Taste masked thin films printed by jet dispensing. International Journal of Pharmaceutics, 494 (2). pp. 619-622. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.05.018)

Process analytical technology

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

Islam, Muhammad T., Maniruzzaman, Mohammed, Halsey, Sheelagh A., Chowdhry, Babur Z. and Douroumis, Dennis (2014) Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach. Drug Delivery and Translational Research, 4 (4). pp. 377-387. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-014-0197-8)

Process technology

Maniruzzaman, Mohammed, Boateng, Joshua S., Snowden, Martin J. and Douroumis, Dennis (2012) A review of hot-melt extrusion: process technology to pharmaceutical products [Review article]. ISRN Pharmaceutics, 2012:436763. pp. 1-9. ISSN 2090-6145 (Print), 2090-6153 (Online) (doi:10.5402/2012/436763)

propranolol hydrochloride

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

prostate cancer

Rajaram, Sudha, Bhujbal, Pranav, Slipper, Ian J., Favretto, Marco E. and Douroumis, Dennis (2013) Prostate cancer targeting with 7E11-C5.3-CdS bioconjugated quantum dots. Journal of Colloid Science and Biotechnology, 2 (1). pp. 34-39. ISSN 2164-9634 (Print), 2164-9642 (Online) (doi:10.1166/jcsb.2013.1036)

QbD

Maniruzzaman, Mohammed, Ross, Steven A., Dey, Tumpa, Nair, Arun, Snowden, Martin J. and Douroumis, Dennis (2017) A quality by design (QbD) twin–screw extrusion wet granulation approach for processing water insoluble drugs. International Journal of Pharmaceutics, 526 (1-2). pp. 496-505. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2017.05.020)

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom, Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. and Douroumis, Dennis (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.025)

quality by design

Islam, Muhammad T., Maniruzzaman, Mohammed, Halsey, Sheelagh A., Chowdhry, Babur Z. and Douroumis, Dennis (2014) Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach. Drug Delivery and Translational Research, 4 (4). pp. 377-387. ISSN 2190-393X (Print), 2190-3948 (Online) (doi:10.1007/s13346-014-0197-8)

quantum dot

Obonyo, Onyechi, Fisher, Emma, Edwards, Mark and Douroumis, Dennis (2010) Quantum dots synthesis and biological applications as imaging and drug delivery systems. Critical Reviews in Biotechnology, 30 (4). pp. 283-301. ISSN 0738-8551 (Print), 1549-7801 (Online) (doi:10.3109/07388551.2010.487184)

quantum mechanics

Maniruzzaman, Mohammed, Pang, Jiayun, Morgan, David J. and Douroumis, Dennis (2015) Molecular modelling as a predictive tool for the development of solid dispersions. Molecular Pharmaceutics, 12 (4). pp. 1040-1049. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp500510m)

Raman

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom, Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. and Douroumis, Dennis (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.025)

Raman mapping

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

Reflectance

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

release

Uddin, Md Jasim, Scoutaris, Nicolaos, Klepetsanis, Pavlos, Chowdry, Babur, Prausnitz, Mark R. and Douroumis, Dennis (2015) Inkjet printing of transdermal microneedles for the delivery of anticancer agents. International Journal of Pharmaceutics, 494 (2). pp. 593-602. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.01.038)

scale-up

Douroumis, Dennis (ed.) (2012) Hot-Melt Extrusion: pharmaceutical applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK. ISBN 9780470711187

simvastatin

Scoutaris, Nikolaos, Chai, Feng, Blandine, Maurel, Sobocinski, Jonathan, Zhao, Min, Moffat, Jonathan G., Craig, Duncan Q., Martel, Bernard, Blanchemain, Nicolas and Douroumis, Dennis (2016) Development and biological evaluation of Iinkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13 (1). pp. 125-133. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/acs.molpharmaceut.5b00570)

sirolimus

Onyesom, Ichioma, Lamprou, Dimitrios A., Sygellou, Lamprini, Owusu-Ware, Samuel K., Antonijevic, Milan, Chowdhry, Babur Z. and Douroumis, Dennis (2013) Sirolimus encapsulated liposomes for cancer therapy: physicochemical and mechanical characterization of sirolimus distribution within liposome bilayers. Molecular Pharmaceutics, 10 (11). pp. 4281-4293. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp400362v)

sodium carboxymethylcellulose

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

Solid dispersions

Maniruzzaman, M., Ross, S.A., Islam, M.T, Scoutaris, N., Nair, A. and Douroumis, Dennis (2017) Increased dissolution rates of tranilast solid dispersions extruded with inorganic excipients. Drug Development and Industrial Pharmacy, 43 (6). pp. 947-957. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.1080/03639045.2017.1287716)

Maniruzzaman, Mohammed, Pang, Jiayun, Morgan, David J. and Douroumis, Dennis (2015) Molecular modelling as a predictive tool for the development of solid dispersions. Molecular Pharmaceutics, 12 (4). pp. 1040-1049. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp500510m)

Maniruzzaman, Mohammed, Morgan, David J., Mendham, Andrew P., Pang, Jiayun, Snowden, Martin J. and Douroumis, Dennis (2012) Drug–polymer intermolecular interactions in hot-melt extruded solid dispersions. International Journal of Pharmaceutics, 443 (1-2). pp. 199-208. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2012.11.048)

Solubility increase

Maniruzzaman, Mohammed, Boateng, Joshua S., Snowden, Martin J. and Douroumis, Dennis (2012) A review of hot-melt extrusion: process technology to pharmaceutical products [Review article]. ISRN Pharmaceutics, 2012:436763. pp. 1-9. ISSN 2090-6145 (Print), 2090-6153 (Online) (doi:10.5402/2012/436763)

solubility parameter

Maniruzzaman, Mohammed, Boateng, Joshua S., Bonnefille, Marion, Arranyos, Attila, Mitchell, John C. and Douroumis, Dennis (2011) Taste masking of paracetamol by hot-melt extrusion: An in vitro and in vivo evaluation. European Journal of Pharmaceutics and Biopharmaceutics, 80 (2). pp. 433-442. ISSN 0939-6411 (doi:10.1016/j.ejpb.2011.10.019)

solubility parameters

Douroumis, Dennis (ed.) (2012) Hot-Melt Extrusion: pharmaceutical applications. Advances in Pharmaceutical Technology . John Wiley & Sons, Ltd., Chichester, UK. ISBN 9780470711187

Specific surface area

Maniruzzaman, Mohammed, Ross, Steven A., Dey, Tumpa, Nair, Arun, Snowden, Martin J. and Douroumis, Dennis (2017) A quality by design (QbD) twin–screw extrusion wet granulation approach for processing water insoluble drugs. International Journal of Pharmaceutics, 526 (1-2). pp. 496-505. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2017.05.020)

spray-drying

Schafroth, Nina, Arpagaus, Cordin, Jadhava, Umesh Y., Makne, Sushil and Douroumis, Dennis (2012) Nano and microparticle engineering of water insoluble drugs using a novel spray-drying process. Colloids and Surfaces B: Biointerfaces, 90 (1). pp. 8-15. ISSN 0927-7765 (doi:10.1016/j.colsurfb.2011.09.038)

stealth liposomes

Onyesom, Ichioma, Lamprou, Dimitrios A., Sygellou, Lamprini, Owusu-Ware, Samuel K., Antonijevic, Milan, Chowdhry, Babur Z. and Douroumis, Dennis (2013) Sirolimus encapsulated liposomes for cancer therapy: physicochemical and mechanical characterization of sirolimus distribution within liposome bilayers. Molecular Pharmaceutics, 10 (11). pp. 4281-4293. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp400362v)

supercritical fluids

Trivedi, Vivek, Bhomia, Ruchir, Mitchell, John C., Coleman, Nichola J., Douroumis, Dennis and Snowden, Martin J. (2013) Study of the effect of pressure on melting behavior of saturated fatty acids in liquid or supercritical carbon dioxide. Journal of Chemical & Engineering Data, 58 (6). pp. 1861-1866. ISSN 0021-9568 (Print), 1520-5134 (Online) (doi:10.1021/je400260c)

Nukala, Ravi Kumar, Boyapally, Harikrishna, Slipper, Ian J., Mendham, Andrew P. and Douroumis, Dennis (2009) The application of electrostatic dry powder deposition technology to coat drug-eluting stents. Pharmaceutical Research, 27 (1). pp. 72-81. ISSN 0724-8741 (Print), 1573-904X (Online) (doi:10.1007/s11095-009-0008-y)

Surface analysis

Maniruzzaman, Mohammed, Farias, Smirna, Slipper, Ian J., Boateng, Joshua S., Chowdhry, Babur Z., Nair, Arun and Douroumis, Dennis (2016) Development and optimization of ketoconazole oral strips by means of continuous hot-melt extrusion processing. Journal of Pharmacy and Pharmacology, 68 (7). pp. 890-900. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12569)

synthesis

Slipper, Ian J., Bhujval, Pranav, Rajaram, Sudha, Favretto, Marco E. and Douroumis, Dennis (2010) A facile synthesis route of size tunable CdS quantum dots with high photoluminescence yield. Journal of Nanoscience and Nanotechnology, 10 (9). pp. 5899-5902. ISSN 1550-7033 (Print), 1550-7041 (Online) (doi:10.1166/jnn.2010.2548)

targeting

Obonyo, Onyechi, Fisher, Emma, Edwards, Mark and Douroumis, Dennis (2010) Quantum dots synthesis and biological applications as imaging and drug delivery systems. Critical Reviews in Biotechnology, 30 (4). pp. 283-301. ISSN 0738-8551 (Print), 1549-7801 (Online) (doi:10.3109/07388551.2010.487184)

Taste assessment

Maniruzzaman, Mohammed, Boateng, Joshua, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2013) A review on the taste masking of bitter APIs: Hot-melt extrusion (HME) evaluation. Drug Development and Industrial Pharmacy, 40 (2). pp. 145-156. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.3109/03639045.2013.804833)

Taste masking

Scoutaris, Nikolaos, Ross, Steven A. and Douroumis, Dennis (2017) 3D printed "Starmix" drug loaded dosage forms for paediatric applications. Pharmaceutical Research. ISSN 0724-8741 (Print), 1573-904X (Online) (In Press)

Scoutaris, Nikolaos, Snowden, Martin and Douroumis, Dennis (2015) Taste masked thin films printed by jet dispensing. International Journal of Pharmaceutics, 494 (2). pp. 619-622. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.05.018)

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro-in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro–in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Maniruzzaman, Mohammed, Bonnefille, Marion, Aranyos, Attila, Snowden, Martin J. and Douroumis, Dennis (2013) An in-vivo and in-vitro taste masking evaluation of bitter melt-extruded drugs. Journal of Pharmacy and Pharmacology, 66 (2). pp. 323-337. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12169)

Maniruzzaman, Mohammed, Boateng, Joshua, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2013) A review on the taste masking of bitter APIs: Hot-melt extrusion (HME) evaluation. Drug Development and Industrial Pharmacy, 40 (2). pp. 145-156. ISSN 0363-9045 (Print), 1520-5762 (Online) (doi:10.3109/03639045.2013.804833)

Maniruzzaman, Mohammed, Boateng, Joshua S., Snowden, Martin J. and Douroumis, Dennis (2012) A review of hot-melt extrusion: process technology to pharmaceutical products [Review article]. ISRN Pharmaceutics, 2012:436763. pp. 1-9. ISSN 2090-6145 (Print), 2090-6153 (Online) (doi:10.5402/2012/436763)

Maniruzzaman, Mohammed, Boateng, Joshua S., Bonnefille, Marion, Arranyos, Attila, Mitchell, John C. and Douroumis, Dennis (2011) Taste masking of paracetamol by hot-melt extrusion: An in vitro and in vivo evaluation. European Journal of Pharmaceutics and Biopharmaceutics, 80 (2). pp. 433-442. ISSN 0939-6411 (doi:10.1016/j.ejpb.2011.10.019)

Douroumis, Dennis (2011) Orally disintegrating dosage forms and taste-masking technologies; 2010. Expert Opinion on Drug Delivery, 8 (5). pp. 665-675. ISSN 1742-5247 (Print), 1744-7593 (Online) (doi:10.1517/17425247.2011.566553)

temoporfin

Dragicevic-Curic, Nina, Friedrich, Manfred, Petersen, Silvia, Scheglmann, Dietrich, Douroumis, Dennis, Plass, Winfried and Fahr, Alfred (2011) Assessment of fluidity of different invasomes by electron spin resonance and differential scanning calorimetry. International Journal of Pharmaceutics, 412 (1-2). pp. 85-94. ISSN 0378-5173

theophylline

Palmer, Dasha, Levina, Marina, Nokhodchi, Ali, Douroumis, Dennis, Farrell, Tom and Rajabi-Siahboomi, Ali (2011) The influence of sodium carboxymethylcellulose on drug release from polyethylene oxide extended release matrices. AAPS PharmSci Tech, 12 (3). pp. 862-871. ISSN 1530-9932 (Online) (doi:10.1208/s12249-011-9648-4)

transdermal delivery

Uddin, Md Jasim, Scoutaris, Nicolaos, Klepetsanis, Pavlos, Chowdry, Babur, Prausnitz, Mark R. and Douroumis, Dennis (2015) Inkjet printing of transdermal microneedles for the delivery of anticancer agents. International Journal of Pharmaceutics, 494 (2). pp. 593-602. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.01.038)

transformation

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

Transmission

Islam, Muhammad T., Scoutaris, Nikolaos, Maniruzzaman, Mohammed, Moradiya, Hiren G., Halsey, Sheelagh, Bradley, Michael, Chowdhry, Babur, Snowden, Martin and Douroumis, Dennis (2015) Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing. European Journal of Pharmaceutics and Biopharmaceutics, 96. pp. 106-116. ISSN 0939-6411 (Print), 1873-3441 (Online) (doi:10.1016/j.ejpb.2015.06.021)

TS5000Z

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro-in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-3573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Maniruzzaman, Mohammed and Douroumis, Dennis (2015) An in-vitro–in-vivo taste assessment of bitter drug: comparative electronic tongues study. Journal of Pharmacy and Pharmacology, 67 (1). pp. 43-55. ISSN 0022-573 (Print), 2042-7158 (Online) (doi:10.1111/jphp.12319)

Twin screw

Maniruzzaman, Mohammed, Nair, Arun, Renault, Maxcene, Nandi, Uttom, Scoutaris, Nicholaos, Farnish, Richard, Bradley, Mike, Snowden, Martin J. and Douroumis, Dennis (2015) Continuous twin-screw granulation for enhancing the dissolution of poorly water soluble drug. International Journal of Pharmaceutics Special Issue on "Continuous Manufacturing and Process Analytical Tools”, 496 (1). ISSN 0378-5173 (Print), 1873-3476 (Online) (doi:10.1016/j.ijpharm.2015.09.025)

variable-temperature XRPD

Maniruzzaman, Mohammed, Islam, Muhammad T., Moradiya, Hiren G., Halsey, Sheelagh A., Slipper, Ian J., Chowdhry, Babur Z., Snowden, Martin J. and Douroumis, Dennis (2014) Prediction of polymorphic transformations of paracetamol in solid dispersions. Journal of Pharmaceutical Sciences, 103 (6). pp. 1819-1828. ISSN 0022-3549 (Print), 1520-6017 (Online) (doi:10.1002/jps.23992)

water insoluble drugs

Scoutaris, Nikolaos, Snowden, Martin and Douroumis, Dennis (2015) Taste masked thin films printed by jet dispensing. International Journal of Pharmaceutics, 494 (2). pp. 619-622. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2015.05.018)

Water sorption

Maniruzzaman, Mohammed, Ross, Steven A., Dey, Tumpa, Nair, Arun, Snowden, Martin J. and Douroumis, Dennis (2017) A quality by design (QbD) twin–screw extrusion wet granulation approach for processing water insoluble drugs. International Journal of Pharmaceutics, 526 (1-2). pp. 496-505. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2017.05.020)

Wet granulation

Maniruzzaman, Mohammed, Ross, Steven A., Dey, Tumpa, Nair, Arun, Snowden, Martin J. and Douroumis, Dennis (2017) A quality by design (QbD) twin–screw extrusion wet granulation approach for processing water insoluble drugs. International Journal of Pharmaceutics, 526 (1-2). pp. 496-505. ISSN 0378-5173 (doi:10.1016/j.ijpharm.2017.05.020)

X-ray photon electron analysis

Onyesom, Ichioma, Lamprou, Dimitrios A., Sygellou, Lamprini, Owusu-Ware, Samuel K., Antonijevic, Milan, Chowdhry, Babur Z. and Douroumis, Dennis (2013) Sirolimus encapsulated liposomes for cancer therapy: physicochemical and mechanical characterization of sirolimus distribution within liposome bilayers. Molecular Pharmaceutics, 10 (11). pp. 4281-4293. ISSN 1543-8384 (Print), 1543-8392 (Online) (doi:10.1021/mp400362v)

zeolite BEA

Fatouros, Dimitrios G., Douroumis, Dennis, Nikolakis, Vladimiros, Ntais, Spyridon, Moschovi, Anastasia Maria, Trivedi, Vivek, Khima, Bhavin, Roldo, Marta, Nazar, Hamde and Cox, Paul A. (2011) In vitro and in silico investigations of drug delivery via zeolite BEA. Journal of Materials Chemistry, 21 (21). pp. 7789-7794. ISSN 0959-9428 (Print), 1364-5501 (Online) (doi:10.1039/c1jm10204d)

This list was generated on Thu Apr 19 22:49:59 2018 BST.