Skip navigation

Items where Author is "Deng, Tong"

Items where Author is "Deng, Tong"

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
additive manufacturing air induced segregation angle of repose architectural topology Attrition baseline tracking bench-scale testers biomass bipolar charge blending bond number breakage matrices Brookfield powder flow tester CA modelling caking strength carbon fibre structures Carbon nanotubes carbon-fibre-reinforced polymer (CFRP) cement flowability centrifugal tester charge hazards charge levels Charge measurement charge of solids charge polarity charge signal Classification and regression tree (CART) cohesive powders cohesiveness and bond comminution degradation assessments design criteria dimensional tolerance direct compression process Dusts dynamic time warping Electrical properties electrostatic electrostatic charge electrostatic charging electrostatic inductive sensor Ensemble model erosion erosion testers erosive wear Extreme learning machine (ELM) FEM-CFD fine powders fines contents flow function flow functions flowability formulated powders frequency domain analysis gas-blast tester granulated clay High strain rate high-speed impacts Humidity influence inductive charge sensor inductive sensor inverse design linear regression model Local model material handling process Mechanical properties metal target methodology Microstructures modelling Modes of flow new caking tester noise reduction number NURBS optimized design method packing fraction particle adhesion particle breakage particle degradation particle dynamics particle impact velocity particle properties particle shape particle size particle spin particulate clay particulate material Particulate materials pharmaceutical powders Physical properties plastic caking PM2.5 concentration prediction pneumatic conveying Pneumatic conveying characteristics pneumatic conveying systems pneumatic conveyors polyflow Polymer Composites polymer extrusion die Polymer–matrix composites powder powder blending Powder flowability powder spreading predicting prediction model preventing wear profile extrusion dies response surface methodology roasted coffee beans rolling segregation sampling segregation segregation index segregations in process shear cell tests signal restoration size and shape segregation Size influence small quantity of samples solids particle impacts sphericity sphericity ratio statistical analysis storage surface energy tester surface segregation time consolidation wavelet transform wood pellets
Number of items: 150.

additive manufacturing

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:https://doi.org/10.3390/pr11082276)

air induced segregation

Deng, Tong ORCID: 0000-0003-4117-4317 , Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

angle of repose

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

architectural topology

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

Attrition

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

baseline tracking

Jiang, Yang, Deng, Tong ORCID: 0000-0003-4117-4317 and Nasr, Karim ORCID: 0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:https://doi.org/10.1109/JSEN.2022.3162494)

bench-scale testers

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

biomass

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia.

bipolar charge

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

blending

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

bond number

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

breakage matrices

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

Brookfield powder flow tester

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

CA modelling

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

caking strength

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

carbon fibre structures

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

Carbon nanotubes

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

carbon-fibre-reinforced polymer (CFRP)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

cement flowability

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

centrifugal tester

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

charge hazards

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

charge levels

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

Charge measurement

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael Samuel, Armour-Chélu, David, Gorman, Terry and Kaialy, Waseem (2016) Evaluation studies of a sensing technique for electrostatic charge polarity of pharmaceutical particulates. IET Science Measurement and Technology, 10 (5). pp. 442-448. ISSN 1751-8822 (Print), 1751-8830 (Online) (doi:https://doi.org/10.1049/iet-smt.2015.0194)

charge of solids

Deng, Tong ORCID: 0000-0003-4117-4317 and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

charge polarity

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

charge signal

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:https://doi.org/10.1016/j.measen.2023.100757)

Classification and regression tree (CART)

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317 , He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

cohesive powders

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

cohesiveness and bond

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

comminution

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia.

degradation assessments

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

design criteria

Zhang, Guangdong ORCID: 0000-0003-0285-6745 , Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: 0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-019-04785-w)

dimensional tolerance

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

direct compression process

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

Dusts

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

dynamic time warping

Jiang, Yang, Deng, Tong ORCID: 0000-0003-4117-4317 and Nasr, Karim ORCID: 0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:https://doi.org/10.1109/JSEN.2022.3162494)

Electrical properties

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

electrostatic

Deng, Tong ORCID: 0000-0003-4117-4317 and Hussain, Tariq (2013) Taking charge. Solids & Bulk Handling. pp. 10-12.

electrostatic charge

Jiang, Yang, Deng, Tong ORCID: 0000-0003-4117-4317 and Nasr, Karim ORCID: 0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:https://doi.org/10.1109/JSEN.2022.3162494)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

electrostatic charging

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael Samuel, Armour-Chélu, David, Gorman, Terry and Kaialy, Waseem (2016) Evaluation studies of a sensing technique for electrostatic charge polarity of pharmaceutical particulates. IET Science Measurement and Technology, 10 (5). pp. 442-448. ISSN 1751-8822 (Print), 1751-8830 (Online) (doi:https://doi.org/10.1049/iet-smt.2015.0194)

electrostatic inductive sensor

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:https://doi.org/10.1016/j.measen.2023.100757)

Ensemble model

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317 , He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

erosion

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

erosion testers

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

erosive wear

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

Extreme learning machine (ELM)

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317 , He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

FEM-CFD

Zhang, Guangdong ORCID: 0000-0003-0285-6745 , Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: 0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-019-04785-w)

fine powders

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

fines contents

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

flow function

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

flow functions

Deng, Tong ORCID: 0000-0003-4117-4317 , Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

flowability

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

formulated powders

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

frequency domain analysis

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

gas-blast tester

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

granulated clay

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

High strain rate

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

high-speed impacts

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

Humidity influence

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

inductive charge sensor

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

inductive sensor

Jiang, Yang, Deng, Tong ORCID: 0000-0003-4117-4317 and Nasr, Karim ORCID: 0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:https://doi.org/10.1109/JSEN.2022.3162494)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

inverse design

Zhang, Guangdong ORCID: 0000-0003-0285-6745 , Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: 0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-019-04785-w)

linear regression model

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

Local model

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317 , He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

material handling process

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2023) Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. Nanomanufacturing, 3 (3). pp. 281-292. ISSN 2673-687X (Online) (doi:https://doi.org/10.3390/nanomanufacturing3030018)

Mechanical properties

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

metal target

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

methodology

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

Microstructures

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

modelling

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

Modes of flow

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

new caking tester

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

noise reduction

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:https://doi.org/10.1016/j.measen.2023.100757)

number

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

NURBS

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

optimized design method

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

packing fraction

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:https://doi.org/10.3390/pr11082276)

particle adhesion

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

particle breakage

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia.

particle degradation

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

particle dynamics

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Mike S.A. (2009) Understanding particle dynamics in erosion testers: a review of influences of particle movement on erosion test conditions. Wear, 267 (11). pp. 2132-2140. ISSN 0043-1648 (doi:https://doi.org/10.1016/j.wear.2009.02.020)

particle impact velocity

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

particle properties

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

particle shape

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

particle size

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

particle spin

Deng, Tong ORCID: 0000-0003-4117-4317 , Bingley, Mark S. and Bradley, Michael S. A. (2004) The influence of particle rotation on the solid particle erosion rate of metals. Wear, 256 (11-12). pp. 1037-1049. ISSN 0043-1648 (doi:https://doi.org/10.1016/S0043-1648(03)00536-2)

particulate clay

Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Berry, Rob and Kostuch, J. (2008) Caking strength of granulated clay under frozen conditions. Proceedings of the International Symposium Reliable Flow of Particulate Solids IV (RELPOWFLO IV) (Tromso, Norway 10-12 June, 2008). Telemark University College, Telemark, pp. 604-609. ISBN 9788272062896

particulate material

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Particulate materials

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

pharmaceutical powders

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

Deng, Tong ORCID: 0000-0003-4117-4317 , Paul, Kirsty A., Bradley, Michael S.A., Immins, Lee, Preston, Chris, Scott, Jerry F. and Welfare, Eloise H. (2010) Investigations on air induced segregation of pharmaceutical powders and effect of material flow functions. Powder Technology, 203 (2). pp. 354-358. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2010.05.028)

Physical properties

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

plastic caking

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

PM2.5 concentration prediction

Shang, Zhigen, Deng, Tong ORCID: 0000-0003-4117-4317 , He, Jianqiang and Duan, Xiaohui (2018) A novel model for hourly PM2.5 concentration prediction based on CART and EELM. Science of The Total Environment, 651 (2). pp. 3043-3052. ISSN 0048-9697 (Print), 1879-1026 (Online) (doi:https://doi.org/10.1016/j.scitotenv.2018.10.193)

pneumatic conveying

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia.

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

Pneumatic conveying characteristics

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

pneumatic conveying systems

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

pneumatic conveyors

Deng, Tong ORCID: 0000-0003-4117-4317 , Farnish, Richard J. and Bradley, Michael S.A. (2008) Evaluation of particle degradation due to high-speed impacts in a pneumatic handling system. Particulate Science and Technology, 26 (5). pp. 438-450. ISSN 0272-6351 (Print), 1548-0046 (Online) (doi:https://doi.org/10.1080/02726350802367522)

polyflow

Zhang, Guangdong ORCID: 0000-0003-0285-6745 , Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: 0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-019-04785-w)

Polymer Composites

Lakshman, Biju, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A., Okereke, Michael ORCID: 0000-0002-2104-012X and McIlhagger, A. T. (2014) Erosive wear of polymer composite materials and its correlation with high strain rate mechanical properties. In: 2nd International Conference on Abrasive Processes - ICAP 2014 (Programme and Abstract Book). ICAP, Cambridge, United Kingdom, p. 24.

Chen, Jinhu, Hutchings, Ian M., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S. A. and Koziol, Krzysztof K. K. (2014) The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites. Carbon, 73. pp. 421-431. ISSN 0008-6223 (doi:https://doi.org/10.1016/j.carbon.2014.02.083)

polymer extrusion die

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

Polymer–matrix composites

Chen, Jinhu, Trevarthen, James A., Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael S.A., Rahatekar, Sameer S. and Koziol, Krzysztof K.K. (2014) Aligned carbon nanotube reinforced high performance polymer composites with low erosive wear. Composites Part A: Applied Science and Manufacturing, 67. pp. 86-95. ISSN 1359-835X (doi:https://doi.org/10.1016/j.compositesa.2014.08.009)

powder

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) Measurement of electrostatic charge on particles using a novel approach. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

powder blending

Hussain, Tariq, Kaialy, Waseem, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Mike S.A., Nokhodchi, Ali and Armour-Chélu, David (2012) A novel sensing technique for measurement of magnitude and polarity of electrostatic charge distribution across individual particles. International Journal of Pharmaceutics, 441 (1-2). pp. 781-789. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2012.10.002)

Powder flowability

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

powder spreading

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:https://doi.org/10.3390/pr11082276)

predicting

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

prediction model

Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2021) A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Powder Technology. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.10.027)

preventing wear

Bradley, Michael, Farnish, Richard and Deng, Tong ORCID: 0000-0003-4117-4317 (2011) Predicting and preventing wear in pneumatic conveying systems. In: BulkSolids India 2011, 6-8 April 2011, Mumbai, India. (Unpublished)

profile extrusion dies

Zhang, Guangdong ORCID: 0000-0003-0285-6745 , Huang, Xiang, Li, Shuanggao, Xia, Chao and Deng, Tong ORCID: 0000-0003-4117-4317 (2020) Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. The International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 2909-2919. ISSN 0268-3768 (Print), 1433-3015 (Online) (doi:https://doi.org/10.1007/s00170-019-04785-w)

response surface methodology

Zhang, Guangdong, Huang, Xiang, Li, Shuanggao and Deng, Tong ORCID: 0000-0003-4117-4317 (2019) Optimized design method for profile extrusion die based on NURBS modeling. Fibers and Polymers, 20 (8). pp. 1733-1741. ISSN 1229-9197 (Print), 1875-0052 (Online) (doi:https://doi.org/10.1007/s12221-019-1168-y)

roasted coffee beans

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

rolling segregation

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

sampling

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

segregation

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

segregation index

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

segregations in process

Deng, Tong ORCID: 0000-0003-4117-4317 , Massaro Sousa, Lucas ORCID: 0000-0002-4182-9347 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2023) Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. International Journal of Pharmaceutics, 647:123544. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2023.123544)

shear cell tests

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

signal restoration

Jiang, Yang, Deng, Tong ORCID: 0000-0003-4117-4317 and Nasr, Karim ORCID: 0000-0002-8604-6274 (2022) Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. IEEE Sensors Journal, 23 (5). 4540 -4547. ISSN 1530-437X (Print), 1558-1748 (Online) (doi:https://doi.org/10.1109/JSEN.2022.3162494)

size and shape segregation

Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 , Cummins, John, Gallino, Enrico, Garg, Vivek ORCID: 0000-0002-8515-4759 , Deng, Tong ORCID: 0000-0003-4117-4317 , Hassanpour, Ali and Bradley, Michael (2023) Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. Processes, 11 (8):2276. pp. 1-22. ISSN 2227-9717 (Online) (doi:https://doi.org/10.3390/pr11082276)

Size influence

Deng, Tong ORCID: 0000-0003-4117-4317 and Bradley, Michael (2016) Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials. Powder Technology, 304. pp. 32-40. ISSN 0032-5910 (doi:https://doi.org/10.1016/j.powtec.2016.05.001)

small quantity of samples

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Diaz, Laura Pereira, Markl, Daniel, Brown, Cameron, Florence, Alastair and Bradley, Michael S.A. (2022) Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. International Journal of Pharmaceutics, 628:122309. ISSN 0378-5173 (doi:https://doi.org/10.1016/j.ijpharm.2022.122309)

solids particle impacts

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael (2024) Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. Lubricants, 12 (3):94. pp. 1-13. ISSN 2075-4442 (Online) (doi:https://doi.org/10.3390/lubricants12030094)

sphericity

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

sphericity ratio

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2020) An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Powder Technology, 379. pp. 307-320. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2020.10.077)

statistical analysis

Salehi, Hamid ORCID: 0000-0002-2516-6619 , Berry, Robert, Deng, Tong ORCID: 0000-0003-4117-4317 , Larsson, Sylvia H., Farnish, Richard and Bradley, Mike (2019) Development and application of a novel cake strength tester. Powder Technology, 350. pp. 36-42. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2019.03.024)

storage

Dissanayake Mudiyanselage, Susantha ORCID: 0000-0002-0953-379X , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid ORCID: 0000-0002-2516-6619 and Deng, Tong ORCID: 0000-0003-4117-4317 (2023) Frequency domain analysis to identify main segregation contributors in a chain of material handling. In: ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. ICBMH - The Institution of Engineers, Wollongong, NSW Australia, pp. 372-380. ISBN 978-1925627831

surface energy tester

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 and Bradley, Michael S.A. (2021) A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Powder Technology, 391. pp. 46-56. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.06.002)

surface segregation

Deng, Tong ORCID: 0000-0003-4117-4317 , Garg, Vivek ORCID: 0000-0002-8515-4759 , Salehi, Hamid ORCID: 0000-0002-2516-6619 and Bradley, Michael S. A. (2021) Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Powder Technology, 387. pp. 215-226. ISSN 0032-5910 (Print), 1873-328X (Online) (doi:https://doi.org/10.1016/j.powtec.2021.04.023)

time consolidation

Cai, Guohua, Berry, Robert and Deng, Tong ORCID: 0000-0003-4117-4317 (2016) Analysis on flowability of cement based on powder flow tester. China Powder Science and Technology, 22 (1):120. pp. 97-100. ISSN 1008-5548 (doi:https://doi.org/10.13732/j.issn.1008-5548.2016.01.023)

wavelet transform

Hussain, Tariq, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael, Armour-Chelu, David, Pillai, John, Saadat, Salman and Kaialy, Waseem (2023) Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Measurement: Sensors, 27:100757. pp. 1-4. ISSN 2665-9174 (Online) (doi:https://doi.org/10.1016/j.measen.2023.100757)

wood pellets

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia.

Singh, Gulab, Deng, Tong ORCID: 0000-0003-4117-4317 , Bradley, Michael and Ellis, Richard (2023) Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. Applied Sciences, 13:1960. pp. 1-13. ISSN 2076-3417 (Online) (doi:https://doi.org/10.3390/app13031960)

Deng, Tong ORCID: 0000-0003-4117-4317 , Alzahrani, Abdullah M. and Bradley, Michael S. (2018) Influences of environmental humidity on physical properties and attrition of wood pellets. Fuel Processing Technology, 185. pp. 126-138. ISSN 0378-3820 (doi:https://doi.org/10.1016/j.fuproc.2018.12.010)

This list was generated on Tue Mar 19 03:38:25 2024 UTC.