Skip navigation

Items where Author is "Alam, M.O."

Items where Author is "Alam, M.O."

Up a level
Export as [feed] RSS
Group by: Item Type | Uncontrolled Keywords | No Grouping
Number of items: 17.

Article

Stoyanov, Stoyan, Bailey, Chris, Alam, M.O., Yin, Chunyan, Best, Chris, Tollafield, Peter, Crawford, Rob, Parker, Mike and Scott, Jim (2013) Modelling methodology for thermal analysis of hot solder dip process. Microelectronics Reliability, 53 (8). pp. 1055-1067. ISSN 0026-2714 (doi:10.1016/j.microrel.2013.02.018)

Otiaba, Kenny C., Bhatti, R.S., Ekere, N.N., Mallik, S., Alam, M.O., Amalu, E.H. and Ekpu, M. (2012) Numerical study on thermal impacts of different void patterns on performance of chip-scale packaged power device. Microelectronics Reliability, 52 (7). pp. 1409-1419. ISSN 0026-2714 (doi:10.1016/j.microrel.2012.01.015)

Otiaba, K.C., Ekere, N.N., Bhatti, R.S., Mallik, S., Alam, M.O. and Amalu, E.H. (2011) Thermal interface materials for automotive electronic control unit: Trends, technology and R&D challenges. Microelectronics Reliability, 51 (12). pp. 2031-2043. ISSN 0026-2714 (doi:10.1016/j.microrel.2011.05.001)

Alam, M.O., Lu, Hua, Bailey, Chris and Chan, Y.C (2009) Finite-element simulation of stress intensity factors in solder joint intermetallic compounds. IEEE Transactions on Device and Materials Reliability, 9 (1). pp. 40-48. ISSN 1530-4388 (doi:10.1109/TDMR.2008.2010595)

Alam, M.O., Lu, H., Bailey, Chris and Chan, Y.C. (2009) Fracture mechanics analysis of solder joint intermetallic compounds in shear test. Computational Materials Science, 45 (2). pp. 576-583. ISSN 0927-0256 (doi:10.1016/j.commatsci.2008.12.001)

Zhong, W.H., Chan, Y.C., Wu, B.Y., Alam, M.O. and Guan, J.F. (2007) Multiple reflow study of ball grid array (BGA) solder joints on Au/Ni metallization. Journal of Materials Science, 42 (13). pp. 5239-5247. ISSN 0022-2461 (Print), 1573-4803 (Online) (doi:10.1007/s10853-006-1234-x)

Wu, B.Y., Chan, Y.C, Zhong, H.W. and Alam, M.O. (2007) Effect of current stressing on the reliability of 63Sn37Pb solder joints. Journal of Materials Science, 42 (17). pp. 7415-7422. ISSN 0022-2461 (Print), 1573-4803 (Online) (doi:10.1007/s10853-007-1836-y)

Wu, B.Y., Chan, Y.C., Zhong, H.W., Alam, M.O. and Lai, J.K.L. (2007) Study of the thermal stress in a Pb-free half-bump solder joint under current stressing. Applied Physics Letters, 90 (23). ISSN 000-6951 (doi:10.1063/1.2747183)

Alam, M.O., Wu, B.Y., Chan, Y.C. and Tu, K.N. (2005) High electric current density-induced interfacial reactions in micro ball grid array (μBGA) solder joints. Acta Materialia, 54 (3). pp. 613-621. ISSN 1359-6454 (doi:10.1016/j.actamat.2005.09.031)

Alam, M.O., Chan, Y.C. and Tu, K.N. (2003) Effect of 0.5 wt % Cu addition in Sn–3.5% Ag solder on the dissolution rate of Cu metallization. Journal of Applied Physics, 94 (12). pp. 7904-7909. ISSN 0021-8979 (Print), 1089-7550 (Online) (doi:10.1063/1.1628387)

Yin, C.Y., Alam, M.O., Chan, Y.C., Bailey, C. and Lu, Hua (2003) The effect of reflow process on the contact resistance and reliability of anisotropic conductive film interconnection for flip chip on flex applications. Microelectronics Reliability, 43 (4). pp. 625-633. ISSN 0026-2714 (doi:10.1016/S0026-2714(02)00348-7)

Alam, M.O., Chan, Y.C. and Hung, K.C. (2002) Reliability study of the electroless Ni–P layer against solder alloy. Microelectronics Reliability, 42 (7). pp. 1065-1073. ISSN 0026-2714 (doi:10.1016/S0026-2714(02)00068-9)

Book Section

Alam, M.O. and Bailey, C. (2011) Introduction to adhesives joining technology for electronics. In: Alam, M.O. and Bailey, C., (eds.) Advanced adhesives in electronics: Materials, properties and applications. Woodhead Publishing Limited, Cambridge, UK. ISBN 9781845695767

Bailey, C. (2011) Modelling techniques used to assess conductive adhesive properties. In: Alam, M.O. and Bailey, C., (eds.) Advanced adhesives in electronics: Materials, properties and applications. Woodhead Publishing Limited, Cambridge, UK. ISBN 9781845695767

Edited Book

Alam, M.O. and Bailey, C. (eds.) (2011) Advanced adhesives in electronics, materials, properties and applications. Woodhead Publishing Limited, Cambridge, UK. ISBN 9781845695767

Conference Proceedings

Stoyanov, Stoyan, Best, Chris, Yin, Chunyan, Alam, M.O., Bailey, Chris and Tollafield, Peter (2012) Experimental and modelling study on the effects of refinishing lead-free microelectronic components. In: 2012 4th Electronic System-Integration Technology Conference (ESTC). Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA. ISBN 9781467346450 (doi:10.1109/ESTC.2012.6542213)

Alam, M.O., Lu, Hua, Bailey, Christopher and Chan, Y.C. (2008) Fracture mechanics analysis of cracks in solder joint intermetallic compounds. In: 2nd Electronics System-Integration Technology Conference, 2008. ESTC 2008. Institute of Electrical and Electronics Engineers, Inc., Piscataway, NJ, USA, pp. 757-762. ISBN 978-1-4244-2813-7 (doi:10.1109/ESTC.2008.4684445)

This list was generated on Fri Jun 22 08:43:47 2018 BST.