Skip navigation

Extendible operation sequencing for turn-milled components

Extendible operation sequencing for turn-milled components

Mwinkuka, T., Hinduja, S. and Owodunni, Oladele (2007) Extendible operation sequencing for turn-milled components. CIRP Annals - Manufacturing Technology, 56 (1). pp. 473-478. ISSN 0007-8506 (doi:https://doi.org/10.10.1016/j.cirp.2007.05.113)

Full text not available from this repository.

Abstract

Research in operation sequencing has hitherto been based on fixed heuristics with no obvious scientific basis. Often, the heuristics contain no technological considerations. This paper provides a scientific approach for the sequencing of features based on maximising the stiffness of the intermediate component. In the case of intersecting feature volumes, preference is given to a feature with a lower machining cost. This scientific approach is embedded within a flexible environment in which heuristic rules can be constructed from a rich vocabulary covering geometric and technological attributes, without the need for additional programming. Examples illustrating the capabilities of the system are described.

Item Type: Article
Uncontrolled Keywords: CAPP, operation sequencing, customisation
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Pre-2014 Departments: School of Engineering
School of Engineering > Department of Engineering Systems
Related URLs:
Last Modified: 08 Oct 2019 09:29
URI: http://gala.gre.ac.uk/id/eprint/6392

Actions (login required)

View Item View Item