Skip navigation

Analysis of semi-rigid steel frames and criteria for their design

Analysis of semi-rigid steel frames and criteria for their design

Anderson, David and Benterkia, Zoubir (1991) Analysis of semi-rigid steel frames and criteria for their design. Journal of Constructional Steel Research, 18 (3). pp. 227-237. ISSN 0143974X (doi:10.1016/0143-974X(91)90027-X)

Full text not available from this repository.

Abstract

This paper reports studies on unbraced semi-rigid steel frames, carried out to determine criteria for their design. The analyses of the frames were performed by a computer program that uses a secant-stiffness approach to allow for the effect of semi-rigid connections on frame behaviour. A parameter entitled ‘degree of flexibility’ is introduced as a measure of the effect of semi-rigid joints on the stiffness of the frame. Within the limits of the study, it is demonstrated that second-order effects will not be significant if the semi-rigid elastic critical load exceeds ten times the design load, and the degree of flexibility is less than 50%. This last requirement was satisfied by extended end-plate beam-to-column connections. It has also been found that, under combined loading, the serviceability limit on sway is likely to control design, rather than ultimate strength.

Item Type: Article
Additional Information: [1] Paper presented at the International Colloquium on Stability of Steel Structures held in Budapest, Hungary, 1990.
Uncontrolled Keywords: semi-rigid steel frames, criteria for design
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Faculty / Department / Research Group: Faculty of Engineering & Science
Related URLs:
Last Modified: 14 Oct 2016 09:31
Selected for GREAT 2016: None
Selected for GREAT 2017: None
Selected for GREAT 2018: None
URI: http://gala.gre.ac.uk/id/eprint/13085

Actions (login required)

View Item View Item